• 한국패션뷰티학회지
• /
• 제2권2호
• /
• pp.71-80
• /
• 2004

This study was conducted to propose name and role of a beauty-related specialist, a brand-new profession, recognizing that rapidly evolving culture and industries call for development of a new occupation in beauty business in the 21st century, and to suggest an approach to set up a department to produce such experts. To this end, extensive data and information were collected from relevant companies, education institutions, and all of the eighty two departments at 2-year junior colleges around the country, and were analyzed. The findings of the study are as follows: First, it was acknowledged that a new occupation distinct from existing ones is required in the beauty business. Secondly, the study has defined role of the new job; a professional beauty stylist who is competent to work across beauty, coordination and fashion with long-term perspective. Thirdly, the study suggested name of the brand-new occupation as beauty stylist. The results summarized above have meaningful implications; the study identified weaknesses of the existing beauty-related departments, and suggested practical approaches to improve them in order to provide effective education on the new profession, beauty stylist, and enhance adaptation capability.

• Earthquakes and Structures
• /
• 제18권5호
• /
• pp.555-565
• /
• 2020

The main objective of seismic codes is to prevent structural collapse and ensure life safety. Collapse probability of a structure is usually assessed by making a series of analytical model assumptions. This paper investigates the effect of finite element modeling (FEM) assumptions on the estimated collapse capacity of a reinforced concrete (RC) frame building and points out the modeling limitations. Widely used element formulations and hysteresis models are considered in the analysis. A full-scale, three-story RC frame building was utilized as the experimental model. Alternative finite element models are established by adopting a range of different modeling strategies. Using each model, the collapse capacity of the structure is evaluated via Incremental Dynamic Analysis (IDA). Results indicate that the analytically estimated collapse capacities are significantly sensitive to the utilized modeling approaches. Furthermore, results also show that models that represent stiffness degradation lead to a better correlation between the actual and analytical responses. Results of this study are expected to be useful for in developing proper models for assessing the collapse probability of RC frame structures.

• Ocean and Polar Research
• /
• 제31권1호
• /
• pp.1-9
• /
• 2009

When evaluating acoustic methods for measuring physical parameters in the ocean, economical and technical considerations are paramount. As an indirect method of estimating ocean dynamics, acoustic tomography has advantages over more conventional approaches. It allows the reconstruction of temperature and flow fields from the acoustic impulse time-of-flight measured along the rays propagating from the source to the receiver. However, many problems require complicated and expensive systems. To use the acoustic tomography method to best effect, developing hardware systems with sources and receivers mounted permanently on the sea bottom is crucial. Akulichev et al. presented some experimental results from shallow zones of the World Ocean that served as a motive for developing a multifunction system with acoustic hardware and software. Here we present technical features and the sea test results of the system.

• 펄프종이기술
• /
• 제47권3호
• /
• pp.55-62
• /
• 2015

Paper mulberry fibers have been used as fibrous raw materials for manufacturing traditional handmade paper, hanji for a long time. Compared to wood pulp fibers, pulp fibers from mulberry bast tissue have some benefits in physical and chemical properties due to their high D.P (degree of polymerization), M.W (molecule weight) and long fiber length. Specially, Korean handmade hanji shows outstanding characteristics in mechanical tensile strength, folding endurance, flexibility and long sustainable conservation properties. Therefore, hanji is widely applied to daily supplies, hygienic goods, medical supplies, clothing industries and so on. Recently, the potential demand of mulberry pulp fibers is more and more increased on the strength of high application fields. This study was focused on the possibility of wastewater recycling in unit operation systems for the development of automated mass production line. The properties and environmental loads of wastewater from debarking, cooking, bleaching and screening process were analyzed by means of COD, conductivity, turbidity and solid materials. The wastewater from debarking and cooking process was comparatively high in pollution load, and would be treated by additional approaches of chemico-physical method.

• 복식
• /
• 제65권2호
• /
• pp.33-47
• /
• 2015

The purpose of this study is to understand the ideas of characteristic of convergence design related to slow fashion design. Convergence design in digital stage can be defined as a social phenomenon which different function of product move toward one direction for greater efficiency. Slow fashion is based on the Slow Movement. (This is a movement with similar principles to the Slow Food Movement, as it promotes an alternative mass production, such as fast fashion.) The aims of this research are to study slow fashion that has appeared in the fashion industry through various approaches for convergence designs, and to find the possibility of use for slow fashion. The research method consisted of carrying out case studies and analyzing literatures and proceeding cases. The characteristics of convergence designs are classified into technical convergence, emotion-oriented convergence and complex convergence. Technical convergence has an effect on slow fashion as a multi-functional design. Second, emotion-oriented convergence affects social-cultural design. Slow fashion related to a complex convergence design reveals emotion-oriented deign. Slow fashion is related to convergence design is to expect contribute to provide a good source for the future fashion industry and fashion market.

• Journal of Gastric Cancer
• /
• 제12권2호
• /
• pp.63-72
• /
• 2012

Since the first laparoscopic gastrectomy for cancer was reported in 1994, minimally invasive surgery is enjoying its wide acceptance. Numerous procedures of this approach have developed, and many patients have benefited from its effectiveness, which has been recently demonstrated for early gastric cancer. However, since laparoscopic surgery is not exempt from some limitations, the robotic surgery system was introduced as a solution by the late 1990's. Many experienced surgeons have embraced this new emerging method that provides undoubted technical and minimally invasive advantages. To date, several studies have concentrated to this new system, and have compared it with open and laparoscopic approach. Most of them have reported satisfactory results concerning the post-operative short-term outcomes, but almost all believe that the role of robotic gastrectomy is still out of focus, especially because long-term outcomes that can prove robotic oncologic equivalency are lacking, and operative costs and time are higher in comparison to the open and laparoscopic ones. This article is a review about the current status of robotic surgery for the treatment of gastric cancer, especially, focusing on the technical aspects, comparisons to other approaches and future prospects.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제11권1호
• /
• pp.15-22
• /
• 2005

Healthcare design has been considered as one of the most complex design types. In this study, healthcare design complexity is analysed by the following categories: (1) function; (2) medical technology; (3) scientific knowledge; (4) aesthetics; and (5) interest group complexity. The central questions here are: (1) What is the impact of specialized knowledge on the professional practice; and (2) What are the relationships between design complexity and specialized knowledge. To answer these questions, this study utilizes two approaches, including mail-out questionnaires survey and in-person and focus group interviews. This study found that healthcare design architects emphasize the technical component of specialized healthcare design knowledge. Thus they perceive that architectural research, as a tool to increase specialized healthcare design knowledge, is beneficial to solve the technical components including medical technology and functional problems. In the professional practice, however, architectural research is hardly conducted due mainly to the lack of money and time for it. Different perceptions regarding healthcare design complexity and architectural research among the firms exist, depending on the firm size. These results imply that the knowledge management strategy of large firms can be more efficient to the organizational growth than the small firms.

• 펄프종이기술
• /
• 제44권4호
• /
• pp.62-68
• /
• 2012

This study was carried out to evaluate the effect of PCC loading at thick stock on the physical properties of paper. The effect of starch addition(2, 4 and 6%) and mixing time(5, 10 and 20 min.) on the filler retention and paper properties were investigated. Optimum dosage of cationic starch as a fixing agent was 4%, and mixing time did not showed any significant effect on the filler retention. PCC loading at thick stock was more effective to improve bulk and opacity than PCC loading at thin stock, although their improvement was not so significant. It was also found that the strength properties could be improved by the loading at thick stock. PCC loading method at thick stock could be considered as one of potential approaches for further improving of paper properties, although further research works are required in order to apply the PCC loading at thick stock in the paper mill.

• 펄프종이기술
• /
• 제42권5호
• /
• pp.31-36
• /
• 2010

When corrugated board is folded at the severely low humidity condition, crack can occur along the scored (or creased) lines of linerboard. This phenomenon is called as score (or crease) crack. It is mainly resulted from the excessive concentration of stress on the outer layer of linerboard. To overcome score crack, many approaches including the installation of constant temperature and humidity system, displacement of low grade raw material by long and strong fibers, or application of water have been tried. We examined the effect of the weight fraction of top layer in two-ply sheet, freeness of top layer stock and wet pressing on strain and elastic modulus of sheet to prevent score crack. Lower freeness and higher press load increased the density and elastic modulus of sheet. Pressing load over the $50kgf/cm^2$, however, decreased the strain of sheet. The weight fraction of top layer had positive effect on strain as well as elastic modulus without increasing the density of sheet.

• Journal of Radiation Protection and Research
• /
• 제44권3호
• /
• pp.90-96
• /
• 2019

The contributions of nuclear science and technology in enhancing prosperity and quality of life all over the world and its potential to achieve many important Sustainable Developments Goals (SDGs) of the United Nations are well recognized. It also is now recognized that with fewer students getting attracted to Science, Technology, Engineering and Mathematics (STEM) in general and nuclear science and technology (NST) in particular; hence, there is a vital need to reach out to young students to provide the crucial human resources needed for these endeavours to continue in this highly specialized area. The success of a recently completed IAEA project related to introducing NST during 2012-2016 in secondary schools in the Asia-Pacific region countries encouraged the formulation of a new IAEA TC project RAS0079 entitled "Educating Secondary Students and Science Teachers on Nuclear Science and Technology" for 2018-2021, focusing on enhancing existing educational approaches through training and development opportunities both for teachers and students. The project aims at reaching a million students during the project duration while keeping the depth of learning between teacher and student. The strategy of executing the project, implementation status and its impact so far is presented in this paper.