• Electrical & Electronic Materials
• /
• v.13 no.12
• /
• pp.6-9
• /
• 2000

Over the years of decades, the memory technology has progressed a long, marble way. As we have evidenced from the Intel's 1Kb DRAM in 1970 to the Gigabit era of 2000's, the road further ahead towards the Terabit era will be unfolded. The technology once perceived inconceivable is in realization today, and similarly roadblocks as we know of today mayvecome trivial issues for tomorrow. For the inquiring mind, the question is how the "puzzle"of tomorrow's memory technology is pieced-in today. The process will take place both in evolutionary and revolutionary ways. Among these, note-worthy are the changes in DRAM architecture and the cell process technology. In this paper, some technical approaches will be discussed to bring these aspects into a general overview and a per-spective with possibilities for the new memory technology will be presented.presented.

• Structural Engineering and Mechanics
• /
• v.3 no.5
• /
• pp.475-495
• /
• 1995

In the past, physical models have been proposed, in compliance with the concept of the compressive-force path, for the realistic design of various statically determinate structural concrete members. The present work extends these models so as to encompass indeterminate RC structural forms. Pilot tests conducted on continuous beams and fixed-ended portal frames have revealed that designing such members to present-day concepts may lead to brittle types of failure. On the other hand, similar members designed on the basis of the proposed physical models attained very ductile failures. It appears that, unlike current design approaches, the compressive-force path concept is capable of identifying those areas where failure is most likely to be triggered, and ensures better load redistribution, thus improving ductility. The beneficial effect of proper detailing at the point of contraflexure in an indeterminate RC member is to be noted.

• Structural Engineering and Mechanics
• /
• v.37 no.2
• /
• pp.177-196
• /
• 2011

An economic, structurally effective and practically applicable strengthening technique was developed for reinforced concrete (RC) framed buildings. The idea of the technique is to convert the existing hollow brick infill wall into a load carrying system acting as a cast-in-place RC infill wall by bonding relatively thin high strength precast concrete PC panels to the plastered hollow brick infill. For this purpose, a total of eight one-third scale, one bay, one story frames were tested under reversed-cyclic lateral loads. Test frames were designed and constructed with common deficiencies observed in practice. Four different panel types were used for strengthening. Test results showed that both strength and stiffness of the frames were significantly improved by the introduction of PC panels. Experimental results were compared with the analytical approaches suggested by the authors.

• Geomechanics and Engineering
• /
• v.9 no.2
• /
• pp.169-193
• /
• 2015

This paper is the second part of the study for determining the seismic behavior of soil systems. The aim of this part is to present solution approaches for determining seismic site amplification. For this purpose, two solution techniques are used. The first technique is equivalent linear analysis which is mostly used in literature. The other technique is real time parameter updating approach and this approach uses the possibilities of Simulink effectively. A graphical user interfaced (GUI) program called DTASSA standing for Discrete-Time Analysis of Seismic Site Amplification is developed. In DTASSA, automatic block diagram producing system is developed and seismic site amplification for multiple soil layers may easily be investigated in real time. Numerical applications have been carried out to check the reliability of developed algorithm. The results of DTASSA are compared with SUA, EERA and NERA programs for the particular example problems.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.2230-2235
• /
• 2008

As a consequence of the standardization process developing in Europe, on April 2005 the new European standard EN 13749 was issued by the European standardization body CEN. The norm EN 13749 standardizes and develops the requirements already present in UIC leaflets for test verifications and define all technical requirements for the acceptance process in order to achieve a complete satisfactory design of the bogie. The aim of the norm is to define the complete design process of new railway bogies. It includes design procedures, assessment methods, verification and manufacturing quality requirements. In this study, fatigue analysis of the bogie frame is investigated comparing different approaches between conventional methodology and simulation results based on the VPD(Virtual Product Development).

• Journal of the Korean Solar Energy Society
• /
• v.28 no.6
• /
• pp.15-23
• /
• 2008

The article deals with system technology of a new solar heating system which systematically combines exiting solar collector technology, auxiliary electrical water heating, floor heating system and well insulated construction method and its application of this system to apartment house heating system in the cold region, and also analyzed performance of the new system in terms of technical and economic feasibility. Results shows that energy efficiency approaches up to 50% of the energy consumption of local construction from 1980 to 1981. The implementation of "DQ technology" to floor heating system achieved from 79% to 85% of the energy-saving benefits comparing to other housing units which were supplied by the local district heating plant.

• Elastomers and Composites
• /
• v.23 no.4
• /
• pp.299-307
• /
• 1988

The mono-, di- and polysulfidic concentrations of the carbon black filled NR and SBR vucanizates which have different cure systems were determined. The n-decane was used as a swelling solvent. The propane-2-thiol and hexane thiol were used as specific chemical probes to cleavage the chemical crosslinks such as di- and polysulfide. In order to understand the effect of crosslink structure on the physical properties of vulcanizates, the tensile properties, fatigue failure, heat build up, compression set and viscoelastic properties were measured. From the results, the significant relationships between crosslink sturctures and physical properties, especially a gins resistance were obtained. Therefore, the better performances of the product can be satisfied by using the interpretations and approaches in this study.

• Proceedings of the IEEK Conference
• /
• 2002.06d
• /
• pp.335-338
• /
• 2002

This paper proposes some technical approaches for automatic detection of pulmonary nodules in chest X-ray images. We applied threshold technique for the lung field segmentation and extended the lung field by using morphological methods. A template matching technique was employed for automatic detecting nodules in lung area. Genetic algorithm(GA) was used in template matching(TM) to select a matched image from various reference patterns(simulated typical nodules). We eliminated the false-positive candidates by using histograms and contrasts. We used standard databases published by Japanese Society of Radiological Technology (JSRT) for correct results. Also we employ two-dimensional Gaussian distribution for some reference images because the shadow of lung nodules in radiogram generally shows the distributions. Nodules of about 89% were correctly detected by our scheme. The simulation results show that it is an effective method to indicate lesions on chest radiograms.

• Journal of Information Technology Applications and Management
• /
• v.20 no.3
• /
• pp.105-127
• /
• 2013

Information and Communication Technology (ICT) has become a vital instrument for delivering a number of services such as education, healthcare and public services. Community wireless networks are community-centric telecommunication infrastructure developed to provide affordable communication for those who live in remote areas. This chapter discusses the role of Nepal Wireless in achieving socio economic development of rural communities by facilitating affordable Internet access. We analyze the challenges Nepal Wireless faced and articulate on the approaches it took to address those challenges such as lack of technical skills, appropriate technology and funding, difficult geographical terrains, unstable political situation, and expensive devices. In addition, we address the success and failure factors of this community-based ICT4D approach in order to guide similar endeavors. We conclude the chapter by some suggestions for policy makers, community developers, and academicians.

• Korean Journal of Occupational Health Nursing
• /
• v.13 no.1
• /
• pp.70-78
• /
• 2004

The increase of health care expenditure for Thai worker calls for the need of workplace health promotion. The purpose of this article is to describe the status of workplace health promotion in Thailand, emphasizing the roles of occupational health nurse. Secondary data analysis and extensive literature reviews were conducted. Results showed that Thailand is committed with implementing health promotion concepts in various settings including workplace. Several public organizations have developed national workplace health projects with different strategies and approaches. Role of occupational health nurses in workplace health promotion has gradually expanded. The new law specifying the functions of occupational health nurse in providing comprehensive health services is in the process. Occupational health nursing standard as related to workplace health promotion has been developed. A research based case study on workplace health promotion program is also presented to elaborate the proactive roles of occupational health nurse. Findings of this study suggest the transitional roles of Thai occupational health nurses in which training and technical supports from related organizations are in need.