• Korean Journal of Weed Science
• /
• v.31 no.3
• /
• pp.294-307
• /
• 2011

This experiment carried out to confirm characteristics of macrogranule (GG) for herbicidal efficacy by using remote-controlled aerial application (RCAA) to control annual and perennial weeds in rice paddy field, application methods, and application times of formulation types. Particle of 500 g GG having average diameter of 2.5~3 mm was over 85 percent, the bulk density of the particle was $0.2\sim0.4g\;mL^{-1}$ and the particle was water floating granule. Active ingredients and external form of halosulfuronmethyl+mefenacet GG remained stable under condition of storage stability test. The disintegration time of the GG was faster as the water temperature was increased. But disintegration time was not affected by pH on the water conditions. By using hand, spoon and power applicator, drift distances of GG were 4~5m, 7 m and 10~12 m, respectively. GG showed good herbicidal efficacy and plant safety in all of the application methods such as, using hand, spoon, power applicator and RCAA. Application times of GG, GR, SC and TB by hand in $4,000m^2$ were 38 min. 4 sec, 42 min. 20 sec, 38 min. 10 sec and 21 min. 4 sec, respectively, but application time of GG by using RCAA was 1 min 32 sec. According to appearance and characteristics of formulation types, suspension concentrate (SC) and GG were possible formulation types for RCAA.

• Korean Journal of Clinical Laboratory Science
• /
• v.53 no.3
• /
• pp.225-232
• /
• 2021

This study sought to investigate the distribution, antimicrobial resistance rate, and bacterial co-infection frequency of non-tuberculous mycobacteria (NTM) in a single center in Incheon, South Korea. A total of 8,258 specimens submitted for tuberculosis (TB)/NTM real-time PCR tests during the years 2015 to 2020 were retrospectively reviewed. In total, 296 specimens (3.6%) were NTM positive, and the positivity increased from 2.5% (30/1,209) in 2015 to 3.8% (66/1,740) in 2020. Of 296 NTM specimens, 54.7% (162/296) were identified as the Mycobacterium avium complex (MAC) followed by the Mycobacterium abscessus complex (MABC) 20.9% (62/296), M. fortuitum 6.4% (19/296) and M. flavescens 3.4% (10/296). Of the NTM-positive specimens, 76.7% (227/296) were tested for drug resistance. The results showed multidrug-resistant NTM in 40.1% (91/227) and extensively drug-resistant NTM in 59.9% (136/227) of these specimens. Of the 145 isolates taken for bacterial culture, bacteria/fungi co-infection with NTM accounted for 43.4% (63/145), in which the most common bacterial species was Klebsiella pneumonia (23.8%, 15/63). This study is the first report on the distribution and antimicrobial resistance of NTM in Incheon. As the proportion of NTM infections increases, active treatment and thorough infection control are required for effective management.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2003.06a
• /
• pp.220-221
• /
• 2003

Equiatomic FePt and CoPt alloy thin films have received considerable attention as possible magnetic and magneto-optic recording because of their high magnetic anisotropy energy and high coercivity. The high coercivity in these thin films is due to the presence of finely dispersed ordered FePt phase mixed with disordered FePt phase. However, a high temperature treatment, either substrate heating during deposition or post annealing, is needed to obtain the ordered L1$\_$0/ phase with high value of magneto crystalline anisotropy. Recent microstructural studies on these films suggest that the average grain size ranges from 10-50 nm and the grains are magnetically coupled between each other. On the other hand, the ultrahigh-density magnetic recording media with low media noise imposes the need of a material, which consists of magnetically isolated grains with size below 10 nm. The magnetic grain isolation can be controlled by the amount of additional non-magnetic element in the system which determines the interparticle separation and therefore the interparticle interactions. Recently, much research work has been done on various non-magnetic matrices. Preliminary studies showed that the samples prepared in B$_2$O$_3$ and Carbon matrices have shown strong perpendicular anisotropy and fine grain size down to 4nm, which suggest these nanocomposite films are very promising and may lead to the realization of a magnetic medium capable of recording densities beyond 1 Tb/in$^2$. So, in this work, the effect of Carbon doping on the magnetic properties of FePt nanoparticles were investigated.

• Journal of Welding and Joining
• /
• v.31 no.2
• /
• pp.16-20
• /
• 2013

Titanium and its alloys have been widely using in the various field of industry application due to high corrosion resistant properties and mechanical properties. Titanium is highly reactive in the high temperature state and the formation of titanium oxide and porosities in the nuggets of fusion welding will results in the degradation of the mechanical properties. For this reason the studies of friction stir welding for titanium have been investigated recently. The FSW zones of titanium were classified by the weld nugget (WN), the linear transition boundary (TB) and the heat affected zone (HAZ). The WN along with titanium parent was characterized by the presence of twins and dislocations. The average grain size and hardness of WN has been changed according to heat input. The grain refinement resulted from the FSW increased the hardness in the stir zone. Sound dissimilar joints between SUS 304 and CP-Ti were achieved using an advancing speed of 50 mm/min and rotation speeds in the range of 700-1100 rpm. Aluminum 1060 and titanium alloy Ti-6Al-4V plates were lap joined by friction stir welding, hence the ultimate tensile shear strength of joint reached 100% of Al 1060. Mg alloy and Ti were successfully butt joined by inserting a probe into the Mg alloy plate with slightly offsetting. But Ti-Al intermetallic compound layers formed at the interface of these joints.

• Journal of Aerospace System Engineering
• /
• v.16 no.3
• /
• pp.35-41
• /
• 2022

UAM (Urban Air Mobility) is a new safe, secure, and more sustainable air transportation system for passengers and cargo in urban environments. Commercial operations of UAM are expected to start in 2025. Since production rates of UAM are expected to be closer to cars than conventional aircraft, the airworthiness methodology for UAM must be prepared for mass production. Composite materials are expected to be mainly used for UAM structures to reduce weight. In this paper, the composite material qualification method was derived and the materials were applied for small aircraft application. It is expected to reduce the airworthiness certification time by applying composite material qualification system and its database.

• The Korean Journal of Quaternary Research
• /
• v.16 no.1
• /
• pp.1-16
• /
• 2002

A total of 4 muddy sediment samples collected from the Central Yellow Sea were analyzed for chemical composition. The results are compared with the previously published Huanghe, Changjiang and Keum River geochemical data in order to understand provenance and sedimentation of fine-grained mud, and the sediment accumulation rates estimated. The sandy sediment facies is distributed in the eastern area, a patch of fine-grained mud exists in the western central prat, and the sandy mud and clay sedimentary facies shot. north to south zonal distribution in the central region. The content of calcium carbonate ranges from 2.8 to 10.5%, and its distributional trends to be more concentrated on the western muddy sediments near toward the China side rather than on the eastern sandy sediments. The accumulation rates obtained using Pb-210 geochronologies for the muddy sediments in the Central Yellow Sea showed ranges from 0.21 to 0.68 cm/yr or 0.176 to 0.714 g/$\textrm{cm}^2$. yr. The sedimentation rate from core CY96010 located in the eastern near side of Shandong Peninsula which is affected by the Huanghe River shows 0.68 cm/yr or 0.714 g/$\textrm{cm}^2$ . yr. The sediment cores CY96008 and CY96002 in the Central Yellow Sea, the estimated of sediment accumulation rates shows 0.21~0.23cm1yr or 0.176~0.220 9/$\textrm{cm}^2$.Vr respectively, which are much lower than above samples. These indicate that the muddy sediments in central area of the Yellow Sea may have received influence of the sediment discharge from the Huanghe River. The concentrations of Ca, Na, Sr, Ho, La, Tb, Ta and Ca/Ti ratio of the muddy sediments in the Central Yellow Sea are higher than those of the Changjiang sediments and lower than those of the Huanghe sediments. However, these element values showed similar concentration patterns than those of the Huanghe sediment. The element contents such as Fe, Ti, Nl, Co, Cr, Cu, Pb, Sc, Ce, Nd, Sm, Eu, Cd and Dy in the study area are higher than those of the Huanghe sediments and lower than the Changjiang River sediments, but these values showed close to resemblance content trends those of the Changjiang sediment. The concentration of Mn, K and Sr in sediments of the study area are similar to those of the Keum River and eastern Yellow Sea sediment. They are rich in Zn, Rb, Cd, U, Cs and Li than those of the other comparison legions. Therefore, the terrigenous materials sources of the muddy sediment in the Central Yellow Sea comes mainly from Huanghe River in the past and present, and also have party derived from the Changjiang and Keum River, while the biological deposit in this area are carried by the Yellow Sea Warm Current.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.10 no.4
• /
• pp.378-384
• /
• 2005

Vanillin is one of the world's principal flavoring compounds, and is used extensively in the food industry. The potential vanillin production of the bacteria was compared to select and clone genes which were appropriate for highly productive vanillin production by E. coli. The fcs (feruloyl-CoA synthetase) and ech (enoyl-CoA hydratase/aldolase) genes cloned from Amycolatopsis sp. strain HR104 and Delftia acidovorans were introduced to pBAD24 vector with $P_{BAD}$ promoter and were named pDAHEF and pDDAEF, respectively. We observed 160 mg/L vanillin production with E. coli harboring pDAHEF, whereas 10 mg/L of vanillin was observed with pDAHEF. Vanillin production was optimized with E. coli harboring pDAHEF. Induction of the fcs and ech genes from pDAHEF was optimized with the addition of 13.3 mM arabinose at 18 h of culture, from which 450 mg/L of vanillin was produced. The feeding time and concentration of ferulic acid were also optimized by the supplementation of $0.2\%$ ferulic acid at 18 h of culture, from which 500 mg/L of vanillin was obtained. Under the above optimized condition of arabinose induction and ferulic acid supplementation, vanillin production was carried out with four different types of media, M9, LB, 2YT, and TB. The highest vanillin production, 580 mg/L, was obtained with LB medium, a 3.6 fold increase in comparison to the 160 mg/L obtained before the optimization of vanillin production.

• Journal of Life Science
• /
• v.10 no.3
• /
• pp.262-272
• /
• 2000

As a part of investigation for basic epidemiology of diarrheogenic disease, we attempted isolation of Escherichia coli from patients with diarrhea. Seven hundred and twenty-one strains of E. coli were isolated from 1,239 patients with diarrhea. Seasonal distribution of patient with diarrhea was shown the most high at August (18.2%). Age group distribution of patient was shown the most high at children (54.6%, 2 to 10 years old). The serotypes of 721 E. coli isolates were in order of serotype O44 (16.8%), O153 (8.6%), O1 (7.5%), O166(5.7%), O8 and O86a (4.7%), and O125 (4.6%). The supernates cultured 36 strains among 721 E. coli isolates were indicated cytotoxicity against monolayered Vero cells. All of the isolates were susceptible to amikacin. The isolates were resistant in order of novobiocin (99.0%), moxalactam (97.1%), carbenicillin (96.1%), tetracycline (90.4%), ampicillin (85.9%), gentamicin (84.0%), streptomycin (78.4%), cephalothin (46.6%) and polymyxin B (4.2%). In the antibiotic resistant patterns, 125 kinds of multiple resistance patterns of E. coli isolates were detected. The highest resistant pattern was ampicillin-carbenicillin-chloramphenicol-cephalothin-erythro-mycin- gentamicin-moxalactam-novobiocin-penicillin G-streptomycin-tobramycin-tetracycline-tri methoprim type (24.3%).

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.4
• /
• pp.506-515
• /
• 2015

In this study, the effect of Goheung pomegranate extract on postmenopausal syndrome was evaluated both in vitro and in vivo in ovariectomized Sprague-Dawly (SD) rats. Sixty female SD rats were divided into six groups: sham, sham operation and distilled water; OVX, ovariectomized and distilled water; PE1, ovariectomized and pomegranate concentrate (0.75 mL/twice/d); PE2, ovariectomized and pomegranate concentrate (1.5 mL/twice/d); PE3, ovariectomized and pomegranate concentrate (2.2 mL/twice/d); and CE, ovariectomized and commercial pomegranate concentrate (2.2 mL/twice/d). Percent bone volume (bone volume/tissue volume) and trabecular thickness (Tb.Th) improved in a dose-independent manner in PE1, 2, and 3. Especially, bone mineral density was significantly improved in PE3 (P<0.05) compared to OVX. Pomegranate extract reduced body weight and visceral fat mass. High density lipoprotein cholesterol (HDL-C) level slightly increased in a dose-independent manner in the experimental group. In addition, HDL-C/total cholesterol level of PE3 significantly increased (P<0.05) compared with OVX. These results show that pomegranate concentrate improved blood lipid levels and bone metabolism in ovariectomized rats. Therefore, Goheung pomegranate concentrates are expected to improve cardiovascular and bone-related diseases in menopausal women.

• Analytical Science and Technology
• /
• v.10 no.4
• /
• pp.282-290
• /
• 1997

The sorption and desorption properties of U(VI), Th(IV), Zr(IV), Cu(II), Pb(II), Ni(II), Zn(II), Cd(II) and Mn(II) ions on XAD-16-[4-(2-thiazolylazo)orcinol] (TAO) chelating resin were studied by elution method. The effect was examined with respect to overall capacity of each metal ion, separation of mixed metal ions, flow rate and concentration of buffer solution for optimum condition of sorption. The overall capacities of some metal ions on this chelating resin were 0.35nmol U(VI)/g resin, 0.49nmol Th(IV)/g resin, 0.41nmol Cu(II)/g resin, and 0.31nmol Zr(IV)/g resin, respectively. The elution order of metal ions obtained from breakthrough capacity and overall capacity at pH 5.0 was Th(IV)>Cu(II)>U(VI)>Zr(IV)>Pb(II)>Ni(II)>Zn(II)>Mn(II)>Cd(II). The group separation of mixed metal ions was possible by increasing pH in pH range 2~5 at a flow rate of 0.28mL/min. Characteristics of desorption were investigated with desorption agents such as $HNO_3$, HCl, $HClO_4$, $H_2SO_4$, and $Na_2CO_3$. It was found that 2M $HNO_3$ showed high desorption efficiency to most of metal ions except Zr(IV) ion. Also, desorption and recovery of Zr(IV) ion were successfully performed with 1M $H_2SO_4$. Recovery of trace amount of U(VI) ion from artificial sea water was over 94%. The chelating resin, XAD-16-TAO was successfully applied to group separation of rare earth metal ions from U(VI) by using 2M $HNO_3$ as an eluent.