• Korean Journal of Heritage: History & Science
• /
• v.34
• /
• pp.80-101
• /
• 2001

This article is concentrated on the organization for labor exchange in producing hemp cloth at Geumso-ri, Imha-myoun, Andong city. The organization is called "Sam-dool-ge", and it is different from the organization for labor exchange in producing rice because it is managed by women mostly. ln harvesting hemp, same amount of labor and expenses are invested. Especially, labor is supplied in equal condition. In spinning hemp cloth, the work is shared on the basis of same tech level. In threading the warp and fastening hemp cloth. the work conducted collaborately under the best engineer's direction. "Sam-dool-ge", a gil-sam labor exchange, also presents cultural creativity which produces and inherits the folkloric tradition, and also has the quality as a rite of passage. Nowadays, producing hem cloth is for pursuiting of profits than for making clothes as it used to be. This tradition will be lasted at least for a while because some young generations are beginning to participate in and old generation is teaching them good.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2023.07a
• /
• pp.733-734
• /
• 2023

코로나 펜데믹 이후 다시 대면활동이 활성화되고 있지만 이미 학습한 비대면 활동은 10대들의 대안적인 활동, 소통, 협업의 공간으로 메타버스가 주목을 받으며 초,중 대학에 이르는 교육영역에 대한 논의와 연구가 활발해지고 있다. 특히 고가의 장비나 사용하기 위험한 교육 교보재를 메타버스 공간에 같이 공유하여 오프라인에서 쉽게 접할 수 없는 확장된 사용자 경험을 제공하기 위한 니즈가 있다. 이에 교육 공간으로서의 메타버스 활용을 뛰어넘어 고가 및 위험성이 있는 제한된 교육경험을 제공할 수 있어야 한다.

• Convergence Security Journal
• /
• v.16 no.5
• /
• pp.57-63
• /
• 2016

In recent years, there is growing interest in 'Fin-tech' in the domestic and international financial sector. And a variety of services in such a situation has emerged. To ensure the safety of from hacking attacks, many new technologies have been developed. These leading technology is the Bio-authentication method that you consider applying to the financial sector. Bio authentication is using biometric information. Also it is known that can cope the threat of fabrication and modifying attacks with shared and stored. However, Recently, When you look at hacking incidents of biometric data(560 million cases) in the United States Office of Personnel Management and advent of the fingerprints counterfeit technology, We can be known that should be reconsidered about the safety of bio-certification. Especially, it should be provided with a response measures for the problem of embezzlement that biometric information already been leaked. Thereby In this paper, by investigating biometric technologies and practices applied and of the vulnerability factor in many industries, it expected to be utilized in the prepared threats countermeasures in accordance with the application of the biometric authentication technology in a future.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.7
• /
• pp.903-909
• /
• 2004

The variability of mtDNA hypervariable segment I (HVS I) sequences was investigated in a total of 48 birds belonging to 12 Chinese native chicken breeds. Sixteen haplotypes were identified from 35 polymorphic nucleotide sites which accounted for 6.4% of a sequenced 544 bp fragment. Diversity analysis of the haplotypes showed that Tibetan, Langshan and Henan cockfight chicken had only one haplotype, while ancient haplotypes existed in Taihe silky and Chahua chicken. Phylogenetic analysis of the haplotypes suggested that Chinese native chicken breeds shared 5 maternal lineages and some breeds would share the same maternal lineage, regardless of their external features and ecological types. Both divergent and phylogenetic analysis of the haplotypes indicated the close genetic relationships between the Chinese native chicken breeds and G. g. gallus and G. g. spadiceus from different areas, which implied that G. g. gallus and G. g. spadiceus were the original ancestors of the Chinese native chicken breeds.

• Journal of the Health Care and Life Science
• /
• v.8 no.2
• /
• pp.127-133
• /
• 2020

While only the experts could create the contents in the existing VR contents business, in the proposed "Untact Social VR Video-Based Tour Scheduling", the GUI (Graphic User Interface) allows anyone to easily and quickly share the information taken through VR camera after creating. It is intended to serve as a variety of SNS-based media by developing a structure that can be shared in html format after creating with the GUI menus. In particular, it is applied to companies that operate the SNS-type publicity projects including experience facilities and viewing facilities, and the various SNS-type publicity businesses that create the VR contents. Communication is clear compared to the existing homepage-based information delivery method, and It aims to provide universality that anyone can easily edit in an environment where only experts can edit VR video contents of.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.45 no.5
• /
• pp.804-824
• /
• 2021

This study qualitatively explored the case of users utilizing multiple accounts on one social network service to create their own multiple spaces and different personas. The purpose of the study was to understand the behavior of people who use multiple accounts to express their identity online using Carl Jung's personality theory. We used in-depth interviews and the Zaltman metaphor elicitation technique (ZMET), targeting 19 people in their 20s and 30s who use more than one personal account on Instagram. Creating a shared consensus map using the configuration concept of ZMET derived six personas in relation to Instagram accounts. The motivations for the respondents' self-presentation associated with their personas and self-presentation types shown on Instagram were analyzed in terms of persona and fashion and subdivided into five dimensions: relationship management strategic presentation, self-monitoring presentation, competence demonstration presentation, anonymous presentation, and persona-centered presentation. Each respondent's persona and self-presentation formed by the Instagram account was analyzed.

• Research in Mathematical Education
• /
• v.26 no.2
• /
• pp.45-61
• /
• 2023

Number talks as a brief instructional routine benefits students and teachers. In general, the routines consist of four steps- introducing, posing questions, collecting answers, sharing ideas. This paper focuses on the sharing ideas step in which multiple strategies are shared by students because teachers sometimes do not know what to do with these multiple ideas. One way is to support students to engage in comparison given that teachers are expected to support students to compare strategies in number talks. This paper explores whether and how 15 prospective teachers supported students in their practicum classroom to compare different strategies in their enacted number talk. In this paper, 15 videos of number talks enacted by the prospective teachers were collected. Analyzing the videos produced multiple episodes in relation to comparing strategies, including 1) where prospective teachers created pre-conditions for comparison, 2) where they invited students for comparison, 3) where they pressed students to compare, and 4) where they offered their own way to compare. There were two patterns that might limit the potential of having multiple strategies as conditions for comparison. Additionally, this paper found that even though the prospective teachers missed opportunities to support students to compare different strategies, there were two ways for teachers to support students to engage in comparison. These findings can be used for mathematics teacher educators to support prospective teachers.

• Journal of the Korean Geosynthetics Society
• /
• v.22 no.1
• /
• pp.39-51
• /
• 2023

The bearing capacity of the prebored pile has been studied by many researchers. However, The bearing capacity of the prebored pile has been studied by many researchers. However, comparative studies between design data and pile load test data on the load sharing ratio and the settlement were insignificant. Therefore, the design data and the static load test results were compared for the prebored open-end steel piles. In the compressive static pile load test, the load sharing ratios of the base resistance and the shaft resistance were 13%~40% and 60%~87%, respectively and the settlements were measured 2.2mm~4.7mm. In the current bearing capacity calculation formula, the base resistance was shared between 54% and 75%, and the shaft resistance was shared between 25% and 46% and the settlements were calculated about 19.8mm~23.6mm. The settlement in the current bearing capacity calculation formula was 321% to 776% (average : 445%) larger than the settlement in the result of load test. When the settlement were calculated using the load sharing ratio in the pile load tests, it was 137% to 525% larger than the test settlement, and it was as large as 204% on average. It was confirmed that an appropriate evaluation of the load sharing ratio had an important effect on the calculation of pile settlement.

• Journal of Venture Innovation
• /
• v.5 no.1
• /
• pp.107-127
• /
• 2022

Global challenges such as the corona pandemic, climate change and the war-on-tech ensure that the demand who the technologies of the future develops and monitors prominently for will be on the agenda. Development of, and applications in, agrifood, biotech, high-tech, medtech, quantum, AI and photonics are the basis of the future earning capacity of the Netherlands and contribute to solving societal challenges, close to home and worldwide. To be like the Netherlands and Europe a strategic position in the to obtain knowledge and innovation chain, and with it our autonomy in relation to from China and the United States insurance, clear choices are needed. Brainport Eindhoven: Building on Philips' knowledge base, there is create an innovative ecosystem where more than 7,000 companies in the High-tech Systems & Materials (HTSM) collaborate on new technologies, future earning potential and international value chains. Nearly 20,000 private R&D employees work in 5 regional high-end campuses and for companies such as ASML, NXP, DAF, Prodrive Technologies, Lightyear and many others. Brainport Eindhoven has a internationally leading position in the field of system engineering, semicon, micro and nanoelectronics, AI, integrated photonics and additive manufacturing. What is being developed in Brainport leads to the growth of the manufacturing industry far beyond the region thanks to chain cooperation between large companies and SMEs. South-Holland: The South Holland ecosystem includes companies as KPN, Shell, DSM and Janssen Pharmaceutical, large and innovative SMEs and leading educational and knowledge institutions that have more than Invest €3.3 billion in R&D. Bearing Cores are formed by the top campuses of Leiden and Delft, good for more than 40,000 innovative jobs, the port-industrial complex (logistics & energy), the manufacturing industry cluster on maritime and aerospace and the horticultural cluster in the Westland. South Holland trains thematically key technologies such as biotech, quantum technology and AI. Twente: The green, technological top region of Twente has a long tradition of collaboration in triple helix bandage. Technological innovations from Twente offer worldwide solutions for the large social issues. Work is in progress to key technologies such as AI, photonics, robotics and nanotechnology. New technology is applied in sectors such as medtech, the manufacturing industry, agriculture and circular value chains, such as textiles and construction. Being for Twente start-ups and SMEs of great importance to the jobs of tomorrow. Connect these companies technology from Twente with knowledge regions and OEMs, at home and abroad. Wageningen in FoodValley: Wageningen Campus is a global agri-food magnet for startups and corporates by the national accelerator StartLife and student incubator StartHub. FoodvalleyNL also connects with an ambitious 2030 programme, the versatile ecosystem regional, national and international - including through the WEF European food innovation hub. The campus offers guests and the 3,000 private R&D put in an interesting programming science, innovation and social dialogue around the challenges in agro production, food processing, biobased/circular, climate and biodiversity. The Netherlands succeeded in industrializing in logistics countries, but it is striving for sustainable growth by creating an innovative ecosystem through a regional industry-academic research model. In particular, the Brainport Cluster, centered on the high-tech industry, pursues regional innovation and is opening a new horizon for existing industry-academic models. Brainport is a state-of-the-art forward base that leads the innovation ecosystem of Dutch manufacturing. The history of ports in the Netherlands is transforming from a logistics-oriented port symbolized by Rotterdam into a "port of digital knowledge" centered on Brainport. On the basis of this, it can be seen that the industry-academic cluster model linking the central government's vision to create an innovative ecosystem and the specialized industry in the region serves as the biggest stepping stone. The Netherlands' innovation policy is expected to be more faithful to its role as Europe's "digital gateway" through regional development centered on the innovation cluster ecosystem and investment in job creation and new industries.

• Spatial Information Research
• /
• v.18 no.2
• /
• pp.77-88
• /
• 2010

It is possible to evaluate hi-tech spatial services such as U-City services as part of the visible results from more than 10 years of public efforts and budgets on Korea National Digitalization. The U-City services are mainly based on ICT(Information and Communication Technology), but in the aspect of giving intelligence to the existing physical space, in principle, they are to be inter-connected with both spatial information and spatial plan. But, still there are few shared concepts for linking U-City services with spatial information and spatial plan. Therefore, under the proposition of the realization of Ubiquitous National Territory in the Digital Convergence Era, the purpose of the current study is to facilitate the balanced development among U-City services, national spatial data and spatial plan by proposing a new concept of Digital Convergence Space. Then, for its realization, regarding laws and policy arrangements are suggested.