• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.9
• /
• pp.3138-3150
• /
• 2021

Multimedia services on the Internet are continuously increasing. Accordingly, the demand for a technology for efficiently delivering multimedia traffic is also constantly increasing. The multicast technique, that delivers the same content to several destinations, is constantly being developed. This technique delivers a content from a source to all destinations through the multicast tree. The multicast tree with low cost increases the utilization of network resources. However, the finding of the optimal multicast tree that has the minimum link costs is very difficult and its calculation complexity is the same as the complexity of the Steiner tree calculation which is NP-complete. Therefore, we need an effective way to obtain a multicast tree with low cost and less calculation time on SDN-based smart network platforms. In this paper, we propose a new multicast tree generation algorithm which produces a multicast tree using an agent trained by model-based meta reinforcement learning. Experiments verified that the proposed algorithm generated multicast trees in less time compared with existing approximation algorithms. It produced multicast trees with low cost in a dynamic network environment compared with the previous DQN-based algorithm.

• Journal of the Korea Furniture Society
• /
• v.22 no.4
• /
• pp.270-277
• /
• 2011

This study aims to find new solutions to the problem of utilization of materials and techniques represented in the development of modern lighting design. LED is an important component in modern lighting design and pine tree is one of the most popular domestic wood in furniture design in Korea. In this study, design is developed into various types of furniture such as a table, a chest, and a lighting, by researching manufacturing process and examining the use of slicing pine tree. The technique of slicing pine tree is a simple linear arrangement that was traditionally used in wooden furniture in Lee dynasty, with an emphasis on repetitive rhythm. The slicing technology is used to expand the usage of domestic pine tree. The beauty of natural wood is expressed with the transmission of light by applying this technique to the lighting design. It also brings new communication in between artificial lighting and natural wood combining this traditional technique and LED lighting in design. Finally, this study suggests particular value through the convergence of analog and digital by using the traditional wooden technique that keeps natural wood prints and new digital technology by using LED lighting. More discussions and research about this subject are expected continuously through this study.

• Proceedings of the IEEK Conference
• /
• 2002.07a
• /
• pp.184-187
• /
• 2002

Two-dimensional (2-D) X-ray computerized tomography (CT) equipments are widely used in industrial and medical fields, and nowadays studies on reconstruction algorithm for 3-D cone-beam acquisition systems are active for better utilization. The authors recent-By have proposed a fast reconstruction aigorithm using tree-structured filter bank for 2-D C1, and shown the algorithm is applicable to an approximate reconstruction of 3-D CT. For exact 3-D CT reconstruction, however, we have to backproject 1-D signal into 3-D space. This paper proposes a fast implementation method for this back-projection by use of tree-structured filter bank. and shows the proposed method works approximately 700 times faster than the direct one with almost same reconstruction image quality.

• ETRI Journal
• /
• v.28 no.4
• /
• pp.517-520
• /
• 2006

In this letter, a new sharing mechanism, SRLG sharing, is proposed, which allows the links of the same shared risk link group (SRLG) in a primary light tree to share protections in WDM optical networks. In previous studies, how to share spare resources with SRLG constraints has not been studied in multicast optical networks. In this letter, considering SRLG sharing, we propose a novel algorithm -multicast with SRLG sharing (MSS)- to establish a protection light tree. Finally, the algorithm MSS and the algorithm multicast with no SRLG sharing (MNSS) are compared through a simulation to show that our new sharing scheme of SRLG sharing is more efficient than that of no SRLG sharing in terms of spare resource utilization and blocking probability.

• Proceedings of the National Institute of Ecology of the Republic of Korea
• /
• v.1 no.1
• /
• pp.31-40
• /
• 2020

The rapid development of technologies in unmanned aerial vehicles (UAVs) has led to their use in various areas. UAVs are mainly used for commercial purposes, but their utilization is increasingly important in other areas because their operation cost is less than satellites and aerial imaging. The utilization of UAVs in the environment/ecology area is relatively new. Therefore, identifying the trends of UAV-related spatial information is significant in basic research for UAV utilization. This study quantitatively identified domestic and international research trends related to UAV utilization and analyzed research areas. An attempt was also made to identify upcoming UAV-related topics in the environment/ecology research field using text mining to analyze the bibliographic information of global research literature. Domestic UAV-related studies were classified into seven clusters where basic research on "UAV technology/industry trends" was abundant, and studies on data collection and analysis through UAV remote sensing technology have increased since 2015. Eight clusters were identified for international studies where the most active research area international was "remote sensing technology/data analysis". In addition, Canopy, Classification, Forest, Leaf Area Index, Normalized Difference Vegetation Index, Temperature, Tree, and Atmosphere appeared as the main keywords related to environment and ecology. The appearance frequencies and association strengths were high because the advancement in UAV optical sensor technology and the rapid development of image processing technology enabled the acquisition of data that could not be obtained from existing spatial information. They are recognized as future research topics as related domestic studies have begun corresponding to international research.

• Journal of the Korean Wood Science and Technology
• /
• v.38 no.1
• /
• pp.66-74
• /
• 2010

This study was carried out to investigate the optimum condition for sap exudation of Acer mono Max. tree in a site of Mt. Baekun, Kwangyang city, Korea. Amount of sap exudation, air temperature, relative air humidity and tree diameter at breast height (DBH) were monitored for the period of January 5 through March 28, 2008, and correlation analysis of several factors affecting on sap exudation was carried out. As the diameter of Acer mono at breast height increased, the amount of sap was linearly proportional. Sap exudation initiated at February 18, and occurred intensively in the period of February 28 through March 10, resulting in 84% of total sap amount by volume. During sap exudation, the minimum temperature was averaged at $-2.4{\pm}1.5^{\circ}C$ and the maximum at $6.0{\pm}1.8^{\circ}C$, while there was no sap exudation whenever temperature was below or above $0^{\circ}C$ all the day long. The maximum temperature, range of temperature and the maximum, minimum and mean humidities in air were significant factors affecting on amount of sap. The maximum air temperature had the highest correlation coefficient with 0.768 (P < 0.01) and was also considered as the principal factor by partial-correlation analysis. These results showed that sap exudation required daily air-temperature fluctuation from below to above $0^{\circ}C$, and the amount of sap was strongly dependent on the highest daily-temperature and DBH of tree.

• Industrial Engineering and Management Systems
• /
• v.15 no.1
• /
• pp.110-121
• /
• 2016

With the growing interest in skincare and maintenance, there are increasing numbers of studies on the classification of skin type and the factors influencing each type. This study presents a novel methodology by using data mining, for the determination of the relationships between skin type, lifestyle, and patterns of cosmetic utilization. Eight skin-specific factors, which are moisture, sebum in U-zone (both cheeks), sebum in T-zone (forehead, nose, and chin), pore, melanin, wrinkle, acne, hemoglobin, were measured in 1,246 subjects living in South Korea, in conjunction with a questionnaire survey analyzing their lifestyles and pattern of cosmetic utilization. Using various multivariate statistical methods and data mining techniques, we classified the skin types based on the skin-specific values, determined the relationship between skin type and lifestyle, and accordingly sorted the subjects into clusters. Logistic regression analysis revealed gender-related differences in the skin; therefore, separate analyses were performed for males and females. Using the Gaussian Mixture Modeling (GMM) technique, we classified the subjects based on skin type (two male and four female). Using the ANOVA and decision tree techniques, we attempted to characterize the relationship between each skin type and the lifestyles of the subjects. Menstruation, eating habits, stress, and smoking were identified as the major factors affecting the skin.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.6
• /
• pp.890-896
• /
• 2016

Paulownia tomentosa is one of fast-growing wood species in Korea. In order to evaluate the solid bioenergy properties of Paulownia tree, this study examined the heating value, moisture content (MC), pH and proximate analysis of stem, branch, root, bark and leaf. The heating values of wood parts were slightly higher than those of bark and leaf, and that of branch was the highest among all the samples. The higher moisture content of bark and leaf referred to their lower heating value. Also, the pH of stem, branch and root was similar and lower than those of bark and leaf. The ash content of bark and leaf was much higher than that of wood parts, which is the one of the reasons for effect on the lower heating value and higher pH. While, the volatile matter content (VMC) of bark and leaf was lower than those of wood parts. The bark showed the highest fixed carbon content (FCC), while the FCC of stem was the lowest among all the samples. The obtained results are encouraging that the Paulownia tree could be totally utilized as alternative fuels for bioenergy production.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.1
• /
• pp.85-95
• /
• 2017

This study aimed at more precisely estimating the age of big old trees using dendrochronological method. Gesan-gun in Chungbuk (CBGS), Gurye-gun in Jeonnam (JNGR) and Uljin-gun in Gyeongbuk (GBUJ) were study areas and Zelkova serrata (ZS) and Pinus densiflora (PD) selected as protected trees therein were used as experimental tree species. The increment cores were extracted from 12, 8, and 6 ZSs and 10, 3, and 9 PDs in CBGS, JNGR, and GBUJ, respectively, using an increment borer (${\phi}5.2mm$). In order to clearly distinguish tree-ring boundary, the surface in the transverse section was cut for ZS using a sliding microtome and sanded for PD using a sand paper. Ring widths were measured in the resolution of 0.01 mm. Based on the measurement values, 203-year long (1813-2015) ZS local master tree-ring chronologies were successfully established and 175-year long (1841-2015) ZS local master tree-ring chronology for JNGR was also successfully established. In the case of PD, 154-, 175-, and 250-year long local master tree-ring chronologies for CBGS, JNGR, and GBUJ were successfully established, respectively. In the comparisons between local master tree-ring chronologies, they showed low t-values and Glks. According to the comparisons of the local master tree-ring chronologies with 50-year (1950~2000) average temperature and precipitation distribution maps, the annual variations of local master tree-ring chronologies seem to be determined by not temperature but precipitation. For such cross-dating therefore more local master tree-ring chronologies have to be established at the least based on the distribution map for precipitation.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.6
• /
• pp.659-665
• /
• 2014

Wood properties are affected by environmental factors such as soil and climate change. There were close relationships between mechanical properties and stand characteristics for Quercus serrata stands in Gyeongsangnam-do Province, Jeollanam-do Province and Je-ju island. Both compression and shear strengths of woods showed a negative correlation with diameter at breast height (DBH) and the number of tree per hector, while they are positively related with with tree age, altitude, and drainage. The annual ring width was also negatively correlated with tree age, altitude, drainage, DBH, and tree height. However, anatomical characteristics of wood did not show much variation depending on the provincial regions. These results brought a conclusion that Quercus serrata in southern region could be useful forest resources for the utilization of wood.