• Proceedings of the Korean Institute of Building Construction Conference
• /
• v.y2004m10
• /
• pp.77-81
• /
• 2004

The massive structures are not free to move with vibration, differential settlement, thermal stresses because, construction and expansion joint, crack etc., can be large enough to cause leakage as deformation of waterproofing. It has been depended on the test method of tensile/tear strength which is waterproofing performance as behavior of concrete structure crack. However, not to practically confirm the creep applied to concrete surface, even waterproofing membrane have more performance than definite strength and elasticity. Therefore, in this study will focus on the test method to consider a resistance performance about loose adhesion and deformation of waterproofing and behavior of concrete structure as construction/expansion joint, crack. Performance test method on the influence as behavior of concrete structure crack is to choose waterproofing materials and construction method which possible to confront with behavior of 50mm crack in the atmosphere and low temperature. Examine the deformation of waterproofing membrane and loose adhesion which can occur to structure in general job site, suggest standard testing method to analyze correlation waterproofing membrane and structure with 5-types of materials used in this study, such as Adhesion membrane and sheet complex, sheet and urethane complex, self-adhesive sheet, spray poly-urea, spray membrane of rubberized Asphalt.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.46 no.6
• /
• pp.26-33
• /
• 2014

Frankincense resin was applied to Hanji to improve its physical properties. The resin-treated paper showed the increasement of physical properties such as weight, thickness, and density. The highest increasement in weight and density of resin-treated paper were found at 30% treatment concentrations and the largest values of density were $41g/m^2$ Hanji. With the increasement of concentration, the brightness was decreased and transparency was improved. Of the mechanical properties of the paper, the tensile index and burst index showed the improved values. The tear index, however, was decreased. The frankincense resin showed the highest result in the tensile index of resin-treated paper and the basis weight of $41g/m^2$ Hanji. The air resistance of the resin-treated paper got improved with the increase of the concentration and $105g/m^2$ Hanji showed the highest values. The highest improvement in air resistance may make the resin-treated Hanji possible to use for semipermeable materials.

• Elastomers and Composites
• /
• v.38 no.2
• /
• pp.122-127
• /
• 2003

Compounding, using such thermoplastic elastomer as styrene-ethylene-butadiene-styrene (SEBS) blended with polypropylene(PP), oil, and other ingredients, was studied to develop a new material with excellent impact resistance and resilience for the replacement of environmentally toxic PVC sheet. Hardness decreased linearly with oil content in the SEBS/oil blend, and the tensile strength increased with PP content whereas elongation showed no effects over 50 phr of PP in SEBS/oil/PP blend. In the practical SEBS composition, proposed to replace the PVC sheet material, tensile and tear strength, as well as hardness, increased proportionally with PP content, while melt index decreased.

• Elastomers and Composites
• /
• v.55 no.1
• /
• pp.13-19
• /
• 2020

4,4'-Methylenebis(2-chlorobenzenamine) (MOCA)-free fast curing polyurethanes were prepared. In this study, the processibility of a fast curing polyurethane system was characterized by assessing the pot life. The obtained pot life of the polyurethane was 6-8 s, indicating that this prepolymer-curative system is appropriate for ribbon flow casting. The influence of the NCO index on the viscosity and mechanical properties was evaluated. The viscosity, tensile strength, tear strength, and hardness of the as-prepared polyurethanes showed an increasing trend, with an increase in the NCO index, whereas the elongation at break increased initially and then decreased with an increase in the NCO index. The gel fraction and crosslink density showed a direct correlation with the NCO index, which substantiated the improved mechanical properties at the higher NCO index. The coefficients of friction and abrasion deteriorated with an increase in the NCO index.

• Elastomers and Composites
• /
• v.40 no.2
• /
• pp.128-135
• /
• 2005

Optimal conditions for preparation of starch/PVA blends were investigated with the consideration of factors that may influence mechanical properties of the blends. $L_{27}(3^{13})$ experimental designs based on Taguchi method were performed and then tensile strength, strain at break, Young's modulus and tear strength of films of the blends were measured to determine the optimal conditions for preparation. Interaction effects for each factor were determined from analysis of variables. Results of $L_{27}(3^{13})$ experiments indicated that glycerol and urea were important process factors affecting optimization of the mechanical properties.

• Elastomers and Composites
• /
• v.41 no.1
• /
• pp.3-9
• /
• 2006

Optimal conditions for preparation of starch/PVA blends were investigated with the consideration of factors that may influence mechanical properties of the blends. Multiplex mixture optimal method as a statistical method were performed and then tensile strength, strain at break, Young's modulus and tear strength of films of the blends were measured to determine the optimal conditions for preparation. The mechanical properties needed for the degradable agricultural mulch were the target of this experiment. Results showed that although the strain at break was a little insufficient, the other properties were very close to the target. This means that the mechanical properties of the film from this blend as a whole are very compatible with those of the reference mulch.

• Textile Coloration and Finishing
• /
• v.30 no.4
• /
• pp.321-328
• /
• 2018

Wet polyurethane resin was synthesized by using polytrimethylene ether glycol prepared from 1,3-propanediol produced by fermentation from corn sugar as bio polyol and polyether-polyol(PTMG). Physical properties and cell characteristics by wet coagulation were investigated using the synthesized wet polyurethane resin. The tensile strength of wet polyurethane resin decreased with increasing content of bio polyol as copolymer polyol, but it tended to increase elongation at break and tear strength. As a result of thermal characteristic analysis, it was found that the glass transition temperature was slightly increased as the content of bio polyol increased. As a result of comparing the cell characteristics by the wet coagulation method, it was found that the shape of the cell was good when the ether polyol and the bio polyol were used alone.

• Textile Coloration and Finishing
• /
• v.35 no.3
• /
• pp.151-158
• /
• 2023

In this study, we investigated the durability properties of the recycled leather using shaving scrap with antioxidant. Recycled leather sheets were manufactured by mixing shaving scrap and NB latex as a binder. HALS(Hindered Amine Light Stabilizer) and UVA(UV absorbers) were used as antioxidant. Mechanical properties such as hardness, tensile strength, elongation, tear strength and abrasion resistance were measured. Light aging resistance was evaluated using UV lamp and the degree of discoloration of the recycled leather sheets using a gray scale. In addition, to evaluate heat aging and UV aging, the degree of discoloration of the recycled leather sheets over time was measured using colorimeter. Washing fastness was evaluated on the degree of dyeing of recycled leather sheets for six type of multi-fiber woven fabrics (Acetate, Cotton, Nylon-66, Polyester, Acryl, Wool). To determine whether hazardous substances were detected in recycled leather sheets, the contents of arylamine and Cr 6⁺ were evaluated. As a result, when used in combination with antioxidant, the heat aging and light aging of recycled leather were improved and hazardous substance were not detected.

• Clinics in Shoulder and Elbow
• /
• v.11 no.2
• /
• pp.77-81
• /
• 2008

The goal of rotator cuff repairs is to achieve high initial fixation strength, minimize gap formation, maintain mechanical stability under cyclic loading and optimize the biology of the tendon-bone interface until the cuff heals biologically to the bone. Single row repairs are least successful in restoring the footprint of the rotator cuff and are most susceptible to gap formation. Double row repairs have an improved load to failure and minimal gap formation. Transosseous equivalent repairs (suture bridge technique) have the highest ultimate load and resistance to shear and rotational forces and the lowest gap formation. Even though the superior advantages of double row and transosseous equivalent repairs, those techniques take longer surgical time and are more expensive than single row repairs. Therefore single row repairs can be useful in bursal side partial thickness or small size full thickess rotator cuff tear.

• Journal of the Korean Society of Physical Medicine
• /
• v.13 no.3
• /
• pp.49-60
• /
• 2018

PURPOSE: This study was conducted to investigate the intervention effect obtained by applying an ICF tool to improve the dressing in a patient with rotator cuff syndrome to schematize the problems and approaching with PNF to solve the problems. METHODS: The subject of this study was a 44-year-old patient who underwent surgery after complete right rotator cuff tear. To treat his symptoms, the processes of clinical practice were implemented in the order of examination, assessment, diagnosis, prognosis, intervention, and outcome. During examination, patient information was collected using the ICF core set. In the assessment, the problems were schematized, and an ICF assessment sheet was used to identify the interaction of the problems. The diagnosis was made by clearly describing the causal relationship derived from the assessment in ICF terms. To solve the problems, the intervention was given in the order of indirect, direct, and task based on the philosophy of PNF. To evaluate the outcome, the differences before and after the intervention were compared. Additionally, the comparison for the ICF qualifier is presented with the ICF evaluation display. RESULTS: The results of the study showed clinical advantages in shoulder strength, eccentric control, range of motion, scapular stability, and shoulder pain. Overall, our patient with rotator cuff syndrome showed improvement in dressing and undressing activity in response to the PNF strategy. CONCLUSION: Application of the PNF intervention strategy after complete rotator cuff tear would have a positive effect on patient upper extremity function.