• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.148-148
• /
• 2008

Low-k dielectric materials are an alternative plan to improve the signal propagation delay, crosstalk, dynamic power consumption due to resistance and parasitic capacitance generated the decrease of device size. Now, various materials is studied for the next generation. Diethoxymethlysiliane (DEMS) precursor using this study has two ethoxy groups along with one methyl group attached to the silicon atoms. SiCOH thin films were deposited on p-type Si(100) substrate by Plasma Enhanced Chemical Vapor Deposition (PECVD) using DEMS. In this study, we studied the effect of oxygen($O_2$) flow rate for DEMS to characteristics of thin films. The characteristics of thin films deposited using DEMS and $O_2$ evaluated through refractive index, dielectric constant(k), surface roughness, I-V(MIM:Al / SiCOH / Ag), C-V(MIM), deposition rate.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.7
• /
• pp.3329-3350
• /
• 2017

Installing caching and computing facilities in mobile edge networks is a promising solution to cope with the challenging capacity and delay requirements imposed on future mobile communication systems. The problem of optimal facility placement in mobile edge networks has not been fully studied in the literature. This is a non-trivial problem because the mobile edge network has a unidirectional topology, making existing solutions inapplicable. This paper considers the problem of optimal placement of a fixed number of facilities in a mobile edge network with an arbitrary tree topology and an arbitrary demand distribution. A low-complexity sequential algorithm is proposed and proved to be convergent and optimal in some cases. The complexity of the algorithm is shown to be $O(H^2{\gamma})$, where H is the height of the tree and ${\gamma}$ is the number of facilities. Simulation results confirm that the proposed algorithm is effective in producing near-optimal solutions.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.8
• /
• pp.1355-1362
• /
• 2000

Microstrip antennas are attractive for many applications because of their compact size, low profile, and light weight. Recently, the demand for the miniaturization of the personal communication equipment has been increasing along with the proliferation of personal communication systems. Thus, the development of small antenna has been highly demanded. In this paper, a new technique to reduce the overall dimension of a microstrip antenna with a locally non-homogeneous substrate configuration is proposed. The miniaturized microstrip antenna for a repeater system in a mobile communication cellular band(824~894 MHz) is designed with the proposed technique, and commercialized with low cost, light weight, and small size. Comparison between simulations, based on Agilent Technologies HFSS software, and measurements are provided. The proposed method will be more attractive for a light-weight, small-size, and low-cost microstrip array design. This paper also presents the bandwidth improvement technique for under-coupled microstrip patch antenna with a tuning stub.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.536-539
• /
• 2018

In this paper, we propose a system that analyzes environment information by using deep learning and then provides a suitable environment for users by predicting environmental information change. As the level of living improves, interest in improving the quality of life is increasing. In particular, as the air quality deteriorated due to the recent occurrence of dust, smog, fine dust, and ultrafine dust, the indoor air quality as well as the outdoor air became a serious problem. The increase of indoor pollution due to the lack of ventilation and the use of chemicals is a serious problem for modern people who have a lot of indoor living. In order to solve this indoor air pollution, a system has been proposed that measures the state of air quality through sensors and maintains proper temperature and humidity. However, existing system has a difficulty to apply most of the atmospheric environment information to various users depending on sensors only. The system proposed in this paper predicts the indoor environment by analyzing the indoor pollution information collected through the sensor using the deep learning. Then, the predicted indoor environment is modeled and learned in this system, and the environment suitable for the user is suggested. Afterwards, the system receives feedback from the user and repeats the process of re-learning the proposed environment so that it can create the optimal environment for the user.

• Journal of Korean Home Economics Education Association
• /
• v.13 no.1
• /
• pp.25-37
• /
• 2001

This study is based on education reforms related to strengthening information education in curriculums. This study develops and presents ' General Economics'Model Utilizing ICT(Information Communication & Technology) in Home Economics'which could be used as a concrete guidance and direction in teaching and learning Economics education in schools. To do so, this study reviews the necessity of adopting ICT in Home Economics instructional activities and it also reviews and analyzes previous studies of how ICT contribute to instructional activities. Such analysis was used as a theoretical basis for the Instructional Model. The Tool of ICT is a useful instructional strategy because it allows the learners'self-lead learning and Performance Assessment. Therefore the 'General Instructional Model Utilizing ICT'interprets the role of ICT tools to adequate class activities in each step of instruction which includes the conventional steps of introduction. development review and evaluation. It also develops and presents Lesson Plan that can be adopted in school education and thereby shows the possibility of practical application of the theory. This study has limits in that the Instructional Model and Lesson Plan are theoretical in nature. Therefore, in future studies it is desirable to critically review the Instructional Model an Lesson Plan and prove their applicability in real classes and the real learning effects.

• Transactions on Electrical and Electronic Materials
• /
• v.14 no.4
• /
• pp.203-207
• /
• 2013

P-type Si wafers were dipped in HF solution. The minority carrier lifetime (lifetime) increased after HF treatment due to the hydrogen termination effect. To investigate the film passivation effect, PECVD was used to deposit $SiN_x$ on both HF-treated and untreated wafers. $SiN_x$ generally helped to improve the lifetime. A thermal process at $850^{\circ}C$ reduced the lifetime of all wafers because of the dehydrogenation at high temperature. However, the HF-treated wafers showed better lifetime than untreated wafers. PERCs both passivated and not passivated by HF treatment were fabricated on the rear side, and their characteristics were measured. The short-circuit current density and the open-circuit voltage were improved due to the effectively increased lifetime by HF treatment.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.6
• /
• pp.1654-1658
• /
• 2014

High value-added aromatic aldehydes (e.g. vanillin and syringaldehyde) were produced from heavy fraction of bio-oil (HFBO) via catalytic oxidation. The concept is based on the use of metalloporphyin as catalyst and hydrogen peroxide ($H_2O_2$) as oxidant under alkaline condition. The biomimetic catalyst cobalt(II)-sulfonated tetraphenylporphyrin ($Co(TPPS_4)$) was prepared and characterized. It exhibited relative high activity in the catalytic oxidation of HFBO. 4.57 wt % vanillin and 1.58 wt % syringaldehyde were obtained from catalytic oxidation of HFBO, compared to 2.6 wt % vanillin and 0.86 wt % syringaldehyde without $Co(TPPS_4)$. Moreover, a possible mechanism of HFBO oxidation using $Co(TPPS_4)/H_2O_2$ was proposed by the research of model compounds. The results showed that this is a promising and environmentally friendly method for production of aromatic aldehydes from HFBO under $Co(TPPS_4)/H_2O_2$ system.

• Particle and aerosol research
• /
• v.5 no.4
• /
• pp.171-178
• /
• 2009

$PM_{2.5}$ is one of critical air pollutants due to its high absorbability of heavy metallic fumes, PAH and bacillary micro organisms. Such a fine particulate matter is often formed through various nucleation processes including condensation. This study attempts to find the nucleation behaviors of $PM_{2.5}$ arisen from coal power stations using a classical heterogeneous Fletcher's theory. The numerical simulation by C-language could approximate the nucleation process of $PM_{2.5}$ from water vapor, of which approach revealed the required energy for embryo formation and embryo size and nucleation rate. As a result of the calculation, it was found that wetting agents could affect the particle nucleation in vapor condensation. In particular, critical contact angle relates closely with the vapor saturation. Particle condensation could be reduced by lowering the angles. The wetting agents aid to decrease the contact angle and surface tensions, thereby may contribute to save the formation energy.

• Annual Conference of KIPS
• /
• 2022.11a
• /
• pp.188-190
• /
• 2022

본 연구에서는 정전류(Constant Current) 방식에 전압강하법을 이용하여 접촉저항 측정 시스템을 구현하고 측정값을 블루투스 통신을 통해 안드로이드 운영체제에서 확인할 수 있도록 앱을 개발한다. 측정가능한 범위로 0 Ω에서 10.24 Ω 사이의 접촉 저항을 MCP3424 18 bit 분해능 ADC를 사용하여 측정할 수 있도록 설계하였다. 기존에는 반고정 저항과 별도의 전류계를 이용하여 정전류를 설정하였으나, 본 연구에서는 측정의 정밀도 및 편리성 개선을 위해 0.1% 고정밀 고정저항을 병렬로 4개 연결하여 구현하였으며, 또한 1:1 Unity Gain Buffer를 구성하고 Ultra High Precision Z-Foil 방식으로 오차 0.01%, 온도 계수 0.05 ppm/℃ 저항을 사용하여 실제로 측정한 샘플 저항 값의 결과를 확인하였다.

• Journal of Surface Science and Engineering
• /
• v.56 no.3
• /
• pp.192-200
• /
• 2023

Graphene, a two-dimensional material, has shown great potential in a variety of applications including microelectronics, optoelectronics, and graphene-based batteries due to its excellent electronic conductivity. However, the production of large-area, high-quality graphene remains a challenge. In this study, we investigated graphene growth on electrolytic copper foil using thermochemical vapor deposition (TCVD) to achieve a similar level of quality to the cold-rolled copper substrate at a lower cost. The combined effects of pre-annealing time, graphenized temperature, and partial pressure of hydrogen on graphene coverage and domain size were analyzed and correlated with the roughness and crystallographic texture of the copper substrate. Our results show that controlling the crystallographic texture of copper substrates through annealing is an effective way to improve graphene growth properties, which will potentially lead to more efficient and cost-effective graphene production. At a hydrogen partial pressure that is disadvantageous in graphene growth, electrolytic copper had an average size of 8.039 ㎛², whereas rolled copper had a size of 19.092 ㎛², which was a large difference of 42.1% compared to rolled copper. However, at the proper hydrogen partial pressure, electrolytic copper had an average size of 30.279 ㎛² and rolled copper had a size of 32.378 ㎛², showing a much smaller difference of 93.5% than before. This observation suggests this potentially leads the way for more efficient and cost-effective graphene production.