• Restorative Dentistry and Endodontics
• /
• v.32 no.2
• /
• pp.102-110
• /
• 2007

The purpose of this study was to obtain the basic information for the improvement of dental environment by investigating the presence of methicillin- or vancomycin-resistant Staphylococcus aureus (MRSA or VRSA) isolated from dental health care workers (DHCWs) and environment of the Chosun University Dental Hospital (CUDH) and a private dental clinic (control group). Staphylococcus aureus (S. aureus) was isolated from anterior nares of 42 DHCWS and 38 sites, unit chairss, x-ray devices, computers, etc., at 10 departments of the CUDH and 20 DHCWs and 11 sites at the private dental clinic. S. aureus was isolated on mannitol salt agar plate and confirmed by PCR with S. aureus species-specific primer. Antimicrobial susceptibility test of clinical isolates of S. aureus against several antibiotics including methicillin (oxacillin) was performed by investigating minimum inhibitory concentration (MIC) using broth microdilution assay. In addition, PCR was performed to detect the methicillin- or vancomycin-resistant gene. The data showed that one strain of S. aureus was isolated from DHCWs of the CUDH and three strains of S. aureus was isolated from 3 samples of the private dental clinic, respectively. All of the isolates from the CUDH and the private dental clinic had resistance to penicillin G, amoxicillin and vancomycin and susceptibility to oxacillin and ciprofloxacin. The S. aureus strains were already obtained the resistance to penicillin G and amoxicillin. These results suggest that two dental clinics were under relatively safe environment.

• Journal of Distribution Science
• /
• v.10 no.4
• /
• pp.37-45
• /
• 2012

The popularity of courier services in Korea has made it an essential part of the country's domestic logistics industry, bolstering the growth not only of the national economy, but also the quality of people's daily lives. An effective strategy for courier companies in Korea would be to provide high-quality services to their existing target markets with the goal of maximizing customer loyalty. This study investigates structural relationships between customer loyalty and service quality as a set of factors and between customer trust and customer satisfaction. These antecedent relationships will be used to understand the "performance formation model" through service quality. In this study, service quality, as a set of factors, is considered to be the independent variable, while customer satisfaction and customer trust are both treated as intervening variables. Finally, customer loyalty is the dependent variable. Following a review of the literature, this paper's proffered hypothesis will be investigated in terms of whether the independent and intervening variables significantly affect customer loyalty. A statistical analysis of the empirical research was carried out using both SPSS 18.0 and AMOS 18.0 The results of this study's empirical analysis show three conclusions. First, among the intervening variables (customer satisfaction and customer trust), customer satisfaction is significantly correlated with customer loyalty. Customer trust, however, was shown to have little or no relationship to customer loyalty. Second, the quality of service variable seems to influence customer satisfaction, customer trust, and customer loyalty. Third, with respect to the relationship of intervening variables, customer trust affects customer satisfaction. Thus, the companies that have a competitive advantage in Korea have successfully maximized customer loyalty for their existing customers. Courier companies will need to research and study customer needs. Therefore, this research suggests that effective courier service management can be better understood through the application of the service quality performance formation model, which can enhance the quality of service provided by domestic courier services. This research is limited to investigating qualitative variables, such as the service quality factors, customer satisfaction, and customer trust. It would be helpful for future research on courier services to consider quantitative variables, such as price and weight.

• Journal of East-West Nursing Research
• /
• v.8 no.1
• /
• pp.81-88
• /
• 2003

This research has been conducted to examine the cognition and attitude of nursing students on Oriental Nursing, the subject of this research being 789 nursing students from 9 different universities who took the Oriental Nursing class. A questionnaire, the construct validity and reliability of which have been verified through enquiries into records and references as well as preliminary researches, was used as a research tool. The questionnaire, a set of 86 questions, was developed by the researchers of this study, and the reliability of the questionnaire is Cronbach's=.85. The collected data have been analysed using SPSS windows programme 11.0 for t-test and ANOVA, and the results are as follows: 1. There was a significant difference in cognition and attitude points according to the academic year (F=14.15, p=.000). After the post-hoc test, it was revealed that the points of the students in their 4th year were significantly higher than the points of the students in their 2nd or 3rd year. 2. There was a significant difference in cognition and attitude points according to the credits the students have taken (F=28.66, p=.000). After the post-hoc test, it was revealed that the points of the students who have taken from $3{\sim}5$ to $6{\sim}8$ credits were significantly higher than the points of those who have taken from 1 to 2 credits. 3. There was a significant difference in cognition and attitude points according to the period of time the students have experienced Oriental Nursing (F=32.06, p=.000). After the post-hoc test, it was revealed that the points of the students who have practised Oriental Nursing from 1 to 2 weeks were significantly higher than the points of those who have not practised it at all. 4. There was no significant difference in cognition and attitude points according to the treatment or hospitalisation of the students themselves or their family members. 5. The cognition and attitude points of the students who are deeply interested in Oriental Nursing were significantly higher than the points of those who are not (t=8.83, p=.000). 6. The cognition and attitude points of the students who have higher expectations for the development of Oriental Nursing were significantly higher than the points of those who have not(t=5.90, p=.000). 7. The cognition and attitude points of the students who believe that the Oriental Nursing will contribute to the expansion of the roles of nurses were significantly higher than the points of those who do not (t=6.60, p=.000). 8. The cognition and attitude points of the students who expect that the Oriental Nursing will be effective in prevention of chronic diseases were significantly higher than the points of those who do not (t=5.80, p=.000). According to the results above, it was confirmed that proper education on Oriental Nursing can have affirmative effects on the cognition and attitude of the nursing students towards Oriental Nursing.

• Journal of the Korean Magnetics Society
• /
• v.19 no.3
• /
• pp.89-93
• /
• 2009

Amorphous $Ge_{1-x}Mn_x$ semiconductor thin films grown by low temperature vapor deposition were annealed, and their electrical and magnetic properties have been studied. The amorphous thin films were $1,000{\sim}5,000\;{\AA}$ thick. Amorphous $Ge_{1-x}Mn_x$ thin films were annealed at $300^{\circ}C$, $400^{\circ}C$, $500^{\circ}C$, $600^{\circ}C$ and $700^{\circ}C$ for 3 minutes in high vacuum chamber. X-ray diffraction analysis reveals that as-grown $Ge_{1-x}Mn_x$ semiconductor thin films are amorphous and are crystallized by annealing. Crystallization temperature of amorphous $Ge_{1-x}Mn_x$ semiconductor thin films varies with Mn concentration. Amorphous $Ge_{1-x}Mn_x$ thin films have p-type carriers and the carrier type is not changed during annealing, but the electrical resistivity increases with annealing temperature. Magnetization characteristics show that the as-grown amorphous $Ge_{1-x}Mn_x$ thin films are ferromagnetic and the Curie temperatures are around 130 K. Curie temperature and saturation magnetization of annealed $Ge_{1-x}Mn_x$ thin films increase with annealing temperature. Magnetization behavior and X-ray analysis implies that formation of ferromagnetic $Ge_3Mn_5$ phase causes the change of magnetic and electrical properties of annealed $Ge_{1-x}Mn_x$ thin films.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.43 no.4
• /
• pp.349-355
• /
• 2017

Skin tone plays a key role in one of the determinant for facial attractiveness. Most female customers have an interest in choosing skin color and improving their skin tone and their needs have been contributed the expansion of cosmetic products in the market. Recently, cosmetic customers, who want bright skin, are also interested in healthy and lively-looking skin. However, there is no method to evaluate the skin tone with the complexion-describing adjectives (CDAs). Therefore, this study was conducted to find the ways to objectify and digitize the CDA. We obtained that quasi $L^*$ at dark skin is 65 and quasi $L^*$ at bright skin is 74 for standard images, which are selected from our data base. To match the following seven CDAs: pale, clear, radiant, lively, healthy, rosy and dull, the colors of both images were adjusted by 30 panels. The quasi $L^*$, $a^*$ and $b^*$ were converted from the RGB values of the manipulated images. The differences between the quasi $L^*$, $a^*$ and $b^*$ values of standard images and manipulated images reflecting each CDA were statistically significant (p < 0.05). However, there were no statistical significances between the $L^*$ values of dark and bright skin images that were modified in accordance with each CDA and there also were no statistical significances between the quasi $a^*$ values of dark and bright skin for pale and clear CDAs. From the statistical analysis, the CDAs were observed to form three groups: (i) pale-clear-radiant, (ii) lively-healthy-rosy and (iii) dull. We recognized that people have a similar opinion about perception of CDAs. Following our results of this study, we establish new standard method for sensibility evaluation which is difficult to carry out scientifically or objectively.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.9
• /
• pp.590-596
• /
• 2012

Enhanced coagulation is best available technologies to treat NOM in water to produce clean drinking water. In this research, the comparison experiments between conventional coagulation (CC) and enhanced coagulation (EC) using 4 type coagulants i.e., ferric chloride, aluminium sulphate (alum), poly aluminium sulphate organic magnesium (PSOM) and poly aluminium chloride (PACl) were performed in terms of surrogate parameters such as dissolved organic carbon (DOC), trihalomethane formation potential (THMFP), haloacetic acid formation potential (HAAFP) and zeta potential variation in order to find out the most effective coagulant and conditions to fit Nakdong River water. When applied to EC process, the turbidity removal efficiency did not increased gradually compared to the CC process when adding coagulants. Furthermore, the removal efficiency of turbidity became decreased much more as coagulants were added increasingly whereas the removal efficiency of DOC, THMFP and HAAFP became increased by 13~18%, 9~18% and 9~18% respectively compared to the CC process. The characteristics of turbidity removal showed relatively high removal efficiency considering the pH variation in entire pH range when using $FeCl_3$ and PACl. Additionally, in case of alum and PSOM steady removal efficiency was shown between pH 5 and pH 8. In terms of DOC surrogate the coagulants including 4 type coagulants indicated high removal efficiency between pH 5 and pH 7. The removal efficiency of dissolved organic matter (DOM) in EC between less than 1 kDa and more than 10 kDa augmented by 11~21% and 16% respectively compared to the CC process. The removal efficiency of hydrophobic and hydrophilic organic matter proved to be increased by 27~38% and 11~15% respectively. In conclusion, the most effective coagulant relating to EC for Nakdong River water was proved to be $FeCl_3$ followed by PSOM, PAC and alum in order.

• Asian Journal of Turfgrass Science
• /
• v.20 no.2
• /
• pp.147-156
• /
• 2006

This study was initiated to evaluate the growth characteristics of seven creeping bentgrass cultivars in summer, 'Penncross' showed the worst visual quality, whereas 'Penn A-4' and 'Crenshaw' the best quality. 'Putter', which was maintained a fair quality during the test period, was regarded as a good cultivar because of no significant variation in summer as compared to the other caltivars. 'Crenshaw',' L-93' and 'Penn A-4' were greater in chlorophyll content and 'Penncross' lowest during the summer. Also, 'SR1020' had a low content of chlorophyll. 'Putter' greatly increased in chlorophyll content after fertilization. The highest shoot density($19.3/cm^2$) was found with 'L-93' in early August, followed by 'Crenshaw', 'Penn A-4', 'Putter', 'Dominant', and 'SR1020' in that order. However, 'Penncross' was lowest($15.7/cm^2$). As for a root length, 'L-93' was longest, being over an average 5.5cm. 'Penn A-4' and 'Putter' also showed good result in root growth. However, the root length considerably decreased with 'SR1020', 'Penncross' and 'Dominant' in summer. Brown patch was a serious disease for the most cultivars, except 'Penncross'. 'Dominant' had the most serious damage. 'Putter', 'L-93', 'Crenshaw', 'SR1020', and 'Penn A-4' were also greater in damage over the others. In regards of algae occurrence in summer, 'Penn A-4' had the least damage, while 'Dominant' the greatest. In conclusion, 'Crenshaw', 'Penn A-4' and 'L-93' were the best cultivars in terms of summer growth. Conversely, 'Penncross' was the poorest one. However, this study was conducted under the conditions of one-year old green. Accordingly, in-depth experiment should be done over several years to elucidate the characteristics of growth for the wide range of creeping bentgrass cultivars during the summer.

• Cross-Cultural Studies
• /
• v.52
• /
• pp.277-312
• /
• 2018

First-order cybernetics during the 1940s and 1950s aimed for control of an observed system, while second-order cybernetics during the mid-1970s aspired to address the mechanism of an observing system. The former pursues an objective, subjectless, approach to a system, whereas the latter prefers a subjective, personal approach to a system. Second-order observation must be noted since a human observer is a living system that has its unique cognition. Maturana and Varela place the autopoiesis of this biological system at the core of second-order cybernetics. They contend that an autpoietic system maintains, transforms and produces itself. Technoscientific recreation of biological autopoiesis opens up to a new step in cybernetics: what I describe as third-order cybernetics. The formation of technoscientific autopoiesis overlaps with the Fourth Industrial Revolution or what Erik Brynjolfsson and Andrew McAfee call the Second Machine Age. It leads to a radical shift from human centrism to posthumanity whereby humanity is mechanized, and machinery is biologized. In two versions of the novel Demon Seed, American novelist Dean Koontz explores the significance of technoscientific autopoiesis. The 1973 version dramatizes two kinds of observers: the technophobic human observer and the technology-friendly machine observer Proteus. As the story concludes, the former dominates the latter with the result that an anthropocentric position still works. The 1997 version, however, reveals the victory of the techno-friendly narrator Proteus over the anthropocentric narrator. Losing his narrational position, the technophobic human narrator of the story disappears. In the 1997 version, Proteus becomes the subject of desire in luring divorcee Susan. He longs to flaunt his male egomaniac. His achievement of male identity is a sign of technological autopoiesis characteristic of third-order cybernetics. To display self-producing capabilities integral to the autonomy of machinery, Koontz's novel demonstrates that Proteus manipulates Susan's egg to produce a human-machine mixture. Koontz's demon child, problematically enough, implicates the future of eugenics in an era of technological autopoiesis. Proteus creates a crossbreed of humanity and machinery to engineer a perfect body and mind. He fixes incurable or intractable diseases through genetic modifications. Proteus transfers a vast amount of digital information to his offspring's brain, which enables the demon child to achieve state-of-the-art intelligence. His technological editing of human genes and consciousness leads to digital standardization through unanimous spread of the best qualities of humanity. He gathers distinguished human genes and mental status much like collecting luxury brands. Accordingly, Proteus's child-making project ultimately moves towards technologically-controlled eugenics. Pointedly, it disturbs the classical ideal of liberal humanism celebrating a human being as the master of his or her nature.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.16 no.1
• /
• pp.71-85
• /
• 2021

Representative domestic start-up support organizations include the Business Incubator(BI), Korea Institute of Startup & Entrepreneurship Development(KISED), Techno Park(TP), and Center of Creative Economy Innovation(CCEI), and there are about 260 Business incubator nationwide. The Business incubator is operated by universities, research institutes, and private foundations or associations. The organization consists of the center director and the incubating professionals (hereinafter referred to as "manager"), etc., and performs tasks such as center operation management and incubation support services for tenant companies. Until now, research on the operation of Business Incubator has been mainly focused on the performance of tenant companies. Studies on whether the manager's competency characteristics directly or indirectly affect the performance of the tenant companies through psychological mediators such as self-efficacy and organizational commitment were very scarce. The purpose of this study is to explore various factors influencing organizational commitment and job performance by the competence characteristics of Business incubator managers, and to explain the causal relationship among those factors. In particular, the difference in perception was investigated by a manager's survey that influences organizational commitment and work performance at the Business incubator. Through this, we intend to present practical implications for the role of managers in the operation of Business incubators. This study is an exploratory study, and the subject of the study was a survey of about 600 managers working at Business incubator nationwide, of which 116 responses were analyzed. Data analysis included descriptive statistics, exploratory factor analysis, and reliability. Structural equation model analysis was performed for hypothesis tests. As a result of the analysis, it was found that the cognitive characteristics of the Business incubator manager, communication, and situational response as the behavioral characteristics had a positive effect on the manager's self-efficacy, and the behavioral characteristics had a greater effect on the self-efficacy. It was also found that the manager's cognitive and behavioral characteristics, and self-efficacy had a positive effect on organizational commitment and work performance. In particular, a manager's self-efficacy has a positive effect on organizational commitment and work performance. This result showed that the manager's competency characteristics increase the manager's self-efficacy as a mediating factor rather than directly affecting organizational commitment and work performance. This study explains that the manager's competency characteristics are transferred to organizational commitment and work performance. The results of the study are expected to reflect the job standard of the National Competency Standards (NCS) and basic vocational competency to the job competency of managers, and it also provides a guideline for the effective business incubator operation in terms of human resource management. In practice, it is expected that the results of the study can reflect the vocational basic skills of the Business Incubator manager's job competency in the National Competency Standards(NCS) section, and suggest directions for the operation of the Business Incubator and the manager's education and training.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.51 no.2
• /
• pp.28-41
• /
• 2023

The objective of the study was to develop an Urban Windway Forest Creation Planning Technique for the Improvement of the Urban Environment using the case of Daejeon Metropolitan City. Through a spatial analysis of fine dust and heat waves, a basin zone, in which the concentration was relatively serious, was derived, and an area with the potential of cold air flow was selected as the target area for the windway forest development by analyzing the climate and winds in the relevant zone. Extreme fine dust areas included the areas of the Daejeon Industrial Complex Regeneration Business District in Daedeok-gu and Daedeok Techno Valley in Yuseong-gu. Heat wave areas included the areas of Daedeok industrial Complex in Moksang-dong, the Daejeon Industrial Complex Regeneration Business District in Daehwa-dong, and the high-density residential area in Ojeong-dong. As a result of measuring the wind speeds in Daejeon with an Automatic Weather System, the average wind speeds during the day and night were 0.1 to 1.7 m/s,, respectively. So, a plan of for a windway forest that smoothly induces the movement of cold air formed in outer forests at night is required. The fine dust/heat wave intensive management zones of Daejeon Metropolitan City were Daejeoncheon, Yudeungcheon, Gapcheon-Yudeungcheon, and Gapcheon. The windway forest formation plan case involved the old city center of Daejeon Metropolitan City among the four zones, the Gapcheon-Yudeungcheon area, in which the windway formation effect was presumed to be high. The Gapcheon-Yudeungcheon area is a downtown area that benefits from the cold and fresh air generated on Mt. Gyejok and Mt. Wuseong, which are outer forests. Accordingly, the windway forest was planned to spread the cold air to the city center by connecting the cold air generated in the Seosa-myeon forest of Mt. Gyejok and the Namsa-myeon forest of Mt. Wuseong through Gapcheon, Yudeungcheon, and street forests. After selecting the target area for the wind ventilation forest, a climate map and wind formation function evaluation map were prepared for the area, the status of variation wind profiles (night), the status of fine dust generation, and the surface temperature distribution status were grasped in detail. The wind ventilation forest planning concept and detailed target sites by type were identified through this. In addition, a detailed action plan was established according to the direction of creation and setting of the direction of creation for each type of wind ventilation forest.