• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.5
• /
• pp.14-28
• /
• 2018

Thanks to technical improvement on the vehicle to vehicle communication and the intelligent transportation system, gradual introduction of the autonomous vehicles is expected soon in the market. The study analyzes the autonomous vehicles' impacts on the network efficiencies. In order to measure the network efficiencies, the study applies the sequential procedures that combines the microscopic and macroscopic simulations. The microscopic simulation attends to the capacity changes due to the autonomous vehicles' proportions on the roadway while the macroscopic simulation utilizes the simulation results in order to identify the network-wide improvement. As expected, the autonomous vehicles efficiently utilizes the existing capacity of the roadway than the human driving does. Particularly, the maximum capacity improvements are expected by the 190.5% on the expressway. The significant capacity change is observed when the autonomous vehicles' proportions are about 80% or more. These improvements are translated into the macroscopic model, which also yields overall network efficiency improvement by the autonomous vehicles' penetration. However, the study identifies that the market debut of the autonomous vehicles does not promise the free flow condition, which implies the possible needs of the system optimal routing scheme for the era of the autonomous vehicles.

• Ecology and Resilient Infrastructure
• /
• v.7 no.1
• /
• pp.63-71
• /
• 2020

Various types of amendments have been studied for heavy metal stabilization in soil. However, researches on the effect of amendments on alkali soil and their effects on the plants at various edible parts are insufficient. The aim of this study was to evaluate the stabilization efficiency of heavy metals and their transfer into edible parts of food crops. Abandoned mine area was selected and 3 types of amendments (lime stone, LS; steel slag, SS; acid mine drainage sludge, AMDS) was applied with 3% (w/w). in field. After 6 month aging, Chinese cabbage (leafy), bok choy (leafy), garlic (root) and red pepper (fruit) were transplanted and cultivated. For chemical assessment, total concentration and bioavailability using Mehlich-3 solution were determined. For biological assessment, fresh weight and heavy metal uptakes were analyzed. It was revealed that AMDS reduced bioavailability most effectively, resulting in the decrease in heavy metal concentration in edible parts of all crops. When explaining the heavy metal uptake of plants, the bioavailability was more appropriate than the total contents of soil heavy metals. Therefore, bioavailability-based further research and management practices should be carried out continuously for the sustainable environment management, safe crop production, and human health risk reduction.

• 대한공업교육학회지
• /
• v.36 no.1
• /
• pp.47-73
• /
• 2011

The purpose of the study was to examine cooperative education between industry and school recognized by tentatively called managers of cooperative education, teachers in charge of cooperative education between industry and school, in vocational high school in Incheon Area. In order to accomplish the study purpose, the study conducted a research through questionnaire and examined their recognition for cooperative education between industry and school focusing on curriculum (purpose and content), operational system including supporting system (establishment and operational level) and educational type (process, effectiveness, problems and reinforcing measures). The study conducted a survey using Likert 5 score scale and analyzed the survey results using technical statistics such as frequency, average, standard deviation, etc. From the comprehensive results from the survey, it was found that although outcomes from industry-school cooperation are relatively high, participation is insufficient and intermediating organizations connecting concerned parties and mediating them are not enough because recognition and will of interested parties of industry-school cooperation are not sufficient. In addition, policies, legal and systematical and financial infrastructure for activation and efficiency of industry-school cooperation are not established perfectly, therefore, there are a lot of things to be improvement in operation. In particular, it was observed that establishment of internal organization and infrastructure for the number of workers in vocational training organizations are decisively inadequate.

• Korean Security Journal
• /
• no.61
• /
• pp.9-38
• /
• 2019

As the scales & density of the Korean national infrastructures have been increased, they will be identified as rich and attractive potential targets for intensified North Korea's attack in the rear region and terrorism attack. In addition, due to changes in security environment such as drone threats and lack of security forces under the 52-hour workweek law, I think that it is the proper time point to reevaluate the effectiveness and appropriateness of the current physical protection system and its shift to a new system. In this study, the direction and improvement of the perimeter physical protection systems of the national infrastructures are to be studied from the viewpoints of its concepts of operations and design methodology, focusing on the nuclear power plant. The reason why we focus on nuclear power plants is because they cause wide-range and long-term damages caused by radioactive materials disperal and pollution, along with short-term damage caused by the interruption of electricity generation in the event of damage to nuclear power plants. With the aim of extracting improvement directions, as we will comprehensively review domestic research trends and domestic·overseas related laws, and consider Korea's specificity, we try to reframe the concept of operation - systematization, mobilization and flexibility -, and establish criteria on system change. In order to improve the technical performance of the new perimeter physical protection system, we study on high-fidelity·multi-methodology based integrated design methodology, breaking from individual silo-type design methods, and I suggest improvement of government procurement, its expansion to export business and other national infrastructure.

• Asia pacific journal of information systems
• /
• v.23 no.4
• /
• pp.129-149
• /
• 2013

According to the development of new Information Technologies, firms consistently invest a significant amount of money in IT activities, such as establishing internal and external information systems. However, several anti-Information activities-such as hacking, leakage of information and system destruction-are also rapidly increasing, thus many firms are exposed to direct and indirect threats. Therefore, firms try to establish information security systems and manage these systems more effectively via an enterprise perspective. However, stakeholders or some managers have negative opinions about information security systems. Therefore, in this research, we study the relationship between multibusiness firms' performance and information security systems. Information security indicates physical and logical correspondence of information system department against threats and disaster. Studies on information security systems suggested frameworks such as IT Governance Cube and COBIT Framework to identify information security systems. Thus, this study define that information security systems is a controlled system on enterprise IT process and resource on IT Governance perspective rather than independent domain of IT. Thus, Information Security Systems should be understood as a subordinate concept of IT and business processes. In addition, this study incorporates information capability to information security system literature to show the positive relationship between Information Security Systems and Corporate Performance. The concept of information capability suggested that an interaction of human, information, technical and an effect on corporate performance using three types of capability (IT Practice, Information Management Practice, Information Behaviors and Values). Information capability is about firms' capability to manage IT infrastructure and information as well as individual employees who use IT infrastructure and information. Thus, this study uses information capability as a mediating variable for the relationship between information security systems and firms' performance. To investigate the relationship between Information Security Systems and multibusiness firms' performance, this study extends the IT relatedness concept into Information Security Systems. IT relatedness provides understanding of how corporations cope with conflicts between headquarters and business units to create a synergy effect and achieve high performance using IT resources. Based on the previous literature, this study develops the IT Security Relatedness model. IT Security Relatedness is our main independent variable, while Information Capability and Information Security Performance are mediating variables. To control for the common method bias, we collect each multibusiness firm's financial performance and use it as our dependent variable. We find that Information Security Systems influence Information Capability and Information Security Performance positively, and these two variables consequently influence Corporate Performance positively. In addition, this result indirectly shows that corporations under a multibusiness environment can obtain synergy effects using the integrated Information Security Systems. This positive impact of Information Security Systems on multibusiness firms' performance has an important implication to various stakeholders. Therefore, multibusiness firms need to establish Information Security Systems to achieve better financial performance.

• Korean Journal of Remote Sensing
• /
• v.37 no.2
• /
• pp.359-365
• /
• 2021

GEO-KOMPSAT-2A (GK2A) AMI (Advanced Meteorological Imager) Best Detector Select (BDS) map is pre-determined and uploaded before the satellite launch. After the launch, there is some possibility of a detector performance change driven by an abrupt temperature variation and thus the status of BDS map needs to be evaluated and updated if necessary. To investigate performance of entire elements of the detectors, AMI BDS analyses were conducted based on a technical note provided from the AMI vendor (L3HARRIS). The concept of the BDS analysis is to investigate the stability of signals from detectors while they are staring at targets (deep space and internal calibration target). For this purpose, Long Time Series (LTS) and Output Voltage vs. Bias Voltage (V-V) methods are used. The LTS for 30 secs and the V-V for two secs are spanned respectively for looking at the targets to compute noise components of detectors. To get the necessary data sets, these activities were conducted during the In-Orbit Test (IOT) period since a normal operation of AMI is stopped and special mission plans are commanded. With collected data sets during the GK2A IOT, AMI BDS map was intensively examined. It was found that about 1% of entire detector elements, which were evaluated at the ground test, showed characteristic changes and those degraded elements are replaced by alternative best ones. The stripping effects on AMI raw images due to the BDS problem were clearly removed when the new BDS map was applied.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.42 no.3
• /
• pp.427-438
• /
• 2022

With the recent growing importance over safety management the need for advanced and technical approaches for on-site safety inspection methods has increased. Railway construction is subject to its own particular set of temporal and spatial challenges due to its unique facilities and equipment. This study aimed to investigate the field characteristics of railway infrastructure and improve the conventional field safety management methods by identifying the most appropriate features of AR technology. Group interviews and surveys were conducted with field safety experts to derive the major problems and inspection needs. Subsequently, various features of AR, such as BIM model projection, and remote conferencing, were investigated to determine their applicability to address safety issues. As a result, four problems in the current safety management process, such as 'lack of time due to the conventional inspection method and inspection of areas that are difficult to access', and three major inspection types, such as 'observance of work procedures, status of installation, adequate dimensional spacing', were identified to be improved when adopting AR based techniques. Furthermore, AR technology utilizing plans to solve safety inspection problems and effectively manage major inspection types were proposed, and a follow up survey was conducted with the same field safety experts to derive the priority of technology development.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.4
• /
• pp.2036-2047
• /
• 2014

Now that there is no more barrier in terms of the global countries, every country begins to show its interest in the regional industry in order to boost local growth and economy revitalization preparing for the globalization, the age of limitless competition and the age of knowledge economy. The reason of the interesting in the regional industry is that it fosters the profitable environment that promotes technical innovation and knowledge creation. The local government should have continual concern and roles to fulfil the political subjects and keep analysing about the possibility that there could be the sustainable development by Task Ahead of the local industry. for this reason, this paper conducted a survey by targeting supported corporations's experience of supporting projects in the regional industry and the relationship impact of supporting projects in the regional industry. the elements are analyzed by PLS structural equation. To sum up, first, the improving of 'infrastructure Usage', 'Technical development', 'Marketing support', 'Attraction of investment', 'Manpower training' is impacted on Industrial development. Second, the improving of 'Joint research', 'Technology transfer', 'Attraction of investment', 'Manpower training', 'Networking ' is impacted on Regional development. Third, improving of Industrial development is impacted on Regional development.

• Radiation Oncology Journal
• /
• v.24 no.4
• /
• pp.211-216
• /
• 2006

$\underline{Purpose}$: An analysis of the infrastructure for radiotherapy in Korea was performed to establish a baseline plan in 2006 for future development. $\underline{Materials\;and\;Methods}$: The data were obtained from 61 radiotherapy centers. The survey covered the number of radiotherapy centers, major equipment and personnel. Centers were classified into technical level groups according to the IAEA criteria. $\underline{Results}$: 28,789 new patients were treated with radiation therapy in 2004. There were 104 megavoltage devices in 61 institutions, which included 96 linear accelerators, two Cobalt 60 units, three Tomotherapy units, two Cyberknife units and one proton accelerator in 2006. Thirty-five high dose rate remote after-loading systems and 20 CT-simulators were surveyed. Personnel included 132 radiation oncologists, 50 radiation oncology residents, 64 medical physicists, 130 nurses and 369 radiation therapy technologists. All of the facilities employed treatment-planning computers and simulators, among these thirty-two percent (20 facilities) used a CT-simulator. Sixty-six percent (40 facilities) used a PET/CT scanner, and 35% (22 facilities) had the capacity to implement intensity modulated radiation therapy. Twenty-five facilities (41%) were included in technical level 3 group (having one of intensity modulated radiotherapy, stereotactic radiotherapy or intra-operative radiotherapy system). $\underline{Conclusion}$: Radiation oncology in Korea evolved greatly in both quality and quantity recently and demand for radiotherapy in Korea is increasing steadily. The information in this analysis represents important data to develop the future planning of equipment and human resources.

• Journal of Distribution Science
• /
• v.17 no.2
• /
• pp.53-69
• /
• 2019

Purpose - National scientific technology R&D investment is exceeding 60 trillion won per year, and the results of patent applications and technology transfers are visually improving. However, despite the improving research results of national R&D, the practical results of technology startups are mediocre. It is now time to expand the construction of the technology commercialization ecosystem, where the expansion of national R&D leads to the results of technology startups. Therefore, this study discussed the measures to increase the competitiveness of technology startups through the factual survey of the companies that benefitted from R&D support programs. Research design, data, and methodology - This study targeted 996 companies that benefitted from the R&D projects of the Technology Transfer Center for National R&D Programs, and deducted itemized issues through the survey replies. Survey questions were prepared to estimate the national R&D results, and the technology recognition path, the purpose of detailed introduction of the technology, investment of the commercialization fund, economic results, and the factors of success and failure were analyzed. Results - As for the recognition rate of technology during the process of corporate technology commercialization through the technology transfer, recognition through project participation showed a high response rate, and diverse implications of technology commercialization were deducted through the analysis of economic results. As for the resolution alternatives, the proliferation of technology commercialization platform that can create excellent technology for the companies in early stages and the measure of expanding the distribution of technology infrastructure were suggested. In this study, public technology commercialization strategy is established, and the innovative marketing strategy is presented. Conclusions - This study reveal that the result of creating scientific technology jobs should be deducted, in order to produce the revolutionary results of job creation by suggesting the success models of technology commercialization based on domestic scientific technology. In particular, even though the support systems for public research results are being diversely suggested, accurate studies on their actual conditions are currently lacking. Therefore, this study suggest realistic political alternatives to assure results in the process of public technology commercialization, by examining the current state of public research results of R&D support institutions and diagnosing the issues.