• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.4
• /
• pp.349-358
• /
• 2015

The research and development trend of Trajectory-based Operations(TBO), which is considered as a key concept of future Air Traffic Management(ATM), is presented in this paper. The operational concepts of TBO in ASBU(Aviation System Block Upgrade) from ICAO(International Civil Aviation Organization) have been summarized, and the detailed operational concepts and procedures, which can be realized in the near future, are described through the investigations of operational concept development and related research/development activities of TBO in USA and Europe. The technical enablers, which have been identified based on understanding of TBO operational concepts, are introduced, and related research/development status of each technical enabler has been presented.

• Journal of the Korean Society of Systems Engineering
• /
• v.2 no.2
• /
• pp.39-44
• /
• 2006

With the advent of low cost, miniature and high-g hardened inertial sensors and actuators, many kind of smart munitions are becoming practical such as 1D or 2D TCM, SFM, Range Extended GPS guided munitions and so on. They have more complicated trajectory control algorithm than conventional munitions'. Therefore it is necessary to study the complicated operation algorithm of smart munitions with M&S in advance of developing them. The purpose of this paper is to introduce a practical M&S method to study an operation concept of smart munitions using PRODAS and Matlab.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.255-255
• /
• 2000

Technical advance of electrical chart and cruising equipment make it possible to sail without a man. It is important to decide the cruising route in view of effectiveness and stability of a ship. So we need to study on the optimal trajectory planning. Genetic algorithm is a strong optimization algorithm with adaptational random search. It is a good choice to apply genetic algorithm to the trajectory planning of a ship. We modify a genetic algorithm to solve this problem. The effectiveness of the revised genetic algorithm is assured through computer simulations.

• Journal of Information Technology Applications and Management
• /
• v.28 no.1
• /
• pp.63-81
• /
• 2021

The advent of the convergence era led to the convergence of industries while increasing the uncertainty of R&D. R&D uncertainty can be addressed by identifying and addressing industrial innovation patterns, which Neo-Schumpeterian suggested can be identified through the process of identifying the technical characteristics of a particular industry, which can be embodied in the concept of technology trajectory. Thus, this study considered and proposed a method to track the technology trajectory of the convergence industry through topic modeling and patent citation network analysis, and applied it to the micro medical robot industry, which is a representative convergence industry, to track the technology trajectory of active catheter. In particular, it is intended to identify the unique characteristics of the industry by identifying the industry before the promotion of the national-led medical robot industry support policy. Therefore, we tried to understand the innovation pattern of the industry by tracking the technology trajectory of the industry before 2017, the time of full-scale support for the medical robot industry in the United States. Through tracking technology trajectories, the role of each technology classification, the development path, and the knowledge flow between applicants were analyzed empirically. The results of this study are expected to contribute to resolving the remaining uncertainties in the process of establishing an active catheter R&D strategy, one of the leading convergence industries, and furthermore, it is expected to be available for tracking technology trajectories in other industries.

• Journal of Navigation and Port Research
• /
• v.47 no.2
• /
• pp.49-56
• /
• 2023

As interest in autonomous ships continues to grow, researchers around the world are dedicating themselves to the development of relevant technologies. However, these technologies are not yet perfect. Several technical problems remain unresolved. To address these problems, this study presents the implementation of a ship trajectory algorithm for group navigation, where followers can navigate by following the trajectory of a leader. The algorithm works by storing the leader's trajectory as a follow-point and by calculating the azimuth using the line-of-sight guidance law to reach it. A course-keeping controller based on PD control is implemented to follow the target course and a speed control algorithm is designed to prevent collisions. Sea experiments were conducted using 1 m class small RC model boats to verify the proposed algorithm. The follower successfully navigated by following the leader's trajectory and maintained the designated distance to the forward boat. This study is significant in that it implements an algorithm for the follower to follow the trajectory of the leader rather than directly following it as in conventional methods, and verifies it through sea experiments.

• 전자공학회논문지 IE
• /
• v.46 no.4
• /
• pp.73-77
• /
• 2009

This paper presents the trajectory tracking control for mobile robot. The designed controller consists of kinematic and dynamic controller. Kinematic controller has two gains and it reduces the trial time for gain setting as compared convectional controller with three gains. Dynamic controller includes the compensation of friction and disturbance. It can improve the performance of the trajectory tracking under the various environment. Simulation results shows that the proposed controller has a stable performance.

• Atmosphere
• /
• v.24 no.2
• /
• pp.245-251
• /
• 2014

Statistical trajectory analysis has been widely used to identify potential source regions for chemically and radiatively important chemical species in the atmosphere. The most widely used method is a statistical source-receptor model developed by Stohl (1996), of which the underlying principle is that elevated concentrations at an observation site are proportionally related to both the average concentrations on a specific grid cell where the observed air mass has been passing over and the residence time staying over that grid cell. Thus, the method can compute a residence-time-weighted mean concentration for each grid cell by superimposing the back trajectory domain on the grid matrix. The concentration on a grid cell could be used as a proxy for potential source strength of corresponding species. This technical note describes the statistical trajectory approach and introduces its application to estimate potential source regions of $CO_2$ enhancements observed at Korean Global Atmosphere Watch Observatory in Anmyeon-do. Back trajectories are calculated using HYSPLIT 4 model based on wind fields provided by NCEP GDAS. The identified $CO_2$ potential source regions responsible for the pollution events observed at Anmyeon-do in 2010 were mainly Beijing area and the Northern China where Haerbin, Shenyang and Changchun mega cities are located. This is consistent with bottom-up emission information. In spite of inherent uncertainties of this method in estimating sharp spatial gradients within the vicinity of the emission hot spots, this study suggests that the statistical trajectory analysis can be a useful tool for identifying anthropogenic potential source regions for major GHGs.

• Korean Journal of Applied Biomechanics
• /
• v.23 no.4
• /
• pp.295-306
• /
• 2013

The purpose of this study was to provide high school male shot putters training methods of gliding and delivery motion through comparative analysis of kinematic characteristics. To accomplish this purpose, three dimensional motion analysis was performed for the subjects(PKC, KKH, YDL) who participated in high school male shot putter competition on 92nd (2011), 93rd (2013) National Sports Festival. The subjects were filmed by four Sony HXR-MC2000 video cameras with 60 fields/s. The three-dimensional kinematic data of the glide, conversion and delivery phase were obtained by Kwon3d 3.1 version. The data of the shoulder rotational angles and projection angles were calculated with Matlab R2009a. The following conclusions had been made. With the analysis of the gliding and stance length ratio, the gliding length was shorter at the TG than the SG with short-long technique but the gliding and stance length ratio was 46.8:53.2% respectively. The deviation of the shots trajectory from APSS(Athlete-plus-shot-system) revealed that the PKC showed similar to "n-a-b-c-I" of skilled S-shape type, KKH and YDL showed "n-a-d-f-I'" of unskilled type. Furthermore, they showed smaller radial distance from the central axis of the APSS and the shots were away from the linear trajectory. From this characteristics, The PKC who performed more TG than SG had shorter glide with S-shape of APSS(skilled type) showed the better record than others with technical skill. But KKH and YDL had bigger glide ratio with "n-a-d-f-I'" of unskilled type and improved their records with technical factor. The projection factor had an effect on the record directly. Because PKC maintained more lower glide and transition posture with momentum transfer through COG's rapid horizontal velocity respectively the subject possessed the characteristics of high horizontal and vertical velocity with large turning radius from shot putter to APSS.

• Journal of Drive and Control
• /
• v.17 no.2
• /
• pp.45-54
• /
• 2020

The IMV is a combination of four two-way valve systems which replace a conventional four-way spool valve to improve efficiency mostly in excavator hydraulics. As the environmental regulations for construction equipment have tightened, some overseas advanced companies have released commercial excavators in which the MCV is implemented with the IMVs. Development of the IMV type MCV relies on the control algorithm as well as the robust performance of proportional flow control valves. In this study, the IMV controller was designed and verified with experiments for the excavator working unit, which determines the IMV mode of operation and the extent of the valve opening in consideration of the load conditions on hydraulic actuators. First, the open-loop controller was designed with a joystick command vs. a PSV reference current map comprising several control parameters in to compensate for the different flow characteristics and non-linearities of two-way flow control valves. Second, the closed-loop controller was designed with the PI control fed by the actuator displacement and outputs actuator percent effort equivalent to the operator's joystick command. Finally, the performance of the IMV type MCV was verified with the trajectory control of position references derived from the energy consumption test standard. Experimental results showed the control performance of the IMV developed in this study, and suggest that future studies to be conducted to advance technical progress.

• Journal of Internet of Things and Convergence
• /
• v.6 no.3
• /
• pp.59-65
• /
• 2020

The Internet of Things (IoT) era, in which all items used in daily life are equipped with a network connection function, and they are closely linked to increase the convenience of life and work, has opened wide. Robots also need to develop according to the IoT environment. A use of new type of evolved fuzzy machine (EFM) for generating legged robot trajectory in IoT enviornmentms is discussed in this paper. Fuzzy system has been widely used for describing nonlinear systems. In fuzzy system, determination of antecedent and consequent structures of fuzzy model has been one of the most important problems. EFM is described which carries out evolving antecedent and consequent structure of fuzzy system for legged robot. To generate the robot trajectory, parameters of each structure in the fuzzy system are tuned automatically by the EFM. The results demonstrate the performance of the proposed approach for the legged robot.