• Journal of Technologic Dentistry
• /
• v.23 no.2
• /
• pp.151-160
• /
• 2002

The purpose of this study was to evaluate the influence of sprue joint form on castability in dental prosthetics. The researcher carried out experimental study according to the type was divided by sprue joint form. Therefore type A was made thicken than sprue diameter of type B and type C was made it conversely. The results were as follows: 1. In the order of castability, type C(87.8%) was first and then type A(87.0%) and type B(79.2%) was last. However there was no significant difference statistically. 2. If reservior was located at the correct position and in sufficient size, internal shrinkage porosity in the casting bodies were not generated in the type of all. 3. At the reservoir, internal shrinkage porosity was generated first in type A, followed by type Band type C in the order named. Although it gives no impact on casting body, porosity seems to appear the least when it's produced in the form of type C.

• Journal of Industrial Technology
• /
• v.30 no.A
• /
• pp.111-117
• /
• 2010

To improve the performance of the prediction system, the system should reflect well the uncertainty of nonlinear data. Thus, this paper presents multiple prediction systems based on Type-2 fuzzy sets. To construct each prediction system, an Interval Type-2 TSK Fuzzy Logic System and difference data were used, because, in general, it has been known that the Type-2 Fuzzy Logic System can deal with the uncertainty of nonlinear data better than the Type-1 Fuzzy Logic System, and the difference data can provide more steady information than that of original data. Also, to improve each rule base of the fuzzy prediction systems, the HCBKA (Hierarchical Correlation Based K-means clustering Algorithm) was applied because it can consider correlationship and statistical characteristics between data at a time. Subsequently, to alleviate complexity of the proposed prediction system, a system selection method was used. Finally, this paper analyzed and compared the performances between the Type-1 prediction system and the Interval Type-2 prediction system using simulations of three typical time series examples.

• Journal of the Korean Institute of Educational Facilities
• /
• v.23 no.4
• /
• pp.3-10
• /
• 2016

This paper presents the investigation results on the classification of the university campuses. For the classification, we selected the spatial index as the evaluation indicator since the environmental factors and maintenance methods vary from university campus to university campus. For the study, we used eight spatial indices of the 30 national universities. This paper provides the spatial characteristics of different campus types, presents campus classification analysis as a future research approach to campus maintenance, and provides the data for the future study of comparison among universities. The results are as follows. 1) The classification investigation categorized the university campuses into three groups. Type 1 is a large-scale type, located near downtown. Type 2 is a medium-scale type, located at a remote site from downtown. Type 3 is a small-scale type, which is located comparatively near downtown. 2) Type 1 is a large-scale mixed area type, and 13 universities belong to this group. Type 2 is a medium-scale suburban area type, and six universities are in this group. Finally, Type 3 is a small-scale downtown area type, and 11 universities belong to this group.

• Journal of Power System Engineering
• /
• v.17 no.3
• /
• pp.50-56
• /
• 2013

The analysis of performance characteristics was carried out in the plate type evaporator with counter and parallel flow. To investigate performance of evaporator with water inlet temperature and refrigerant mass flow rate were changed. As a result, when the inlet temperature of water is $8^{\circ}C$, capacity of parallel flow evaporator higher than counter flow is 0.35%. But as the inlet temperature of water rises from $8^{\circ}C$ to $16^{\circ}C$, capacity of counter flow type evaporator higher than parallel flow type is 0.12%, 0.27%, 1.1%, 1.6%, respectively. The findings showed that counter flow type evaporator has a larger capacity than those that were parallel flow type evaporator. As the refrigerant mass flow rate rises, capacity and pressure drop increases in the counter and parallel flow type evaporator.

• Journal of Technologic Dentistry
• /
• v.35 no.3
• /
• pp.201-207
• /
• 2013

Purpose: In this study, the loosening torque test was conducted with three implant products that are produced, approved and sold in Korea, which are manufactured in different fixture and abutment tightening methods (internal submerged type, internal morse taper type, and external type) to examine the loosening torque of the screw according to the method of tightening the implant fixture and abutment. Methods: In the loosening torque test, the three types of fixtures and abutments with different tightening methods were tightened by rotating them clockwise with a $30N{\cdot}cm$ force using a driver equipped with an electric torque meter. The results of the test are as follows. Results: The loosening torque values of the internal submerged type, internal morse taper type and external type implants were $24.10{\pm}0.742N{\cdot}cm$, $29.10{\pm}1.710N{\cdot}cm$, and $26.60{\times}1.636N{\cdot}cm$, respectively. Conclusion: The screw loosening torque values of the three fixture and abutment tightening methods were analyzed via Kruskal Wallis test layout, and they were significantly different (p<0.05).

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.325-328
• /
• 2007

We discuss the Normalized Difference Vegetation Index (NDVI) of the forest canopy and floor separately based on airborne spectral reflectance measurements and simultaneous airborne land surface images acquired around Yakutsk, Siberia in 2000. The aerial land surface images were visually classified into four forest types: no-green canopy and snow floor (Type-1), green canopy and snow floor (Type-2), no-green canopy and no-snow floor (Type-3), and green canopy and no-snow floor (Type-4). The mean NDVI was calculated for these four types. Although Type-2 had green canopy, the NDVI was rather small (0.17) because of high reflection from the snow cover on the floor. Type-3, which had no green canopy, indicated considerably large NDVI (0.45) due to the greenness of the floor. Type-4 had the largest NDVI (0.75) because of the greenness of both the canopy and floor. These results reveal that the NDVI depends considerably on forest floor greenness and snow cover in addition to canopy greenness.

• Journal of Technology Innovation
• /
• v.4 no.1
• /
• pp.1-26
• /
• 1996

Traditional studies of new venture performance have focused on the characteristics of entrepreneurs and have shown conflicting results on the relationship between the characteristics and performance of new ventures. Recently, some researchers have broadened their search to include aspects of the industry and the strategy of new ventures. The purposes of this study are to identify wtrategic archetypes of new ventures based on the taxonomic approach and to explain the differences in new venture characteristics and performance among strategic archetypes. To find the strategic archetypes, 114 new venture CEOs from various industries were asked to describe their ventures' competitive strategy through 19 questionnaire items on competitive methods. Using factor analysis and subsequent cluster analysis, four archetypes were identified such as : versatile type, technology-driven type, market-oriented type, and cost reduction type. The results imply that there exist different types of venture strategy even among new technology-based venture firms in Korea, and show the differences in performance among strategic archetypes: market-oriented type and versatile type are better than cost reduction type in terms of growth rate and profitability. Because the venture strategy in identified as a major determinant of the venture performance in this study, the choice of venture strategy suitable for firm's industrial characteristics and internal resource bases becomes a very strategic decision for firm's sustained growth. Further studies are needed to strengthen some methodological limitations of the study.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.14 no.1
• /
• pp.39-47
• /
• 2006

Recent trend in pursuit of high performance and effectiveness for automotive cooling system has changed the application of material for impeller of automotive water pump from metal to high ability engineering resin, which can achieve optimization of design of impeller geometry and realize lightweight high efficiency water pump. Closed type water pump improves hydraulic loss of fluid through the clearance between volute casing and impeller compared with that of the existing open type water pump(Although closed type is heavier than open type for the same size and same material, adoption of plastics can solve the problem.). In the present study, the characteristics of hydraulic performance of closed type water pump were investigated with respect to the angle between shroud and hub of impeller and the shape of discharge port of volute casing. Performance tests were carried out for 4 cases, that is, for 2 impellers and 2 casings. The modification of shape of only discharge port can enhance the hydraulic performance by 10 percent and the pump efficiency by 4-6 percent.

• The Plant Pathology Journal
• /
• v.38 no.2
• /
• pp.78-89
• /
• 2022

Phaeosphaeria species are pathogenic on wheat, barley and a wide range of wild grasses. To analyze mating type loci of the Phaeosphaeria species and investigate mating type distribution in Iran, we sequenced mating type loci of 273 Phaeosphaeria isolates including 67 isolates obtained from symptomatic leaves and ears of wheat, barley, and wild grasses from two wheat growing region in Iran as well as 206 isolates from our collection from other regions in Iran which were isolated in our previous studies. Mating type genes phylogeny was successfully used to determine the species identity and relationships among isolates within the Phaeosphaeria spp. complex. In this study, we reported seven new host records for Phaeosphaeria species and the Phaeosphaeria avenaria f. sp. tritici 3 group was first reported from Iran in this study. Mating type distribution among Phaeosphaeria species was determined. Both mating types were present in all sampling regions from Iran. We observed skewed distribution of mating types in one region (Kohgiluyeh va Boyer-Ahmad) and equal distribution in the other region (Bushehr). However, when considering our entire dataset of 273 Iranian Phaeosphaeria isolates, the ratio of mating types was not deviated significantly from 1:1 suggesting possibilities for isolates of opposite mating type to interact and reproduce sexually, although the sexual cycle may infrequently occur in some regions especially when the climatic conditions are unfavorable for teleomorph development.

• Laser Solutions
• /
• v.15 no.1
• /
• pp.20-22
• /
• 2012

This papers show new technology of thin disk type resonator lasers which are well kwon technology by TRUMPF.