• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.730-733
• /
• 2001

Separation of PET and PVC is a key technology to achieve effective plastics recycling but no efficient and economically feasible method has been developed yet. The application of flotation was investigated by many researchers but the causes of the selectivity were not clarified. This paper described the adsorption mechanism of wetting agents onto plastics, using the agents which have various polarity and hydrocarbon chain length. It was found that (1) hydrophobic interaction played a predominant role for the adsorption, (2) anionic wetting agents could be adsorbed onto negatively charged plastics with the polar radicals oriented outer part of the plastics, then often depressed plastics more effectively than cationic agents, and (3) PET and PVC could be separated with dodecyamine hydrochloride and sodium dodecyl- sulfonate in the concentration ranges of 1.0$\times$10$^{[-10]}$ $^{6}$ -5.0$\times$10$^{[-10]}$ $^{5}$ and 2.0$\times$10$^{[-10]}$ $^{6}$ -1.0$\times$10$^{[-10]}$ $^{5}$ mo1/1, respectively.

• STI Policy Review
• /
• v.1 no.3
• /
• pp.39-51
• /
• 2010

Korea faces challenges from the recent development catch-up countries and the absence of catch up incentives. For Korea to solve the issue of post catch-up problems and create a new development path based on creative innovation, there is an urgent need to secure a system design capability for the production of creative knowledge and talent that can create a competitive society. However, the conservative inclination and a lack of a customer-oriented attitude of Korean universities and professors leads to a standardization of talent and a passive restructuring of the curriculum by universities instead of a direct correspondence with the demands of companies and society. The compatibility of Korean university education with the demands of society remains the lowest in the world and creative education in Korea faces a difficult situation. The world is transforming from a knowledge-based economy to a creativity-based economy and a competitive society will led by creativity, not by knowledge. The success of a country in nurturing creative talent will determine its future national competitiveness. For Korea to be become a global leader in the new era of creativity, it needs to make proactive preparations. It is imperative for Korea to transform the educational system from the previous cramming system to a creativity-nurturing system.

• Journal of the Korea Society of Computer and Information
• /
• v.8 no.4
• /
• pp.28-34
• /
• 2003

ASN.1 is the most fundamental technology in network management. The develoment of ASN.1 environment requires three steps : compiler work to parse ASN.1 languages, updating database with the parsing results, and pretty-printing work for data in the database. This paper presents the design and implementation of the translator which automatically translates the specification of ASN.1 to the object-oriented language C++. This system provides a total environment including for various graphic user interface, DB interface, browser to develop ASN.1 for development environment of ASN.1 For the implementation, Objectivity DB is used for database, flex and yacc for compiling, and Tcl/Tk for user interface.

• Journal of Magnetics
• /
• v.9 no.2
• /
• pp.60-64
• /
• 2004

In this paper calculations of magnetisation and magnetoresistance characteristics of the Spin Valve (SV) and Pseudo Spin Valve (PSV) spintronics structures are reported and compared with the experimental data. The magnetisation reversal process was analysed with respect to the Stoner- Wohlfahrt model of total surface energy in terms of uniaxial anisotropy, exchange coupling between ferromagnetic layers, unidirectional exchange anisotropy of pinned layer (modelled by exchange coupling between magnetisation of pinned layer and net magnetisation of antiferromagnetic layer with high anisotropy). The numerical simulation of the model to the experimental magnetisation data yielded the above parameters for SV and PSV structures. These parameters were used to more sophistically micromagnetic modelling tool originating from the project called Object Oriented Micromagnetic Framework. Influence of the shape anisotropy of the Magnetic Tunnelling Junction cell used in MRAM was simulated by means of micromagnetic simulations. Results were compared to those obtained from the spot Kerr measurements.

• Journal of The Korean Society of Integrative Medicine
• /
• v.8 no.1
• /
• pp.219-228
• /
• 2020

Purpose : This study highlights the importance of occupational therapy at adult day care centers by examining the current state of this therapy at these centers. Methods : Data on 1,527 adult day care centers in South Korea were retrieved from a long-term care insurance site for the elderly and were statistically processed. Results : Of these centers, 1,331 (87.2 %) were cognitive activity-oriented, 37 (2.4 %) were exclusively for dementia treatment, and 159 were nonspecialized centers (10.4 %). A second finding was that 294 (19.3 %) of the centers operated occupational therapy programs. Third, only 40 occupational therapists (2.6 %) were working at one of these 1,527 care centers nationwide. Fourth, the occupational therapy programs comprised 4.91 ± 3.93 cognitive enhancement programs per center, 2.58 ± 2.26 training assistance programs per center, and other programs 2.56 ± 2.58 per center. Fifth, a regional comparison of the operation of occupational therapy programs at these centers showed a statistically significant difference in the number of programs between Seoul and other regions. Conclusion : Although most adult day care centers currently deliver cognitive enhancement programs, they show a low employment rate of occupational therapists. Therefore, additional research involving workers at adult day care centers is required to investigate perceptions and the necessity of occupational therapy.

• Journal of Sensor Science and Technology
• /
• v.4 no.2
• /
• pp.45-50
• /
• 1995

The excellent c-axis oriented zinc oxide thin films were prepared by the RF magnetron sputtering method on glass substrates. Optimum fabrication conditions of the ZnO films were such that RF power, substrate temperature, and gas pressure of mixture Ar(50%):$O_{2}$(50%) were 150 W, $200^{\circ}C$, and 5 mTorr, respectively. In these conditions, the deposition rate was $310\;{\AA}/min$, and the resistivity of the film was $1{\times}10^6\;{\Omega}{\cdot}cm$. The ZnO film also showed high c-axis orientation and crystalinity according to XRD pattern and SEM photograph. A fabricated interdigital transducer generated 1st mode surface acoustic wave at 46.6 MHz and 2nd mode surface acoustic wave at 52.5 MHz. At the 1st mode, the phase velocity of surface acoustic wave and the electromechanical coupling coefficient were 2795 m/sec and 0.031 %, respectivly. At the 2nd mode, they were 3149 m/sec and 0.019 %. respectivly.

• Journal of Sensor Science and Technology
• /
• v.16 no.3
• /
• pp.234-239
• /
• 2007

Crystallographically {h00}-oriented $0.94(Bi_{0.5}Na_{0.5})TiO_{3}-0.06BaTiO_{3}$ (0.94BNT-0.06BT) ceramics was prepared by the Reactive Templated Grain Growth (RTGG) method using the $Bi_{4}Ti_{3}O_{12}$ template. The sheets prepared by tape-casting of slurries containing the templates and starting materials are cut, laminated, and pressed. Then burn-out and sintering was conducted. Also, to compare with the 0.94BNT-0.06BT ceramics prepared by the RTGG method another 0.94BNT-0.06BT ceramics was prepared by the solid-state method. In the optimum of this experiments range, the degree of orientation of the 0.94BNT-0.06BT ceramics prepared by the RTGG method was texture fraction${\approx}92%$ and the piezoelectric constant($d_{33}$) and coupling factor($k_{p}$) was obtained to $d_{33}{\approx}205{\;}pC/N$, $k_{p}{\approx}0.33%$, respectively.

• Journal of Welding and Joining
• /
• v.32 no.5
• /
• pp.58-64
• /
• 2014

The shipbuilding industry is facing the various problems of less demand and oversupply owing to the global economic crisis and the increase in shipbuilding countries. Shipyards of the industry are making effort to strengthen their ability to handle the crisis via a smartwork technology for flexible working environment. In this study, we developed a smartwork system that manages the information in shipbuilding process with mobile devices such as smart phones and tablet PCs. To successfully apply the developed smartwork system to shipyards, we analyzed several best practices and management tasks of the shipbuilding processes. The developed system was designed by CBD approach that is a branch of service-oriented software engineering for reusability and flexibility on the system. As it is designed considering the flexible working environment, it supports to increase their productivity by reducing the time required to carry out tasks and by increasing the mobility required to manage work performance in field of shipyards.

• Korean Institute of Interior Design Journal
• /
• v.13 no.6
• /
• pp.175-183
• /
• 2004

As the information-oriented society makes progress, the role of Image has much influence on human being in space as a medium for information delivery and a means of artistic communication. These influences are appeared as expressional characteristics of the image such as the reproducibility of reality and unreality in the real world, the synchrony of expression of time, visual formality, a sign and the transmission of moaning. For these, the investigator examined the meaning of image in aspace, taking into consideration of the interrelationship of image, space, and human being. As study findings show, the expressional characteristics of image in space have such visual effects as a space in which pictorial formality and object exists, in which the mutual understanding of communication exists, and that realizes immaterial membrane in the aspect of time and space, according to the electronic light, color, and formation of the image media. In addition, it become clear that the characteristic could be staged on various circumstances by constructing the relationship between an object and a point of time interactively with bidirectional communication through combining technology and art. This suggests that the image develops as the form of sensory communication via interacting of space and human being.

• Journal of Korea Multimedia Society
• /
• v.18 no.12
• /
• pp.1547-1554
• /
• 2015

Because there are numerous near field communication (NFC) technical standards and each standard has an independent communication protocol, an NFC software for controlling the protocols are significantly complicated. Especially, the anticollision algorithm for establishing the initial communication connection is classified into bit-oriented or time slot method according to the technical standards. Moreover, the anticollision algorithm is generally manipulated in software because of its complexity. In addition, since one host processor is shared by multiple modems in a connectivity SoC, embedding several communication modems with an NFC modem, the spare computing resources can be utilized for other modems by reducing the software cost to control the NFC modem. In this paper, we propose new design methods of the NFC modem for supporting anticollision, framing and bit rate detection in the hardware to reduce the software overhead. Therefore, the utilization of the NFC technology is enhanced in the connectivity SoC by minimizing the cost of software.