• Journal of Agricultural Extension & Community Development
• /
• v.21 no.1
• /
• pp.245-272
• /
• 2014

This study aims to explore the present and future of agricultural extension system in Uganda. Though Uganda has used many approaches in its agricultural extension, very little has been registered in farm productivity and profitability. Too many reforms some of them some are top-down while others are bottom - up. In most cases these reforms may not be given a chance to develop to show their impact. Future success of agricultural extension and rural development efforts in Uganda will depend not only on the presence of technical expertise and availability of resources but also on each government's willingness to redefine the role of its institutions and to allow the active participation of rural people in formulating and implementing and agricultural extension and rural development programs. As result the public extension systems in Uganda needs to be demand-driven so to make it relevant and important to the beneficiary.

• Journal of architectural history
• /
• v.13 no.4 s.40
• /
• pp.89-105
• /
• 2004

This paper investigates morphological theory as an intellectual framework for research and design. The first part of the paper will review morphological studies in the fields of urban geography, urban planning and architecture, particularly in England from the 1940s to the 1980s. While urban geographers and planners were concerned primarily with town plans, building forms and land use, architectural theoreticians were more interested in the topological relationship between urban and architectural space. The underlying premises and principles of these two approaches will be reviewed. The second part of the paper will focus on typology in Europe and North America. The reinterpretation of typology by Italian architects helped to bridge the gap between individual elements of architecture and the overall form of the city. However, typological theory became less accessible in post-war England and the United States. After 1980, the debate on typology became muted by the onset of vague notions such as functionalism, bio-technical determinism, and contextualism. This paper will propose a redefinition of morphology as a heuristic device, in contrast with the dichotomic view of urban morphology and architectural typology. Morphology will be shown to combine the geometrical and topological; the intentional and accidental; the real and abstract; and a priori and a posteriori. The last part of the paper discusses the lack of comparative theories and methods surrounding the physical form of architecture and the city by Korea commentators. Empirically rooted facility planning, non-comparative historical studies, and iconographic criticism emerged as a central preoccupation of architectural culture between the 1960s and 1980s, a time when international debate on architecture and urbanism was most intense. This paper will give consideration to the built environment as a dynamic physical entity and space as an epiphenomenon of daily urban life, such that collaboration between urban designers, architects, and landscape architects is seen as both beneficial and necessary.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.3 no.4
• /
• pp.1-10
• /
• 2000

Satellite remote sensing images have much more information compared to a paper map. But these images are generally handled as particular image format gained from optical sensor, and must be processed and analyzed by computer with high priced digital image processing system. For the extraction of digital elevation model(DEM) from satellite image, we used the overlay image by SPOT-3 of Chuncheon area at the Kangwon province. According to the image condition, the precious geometric correction, the bundle adjustment for ortho-image generation and the stereo image mapping by several technical approaches were processed. So that we developed the methods of automatic DEM extraction and efficient stereo image map generation which can improve the digital image processing steps. Also, we applied the multiple direction birdeye view image for modeling and analysis using the remotely sensed overlay images with high resolution.

• Earthquakes and Structures
• /
• v.9 no.3
• /
• pp.481-501
• /
• 2015

Current design codes and technical recommendations often provide rough indications on how to assess effective stiffness of Reinforced Concrete (R/C) frames subjected to seismic loads, which is a key factor when a linear analysis is performed. The Italian design code (NTC-2008), Eurocode 8 and ACI 318 do not take into account all the structural parameters affecting the effective stiffness and this may not be on the safe side when second-order $P-{\Delta}$ effects may occur. This paper presents a study on the factors influencing the effective stiffness of R/C beams, columns and walls under seismic forces. Five different approaches are adopted and analyzed in order to evaluate the effective stiffness of R/C members, in accordance with the scientific literature and the international design codes. Furthermore, the paper discusses the outcomes of a parametric analysis performed on an actual R/C building and analyses the main variables, namely reinforcement ratio, axial load ratio, concrete compressive strength, and type of shallow beams. The second-order effects are investigated and the resulting displacements related to the Damage Limit State (DLS) under seismic loads are discussed. Although the effective stiffness increases with steel ratio, the analytical results show that the limit of 50% of the initial stiffness turns out to be the upper bound for small values of axial-load ratio, rather than a lower bound as indicated by both Italian NTC-2008 and EC8. As a result, in some cases the current Italian and European provisions tend to underestimate second-order $P-{\Delta}$ effects, when the DLS is investigated under seismic loading.

• Structural Engineering and Mechanics
• /
• v.66 no.1
• /
• pp.45-59
• /
• 2018

The bi-material elastic system consisting of the pre-stressed hollow cylinder and pre-stresses surrounding infinite elastic medium is considered and it is assumed that the mentioned initial stresses in this system are caused with the compressing or stretching uniformly distributed normal forces acting at infinity in the direction which is parallel to the cylinder's axis. Moreover, it is assumed that on the internal surface of the cylinder the ring load which moves with constant velocity acts and within these frameworks it is required to determine the influence of the aforementioned initial stresses on the critical velocity of the moving load. The corresponding investigations are carried out within the framework of the so-called three-dimensional linearized theory of elastic waves in initially stresses bodies and the axisymmetric stress-strain state case is considered. The "moving coordinate system" method is used and the Fourier transform is employed for solution to the formulated mathematical problem and Fourier transformation of the sought values are determined analytically. However, the originals of those are determined numerically with the use of the Sommerfeld contour method. The critical velocity is determined from the criterion, according to which, the magnitudes of the absolute values of the stresses and displacements caused with the moving load approaches an infinity. Numerical results on the influence of the initial stresses on the critical velocity and interface normal and shear stresses are presented and discussed. In particular, it is established that the initial stretching (compressing) of the constituents of the system under consideration causes a decrease (an increase) in the values of the critical velocity.

• Steel and Composite Structures
• /
• v.33 no.5
• /
• pp.717-727
• /
• 2019

This paper is motivated by the lack of studies in the technical literature concerning to vibration analysis of a single-layered graphene sheet (SLGS) with corner cutout based on the nonlocal elasticity model framework of classical Kirchhoff thin plate. An isogeometric analysis (IGA) based upon non-uniform rational B-spline (NURBS) is employed for approximation of the L-shape SLGS deflection field. Trimming technique is employed to create the cutout in geometry of L-shape plate. The L-shape plate is assumed to be Free (F) in the straight edges of cutout while any arbitrary boundary conditions are applied to the other four straight edges including Simply supported (S), Clamped (C) and Free (F). The Numerical studies are carried out to express the influences of the nonlocal parameter, cutout dimensions, boundary conditions and mode numbers on the variations of the natural frequencies of SLGS. It is precisely shown that these parameters have considerable effects on the free vibration behavior of the system. In addition, numerical results are validated and compared with those achieved using other analysis, where an excellent agreement is found. The effectiveness and the accuracy of the present IGA approach have been demonstrated and it is shown that the IGA is efficient, robust and accurate in terms of nanoplate problems. This study serves as a benchmark for assessing the validity of numerical methods used to analyze the single-layered graphene sheet with corner cutout.

• Journal of the Society of Naval Architects of Korea
• /
• v.45 no.6
• /
• pp.710-718
• /
• 2008

This paper presents a simple and fast approach to plan the arrangement of supports and to do a ship docking analysis. The unpredicted structural damages often happen from a docking works as the size of ships are getting larger and larger. In docking a ship, excessive reaction forces from supports are primary causes of the structural damage. The grillage analysis method is employed to simply calculate only the reaction forces at supports. The grillage modeling strategies are proposed to improve the accuracy. In this paper, the results obtained by the proposed approach are compared with those of the current whole-ship FEA for typical types of ships. Comparison shows that the results from the present grillage approaches are reasonably in a good agreement with the 3-D full F.E one. Finally, an integrated program developed for the ship docking analysis is described.

• Management & Information Systems Review
• /
• v.32 no.1
• /
• pp.87-109
• /
• 2013

This study analyzed technical efficiencies of health service industry of OECD countries with DEA and SFA approaches using 10 year data from OECD Health Database. The results can be summarized as follows: First, Korea was found the best practice among 15 OECD countries based on CRS nondirectional SBM models. Second, it was found that some inefficiencies were due to environmental factors. Third, we found that environmental factors were important factors in efficiencies of health service industry by observing that there were large efficiency changes after adjusting slacks due to environmental factors. From the above, Korea led the OECD countries in health service industry and was the most competent. But this study has some limitation since the quality and cost of health care was not taken into account.

• Polymer(Korea)
• /
• v.33 no.4
• /
• pp.273-283
• /
• 2009

Recent research issues on the scratch behaviors of polymeric materials has been investigated. In this study, the scratch characterization of polymeric materials with respect of experimental parameters, such as nature of the material, temperature, applied load, test speed, surface treatment, scratch number of times, polymer structure/functional groups, degree of cross-linking, and crystallinity, are reviewed. In addition, the testing standards and methodologies which could quantify the scratch behaviors are introduced and the current international standards are compared and summarized. The latest technical approaches for evaluating the scratch behaviors and improving the scratch resistance of polymers are also discussed.

• Journal of Wetlands Research
• /
• v.21 no.4
• /
• pp.267-280
• /
• 2019

Adaptive Management (AM) is one of the best available approaches for managing natural resources in the presence of uncertainty. In spite of the limitations, AM has been widely applied in nature resource management policies and plans internationally, while application of AM in nature resource management in Korea is limitedly used. Accordingly, this study reviews application of AM in nature resource management research in Korea with respect to its definitions, procedures, impediments and considerations. The present study also reviews recent ecological modelling studies which is an essential component of AM approach. Finally, management of artificial sea forest, coastal wetlands and fisheries are suggested as the recommended fields to adopt AM.