• 한국수자원학회논문집
• /
• 제41권6호
• /
• pp.597-603
• /
• 2008

본 연구는 수자원정책의 효율성 제고를 위한 정책 방안 마련의 토대를 제공하고자 제조업체에서 투입요소로 사용하고 있는 공업용수의 기술적 효율성을 추정하였다. 이를 위하여 자료포락분석(DEA:Data Envelopment Analysis)기법을 이용하였으며 분석 결과에 의하면 공업용수의 기술적 효율성은 전 산업 평균이 0.407로 추정되어 모든 투입요소가 가변적인 경우의 연구 사례에 비하여 낮은 추정치를 보여준다. 이는 공업용수에 대한 비용이 다른 투입요소에 비하여 낮아 기업 경영진이 공업용수의 효율적인 활용 필요성에 상대적으로 둔감한 결과로 볼 수 있다. 그리고 낮은 기술적 효율성 추정치는 모든 투입요소가 효율적이라고 가정하고 분석한 기존 연구들의 가정에 한계가 있음을 보여 준다.

• 한국통신학회논문지
• /
• 제31권3B호
• /
• pp.239-253
• /
• 2006

미래 핵심인 SW산업의 국제 경쟁력 확보를 위하여, SW 분야의 세계적인 기술변화에 대응하고 향후 SW 산업의 분석 및 설계를 주도할 아키텍트 수준의 SW 기술 인력 양성이 요구된다. 그러나 현재의 상황은 일정 수준의 경력에 따른 SW 기술 인력이 일반관리자로 전직하는 경향을 보이고 있다. 이러한 현실을 해결하고 SW 기술 인력의 질적 수준을 제고하기 위해서 국내 SW 기술 인력의 체계적이고 효과적인 성장방향을 제시하는 것이 필요하다. 따라서 본 논문에서는 국내 SW 기술 인력의 체계적이고 효과적인 성장방향을 제시하면서, 고급 SW 분석/설계 인력의 경력 경로를 제시하며 이를 실현할 수 있는 방만을 제시하고자 한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 춘계학술대회 논문집 전기설비전문위원
• /
• pp.4-6
• /
• 2005

This paper deals with the technical map of diagnosis for power cable systems. For this purpose, failure status, failure and degradation causes, and newly suggested diagnostic techniques were investigated and analyzed. From the analysis, the technical map of diagnosis for power cable systems was proposed.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2005년도 하계학술발표대회
• /
• pp.47-47
• /
• 2005

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2003년도 하계학술대회 논문집
• /
• pp.120-120
• /
• 2003

• 한국통신학회:학술대회논문집
• /
• 한국통신학회 2004년도 추계종합학술대회 논문 초록집
• /
• pp.451-451
• /
• 2004

• Steel and Composite Structures
• /
• 제8권2호
• /
• pp.129-144
• /
• 2008

This paper demonstrates an application of the perturbation based stochastic finite element method (SFEM) for predicting the performance of structural systems made of composite sections with random material properties. The composite member consists of materials in contact each of which can surround a finite number of inclusions. The perturbation based stochastic finite element analysis can provide probabilistic behavior of a structure, only the first two moments of random variables need to be known, and should therefore be suitable as an alternative to Monte Carlo simulation (MCS) for realizing structural analysis. A summary of stiffness matrix formulation of composite systems and perturbation based stochastic finite element dynamic analysis formulation of structural systems made of composite sections is given. Two numerical examples are presented to illustrate the method. During stochastic analysis, displacements and sectional forces of composite systems are obtained from perturbation and Monte Carlo methods by changing elastic modulus as random variable. The results imply that perturbation based SFEM method gives close results to MCS method and it can be used instead of MCS method, especially, if computational cost is taken into consideration.

• Journal of Welding and Joining
• /
• 제25권5호
• /
• pp.36-44
• /
• 2007

This paper is the first part of the study on the accuracy improvement of numerical analysis of steel welds. The aim of this paper is to raise the accuracy of thermal analysis results, such as the shape and size of the weld cross section and the hardness distribution in HAZ(Heat-Affected Zone). It is known that the factors affecting on the accuracy are thermal properties, metallurgical properties and welding heat source model. It was found that the arbitrary distributed heat source model should be used to predict practical weld cross section shape and size. Also, in order to improve the prediction accuracy of HAZ hardness distribution, it was essential to consider 2 CCT(Continuous Cooling Transformation) diagrams in calculating volume fraction of transformed phases. One is the peak temperature being around melting temperature. The other is the peak temperature being around metallurgical transformation temperature.

• 한국유기농업학회지
• /
• 제29권1호
• /
• pp.41-50
• /
• 2021

This paper analyzes the efficiency of social enterprises by analyzing bootstrapping data envelopment analysis. Unlike the definitive DEA model, we analyze the confidence intervals of efficiency estimates through the DEA model, which takes into account stochastic factors. Major analysis results are summarized as follows: First, the results of the bootstrapping DEA analysis of social enterprises estimated that the technical efficiency was 0.459 and the 95% confidence interval was 0.389 to 0.601. Second, the number of inefficient social enterprises with efficiency values of less than 0.5 was found to be 15 (55.56%) in technical efficiency, 5 (18.52%) in pure technical efficiency, and 8 (29.63%) in scale efficiency. It can be seen that a significant number of social enterprises are operating in an inefficient state. Third, looking at the returns of scale of social enterprises, 25 (67.57%) are currently in the increasing returns of scale, 10 (27.02%) are in the constant returns of scale, and 2 (5.41%) are in decreasing returns of scale. In other words, it can be seen that social enterprises are under-invested in terms of input factors.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.657-660
• /
• 2002

In this paper, a study on the residual stress of plate with longitudinal stiffeners is explained in terms of the welding sequences. In order to verify the results of numerical analysis, the hole drilling method (HDM) is performed, to measuring the residual stresses of the test plates in $CO_2$ Flux Cored Arc Welding (FCAW) under various welding conditions. The non-linear transient analysis technique for the numerical analysis in a large and complicate structure is considered. The residual stress of plate in consideration of the welding sequences and directions is evaluated by some numerical simulations and also by experiments. Comparison of numerical analysis results with experimental data shows the accuracy and validity of the proposed method.