• 한국재료학회지
• /
• 제16권2호
• /
• pp.75-79
• /
• 2006

The effect of ozone and/or ultrasound treatments on the efficiency of slurry removal in post sliced cleaning (PSC) of silicon ingot was studied. Efficiency of slurry removal was evaluated as functions of time, temperature and surfactant with DOE (Design of Experiment) method. Residual slurries were observed on the wafer surface in case of cleaning by ozone or ultrasound separately. However, a clean wafer surface was appeared when cleaned with ozone and ultrasound simultaneously. It has found that cleaning time was the main effect among temperature, time and surfactant. Elevated temperature, addition of surfactant and high ozone concentration helped to accelerate efficient removal of slurry. The improvement of removal efficiency seems to be related to the formation of more active OH radicals. The highly cleaned surface was achieved at 10 wt% ozone, 1 min and 10 vol% surfactant with ultrasound. Application of ozone and ultrasound might be a useful method for PSC process in wafer cleaning.

• Journal of Advanced Marine Engineering and Technology
• /
• 제39권4호
• /
• pp.468-472
• /
• 2015

최근 대두되는 선박배기가스 저감 등의 환경정책으로 인하여 에너지의 효율적 이용에 관심이 증가하고 있다. 본 논문에서는 함정의 에너지 효율 향상을 위하여 사용 부하에 따라 해수펌프를 제어하는 고효율 해수냉각시스템을 제안한다. 본 논문에서는 제안하는 시스템의 효과를 알아보기 위하여 추진 디젤기관의 냉각시스템을 모델링 하고 함정 운항특성을 고려한 시뮬레이션을 수행하였다. 시뮬레이션 결과 제안한 고효율 해수냉각시스템이 기존 해수냉각시스템에 비하여 약 53%의 에너지 절감효과가 있었다. 본 연구 결과는 향후 함정 추진 디젤기관의 해수냉각시스템의 성능 향상에 유용한 자료로 활용될 수 있다.

• Journal of Electrical Engineering and Technology
• /
• 제8권6호
• /
• pp.1424-1430
• /
• 2013

This paper presents design procedure of the magnetic bearings used for high-speed electric machines and flywheel energy storage systems. Magnetic bearing can be categorized by inner-rotor type and outer-rotor type according to the position of the rotary disc. These two types are applicable based on application environments such as application space, required attraction force, and controllability. Magnetic bearing is generally designed based on the ratio (geometrical coefficient or geometrical efficiency) of pole width to rotor journal radius but proper ratio is only decided by the analysis. This is the difficulty of the magnetic bearing design. In this paper, proper design technology of the inner-rotor type and outer-rotor-type eight pole magnetic bearings is introduced and compared with the FEM analysis results, which verifies the proposed design procedure is suitable to be applied to the design of the magnetic bearings for the industrial applications and flywheel energy storage system.

• 한국세라믹학회지
• /
• 제50권6호
• /
• pp.454-459
• /
• 2013

Recently, remote phosphors have been reported for application to white LEDs to provide enhanced phosphor efficiency compared with conventional phosphor-based white LEDs. In this study, a remote phosphor was produced by coating via screen printing on a glass substrate with different numbers of phosphor coating. The paste consists of phosphor, lowest softening glass frits, and organic binders. The remote phosphor could be well controlled by varying the phosphor content rated paste. After mounting the remote phosphor on top of a blue LED chip, CCT, CRI, and luminance efficiency were measured and values of 5300 K, 62, and 117 lm/W were respectively obtained in the 80 wt% phosphor with 3 coating layers sintered at $800^{\circ}C$.

• 한국콘텐츠학회논문지
• /
• 제9권9호
• /
• pp.218-225
• /
• 2009

본 연구는 세무조사자들이 세무행정업무수행과정에서 인식하는 집단응집성과 상사에 대한 신뢰가 팀몰입과 역할내행동에 영향을 미치는지를 실증적으로 분석하였다. 분석결과, 세무조사자들의 집단응집성과 상사에 대한 신뢰가 높을수록 팀몰입이 높아지며, 팀몰입 높을수록 역할내행동이 높아져 세무조사업무의 효율성을 높일 수 있고 납세자들의 세무서비스만족도를 높이는데 효과가 있음을 확인할 수 있었다. 따라서 세무조직관리자들은 조직의 효율성을 높이고, 팀성과를 높이기 위해서는 팀의 주어진 목표를 달성하기 위한 확고한 목표설정과 상황에 맞는 전략개발 그리고 선수들의 성과에 대한 보상이 이루어져야 하며, 세무조사자들의 근무의욕을 높이기 위한 조직 인사 근무형태 보수 후생복지 등 모든 분야에서 유기적인 개선이 이루어져야 할 것이다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.555-557
• /
• 2004

We report the effect of the particle size (D50) and PSD (Particle Size Distribution) of glass frit on the transparency of transparent dielectric layer of PDP. The milling efficiency of wet milling with water was the best among the dry milling, wet milling with IPA and wet milling with water. The transparency increased with the reduction of particle size of glass frit as the milling time increased. Also the transparency changed by the PSD of glass frit. Glass frits of broad PSD showed high transparency compared with the glass frits of sharp PSD.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1997년도 춘계학술대회
• /
• pp.235-238
• /
• 1997

The Graphical User Interface (GUI) software is developed for 0.3 Tesla Permanent Magnet Resonance Imaging (MRI) system and the state of art of designing GUI system is discussed in this paper. The Object-Oriented concepts are applied for designing GUI software utilizing Interbase ODBC Database layer. Also, Multimedia concepts such as voice, sound and music are integrated in GUI system to enhance the efficiency of MRI operation.

• 한국레이저가공학회:학술대회논문집
• /
• 한국레이저가공학회 2005년도 추계학술발표대회 논문집
• /
• pp.7-10
• /
• 2005

Nowadays, most automotives companies are making use of laser welding in car body assembly shop. But even though laser welding is better than resistance spot welding in many points, its application has been limited to special technology for manufacturing. The paper introduces in the field of remote welding system(RWS) to improve the process efficiency of laser welding. Positioning time of RWS between welding stitches are dramatically reduced to zero. It is a kind of solutions to generalize laser welding in mass production.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.229-230
• /
• 2009

This paper proposes a new design of ultra-slim color mixing lens (CML) for backlight unit (BLU), and presents simulated performance of the design. The novel color mixing structure has a shorter mixing length (< 1cm) than the existing color mixing structure, and achieves high efficiency and uniformity.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2005년도 하계학술발표대회
• /
• pp.203-203
• /
• 2005