• Journal of the Korean Society for Nondestructive Testing
• /
• v.18 no.6
• /
• pp.455-463
• /
• 1998

RCCA(rod cluster control assembly) End-Tip suffers from neutron irradiation and constant vibration due to high-speed internal flow of primary coolant during plant operation. Such operating conditions cause the RCCA end-tip crackings around tile circumferential weldment of the end-tip, and in some cases, the defective end-tips were completly broken loose. However, no reliable inspection techniques for end-tip crackings were developed in the past, although some techniques exist for inspecting RCCA control rod wears. Therefore, NDE group at KEPRI has developed an ECT technique for the detection and the sizing of the end-tip crackings. The technique uses a specially designed surface-riding probe that can detect size of circumferential crackings with an accuracy of ${\pm}5.31%$ RMS error. This paper describes the ECT instrumentation including the ECT probes, calibration bars, as well as technical approaches.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.9
• /
• pp.552-558
• /
• 2016

Recently, the repair and reinforcement of deteriorated concrete buildings has attracted much interest. In order to accurately evaluate the safety of these existing structures, it is essential to know the strength of the concrete that they are composed of. The core drilling method is considered to be the most effective and common method of assessing the compressive strength of concrete. In general, the regulations do not permit the core specimens within reinforcing bars to be used to assess the strength of the concrete, even if the core specimens contain reinforcing bars in some cases. The purpose of this study is to investigate the effects of the reinforcement arrangement on the compressive strength of concrete, and to propose the quantitative specific standard of strength for core specimens containing reinforcements, in order to facilitate their safe inspection by repair or retrofit companies who want to evaluate the soundness of the structures. To complete this research, one type of cylinder specimen without reinforcement and 14 types of specimens with reinforcement arrangements were prepared and their compressive strength evaluated. It was found that the strength of the cylinders with reinforcement volumes of up to $50cm^3$ (about 4-ϕ13mm) was more than 80% of that of the cylinders without any reinforcement.

• The Korean Nurse
• /
• v.37 no.2
• /
• pp.44-52
• /
• 1998

The purpose of this study is to inquire the people's views on nursing for nurses, correct the image of nurse and take it as basis to be applied on nursing education examining the image of nursing on Television drama playing important role of mass media. 22 nurses of the characters in drama is applied to the analysis object of this study by selecting 6 dramas of Television ones the nurse play on the prime time from June 1 to August 31 in 1997. Contents analysis method was used in Data Analysis, 4 items was used after Coders previously modify and compensate it based on research documents of 1m Milim(1996) 2 Coders made the Coding the article on each person by them seeing the recorded film making the Coding Paper each items is written by the character. The average of reliability degree was 90% which measured the reliability degree by the mathod of Holsti. The statisic method of frequency, percentage was used SPSS Program in data processing The results were as follows. 1. Relative importance of 86.2% nurses in drama was depicted as extra characters 2. The affair attitude of nurses shown on drama was revealed as mechanical(84.7%), passive(45.5%), dependent(54.4%) unkind(68.2%). 3. The activity of nurses was classified with professional! simple affair. The professional affairs such as I.V., Blood Pressure Check, Rounding, Nursing Recording, Patient Education, Assist of Operation, Assistant meal of Patient, etc is mainly depicted and the screen of simple affair such as Receiving telephone, Carrying Tray or Dragging, Stretcher Car, Dressing Car and or Wheel Chair than professional affair. 4. The appearance feature of nurses was shown on thin physique(68.2%), common stature(68.2), dirty costume(45.4%), common appearance(81.9%), unnoble action(63.6%). The image of nurses is illuminated as the exterial scene of technical affair such as assisting the doctors and affair focused on accident and educational activity of nureses or extended role is nor depicted on Television drama. Therefore, the people regard the nurse as sexual object with good appearance than professional worker working professional nursing We want the following, epigraph based on above conclusion. 1. The continuous research is required on the image of nurse shown on various mass media. 2. The later research is required on appliction strategy of mass media for advancing the image of nurse. 3. The research to strengthen the objectivity by comparing analyzed data on drama & analyzing it is required 4. Through the deep study, the standard to show a concrete and professional work of nurses to scenario writers of TV drama is suggested by the association. 5. The monitoring about the mass media must be activated, not by some nurses, on a national scale and much study on the basis of this is needed.

• Journal of Korean Neurosurgical Society
• /
• v.60 no.5
• /
• pp.597-603
• /
• 2017

Objective : Several surgical methods have been reported for treatment of ossification of the posterior longitudinal ligament (OPLL) in the thoracic spine. Despite rapid innovation of instruments and techniques for spinal surgery, the postoperative outcomes are not always favorable. This article reports a minimally invasive anterior decompression technique without instrumented fusion, which was modified from the conventional procedure. The authors present 2 cases of huge beak-type OPLL. Patients underwent minimally invasive anterior decompression without fusion. This method created a space on the ventral side of the OPLL without violating global thoracic spinal stability. Via this space, the OPLL and anterior lateral side of the dural sac can be seen and manipulated directly. Then, total removal of the OPLL was accomplished. No orthosis was needed. In this article, we share our key technique and concepts for treatment of huge thoracic OPLL. Methods : Case 1. 51-year-old female was referred to our hospital with right lower limb radiating pain and paresis. Thoracic OPLL at T6-7 had been identified at our hospital, and conservative treatment had been tried without success. Case 2. This 54-year-old female with a 6-month history of progressive gait disturbance and bilateral lower extremity radiating pain (right>left) was admitted to our institute. She also had hypoesthesia in both lower legs. Her symptoms had been gradually progressing. Computed tomography scans showed massive OPLL at the T9-10 level. Magnetic resonance imaging of the thoracolumbar spine demonstrated ventral bony masses with severe anterior compression of the spinal cord at the same level. Results : We used this surgical method in 2 patients with a huge beaked-type OPLL in the thoracic level. Complete removal of the OPLL via anterior decompression without instrumented fusion was accomplished. The 1st case had no intraoperative or postoperative complications, and the 2nd case had 1 intraoperative complication (dural tear) and no postoperative complications. There were no residual symptoms of the lower extremities. Conclusion : This surgical technique allows the surgeon to safely and effectively perform minimally invasive anterior decompression without instrumented fusion via a transthoracic approach for thoracic OPLL. It can be applied at the mid and lower level of the thoracic spine and could become a standard procedure for treatment of huge beak-type thoracic OPLL.

• KIPS Transactions on Computer and Communication Systems
• /
• v.3 no.10
• /
• pp.383-392
• /
• 2014

The research for coatings is one of the most popular and active research in the polymer industry. For the coatings, electronics industry, medical and optical fields are growing more important. In particular, the trend is the increasing of the technical requirements for the performance and accuracy of the coatings by the development of automotive and electronic parts. In addition, the industry has a need of more intelligent and automated system in the industry is increasing by introduction of the IoT and big data analysis based on the environmental information and the context information. In this paper, we propose an optimization model for the design of experiments based coating formulation data objects using the Internet technologies and big data analytics. In this paper, the coating formulation was calculated based on the best data analysis is based on the experimental design, modify the operator with respect to the error caused based on the coating formulation used in the actual production site data and the corrected result data. Further optimization model to correct the reference value by leveraging big data analysis and Internet of things technology only existing coating formulation is applied as the reference data using a manufacturing environment and context information retrieval in color and quality, the most important factor in maintaining and was derived. Based on data obtained from an experiment and analysis is improving the accuracy of the combination data and making it possible to give a LOT shorter working hours per data. Also the data shortens the production time due to the reduction in the delivery time per treatment and It can contribute to cost reduction or the like defect rate reduced. Further, it is possible to obtain a standard data in the manufacturing process for the various models.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.2
• /
• pp.147-153
• /
• 2016

The lightning protection of information and communication facilities is very important factor to improve a reliability of the action of these equipment. Especially the transient potential rise of ground electrode being injected with the lightning current is to be a basic data of the dielectric strength for both power and communication facilities so that more accurate analysis should be required. The transient potential rise can be calculated from the ground impedance and the ground impedance is strongly dependent upon the shape of the ground electrode and the frequency-dependence of soil. The Debye's equation which is able to calculate the characteristics of dielectrics is used to analyze the frequency-dependent of soil. Also, the method to calculate the transient potential rise from the ground impedance is specified in this paper. In order to analyze the transient potential rise resulting from calculations with Debye's equation, TLM(transmission line method) and case of ${\rho}$(resistivity)-constant are simulated, respectively. The length of a horizontal ground electrode is 30 m and simulations were performed at 10, 100, $1000{\Omega}{\cdot}m$ with the standard lightning current waveform. In result, the transient potential rise of horizontal ground electrode calculating with Debye's equation is lower than it of other models.

• Korean Journal of Remote Sensing
• /
• v.25 no.1
• /
• pp.71-83
• /
• 2009

This paper is written to analyze possible problems encountered with the existing data for the monitoring of land use and land cover change over the Korean peninsula and, further, to provide technical alternatives for the future land monitoring over the area. The oldest type of non-spatial data related to the land use change are cadastral statistics obtained since 1911. Annual statistics of cadastral data in early years (before 1942) can be used to assess land use change over the area. However, the cadastral statistics after the Korean War are not very appropriate for land use monitoring since the land class in cadastral data does not always correspond with actual land cover status. Majority of spatial data available for land monitoring over the area are land cover maps classified from satellite imagery since early 1970's. To analyze the suitability of land cover maps that were produced by two separate institutes with about 10 years interval, we conducted simple change detection analysis using these maps. These maps were not quite ready to be compared each other, in which they did not have the same class definition, classification method, and geometric registration. To achieve continuous and effective monitoring of land use and land cover change, particularly over North Korea, we should have a standard scheme in type and season of satellite imagery, image classification procedure, and class definition, which also should correspond to international standards.

• Journal of Korea Port Economic Association
• /
• v.30 no.1
• /
• pp.159-173
• /
• 2014

This study is key competence port logistics companies analyze the priorities of evaluation factors. key competence index of NCS(National competency standard) was designed on the basis of the research model. The priorities of evaluation factors were analyzed using AHP method. The results of the analysis of 1 layer's key competence priorities are as follows: Interpersonal skills(0.217), communication skills(0.153), ability to develop problem(0.148), ability to understand the organization(0.103), and resource management skills(0.090), self-development ability and professional ethics(0.070), information skills(0.065), technical skills(0.049), numeracy skills(0.035).

• Publications of The Korean Astronomical Society
• /
• v.36 no.3
• /
• pp.79-95
• /
• 2021

This study aims to develop a restoration model of an armillary sphere of Tongcheon-ui (Pan-celestial Armillary Sphere) by referring to the records of Damheonseo (Hong Dae-Yong Anthology) and the artifact of an armillary sphere in the Korean Christian Museum of Soongsil University. Between 1760 and 1762, Hong, Dae-Yong (1731-1783) built Tongcheon-ui, with Na, Kyung-Jeok (1690-1762) designing the basic structure and Ann, Cheo-In (1710-1787) completing the assembly. The model in this study is a spherical body with a diameter of 510 mm. Tongcheon-ui operates the armillary sphere by transmitting the rotational power from the lantern clock. The armillary sphere is constructed in the fashion of a two-layer sphere: the outer one is Yukhab-ui that is fixed; and the inner one, Samsin-ui, is rotated around the polar axis. In the equatorial ring possessed by Samsin-ui, an ecliptic ring and a lunar-path ring are successively fixed and are tilted by 23.5° and 28.5° over the equatorial ring, respectively. A solar miniature attached to a 365-toothed inner gear on the ecliptic ring reproduces the annual motion of the Sun. A lunar miniature installed on a 114-toothed inner gear of the lunar-path ring can also replay the moon's orbital motion and phase change. By the set of 'a ratchet gear, a shaft and a spur gear' installed in the solstice-colure double-ring, the inner gears in the ecliptic ring and lunar-path ring can be rotated in the opposite direction to the rotation of Samsin-ui and then the solar and lunar miniatures can simulate their revolution over the period of a year and a month, respectively. In order to indicate the change of the moon phases, 27 pins were arranged in a uniform circle around the lunar-path ring, and the 29-toothed wheel is fixed under the solar miniature. At the center of the armillary sphere, an earth plate representing a world map is fixed horizontally. Tongcheon-ui is the armillary sphere clock developed by Confucian scholars in the late Joseon Dynasty, and the technical level at which astronomical clocks could be produced at the time is of a high standard.

• Korean Journal of Remote Sensing
• /
• v.37 no.5_3
• /
• pp.1425-1434
• /
• 2021

Continuous and periodic data acquisition must be preceded to maintain and manage the river facilities effectively. Adapting the existing general facilities methods, which include river surveying methods such as terrestrial laser scanners, total stations, and Global Navigation Satellite System (GNSS), has limitation in terms of its costs, manpower, and times to acquire spatial information since the river facilities are distributed across the wide and long area. On the other hand, the Mobile Mapping System (MMS) has comparative advantage in acquiring the data of river facilities since it constructs three-dimensional spatial information while moving. By using the MMS, 184,646,009 points could be attained for Anyang stream with a length of 4 kilometers only in 20 minutes. Levee points were divided at intervals of 10 meters so that about 378 levee cross sections were generated. In addition, the waterside maximum and average slope could be automatically calculated by separating slope plane form levee point cloud, and the accuracy of RMSE was confirmed by comparing with manually calculated slope. The reference slope was calculated manually by plotting point cloud of levee slope plane and selecting two points that use location information when calculating the slope. Also, as a result of comparing the water side slope with slope standard in basic river plan for Anyang stream, it is confirmed that inspecting the river facilities with the MMS point cloud is highly recommended than the existing river survey.