• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.232-237
• /
• 2007

The deformation of polymers under high loading-rate conditions will be a governing factor to be considered in their impact-resistant applications such as protective shields and transparent armor. In this paper, the deformation and fracture behaviors of polymeric materials such as PE, PC and PEEK have been investigated by Taylor Impact tests. Taylor cylinder impact tests and high speed photography are introduced to examine the deformation behavior under dynamic loading condition. 20 mm air gun was used to perform the impact experiments. Cylindrical projectiles have been impacted onto a hardened steel anvil at a velocity ranging from 100 to $350\;ms^{-1}.$ Along the barrel line, a photo-sensor which measures the speed of the projectile, four digital cameras which has shutter speed of 1/917,000sec and a rigid anvil were set up. After impact experiments, the shapes of projectiles and images taken using high speed cameras were analysed. Depending on materials adopted, they showed a variety in deformation and fracture behaviors.

• 대한기계학회논문집A
• /
• 제40권9호
• /
• pp.791-799
• /
• 2016

최근 기계 시스템의 고속화가 진행됨에 따라 구조물 및 기계부품의 신뢰성 및 안전성 확보 측면에서, 충격하중하에서 구조용 재료의 동적변형거동에 대한 평가가 필요하다. 그러나 $10^4\;s^{-1}$를 넘는 고 변형률속도에서 실험적 기법을 사용한 구조용 재료의 변형거동의 파악은 용이하지 않은 실정이다. 본 연구에서는, 고 변형률속도역에서 금속재료의 동적변형거동을 조사하기 위해 Taylor 봉 충격시험을 실시하였다. 또한 고속영상촬영 시스템을 사용하여 Taylor 봉 충격시험 동안 변형거동을 관찰하였다. Taylor 봉 충격시, 경과시간에 따른 변형과정을 AUTODYN 상용 S/W를 사용한 수치해석을 수행하여 실험결과와 비교하여 고 변형률속도역에서 거동을 평가하였다.

• 대한기계학회논문집A
• /
• 제30권10호
• /
• pp.1235-1241
• /
• 2006

A new hydrocode which is still under development using Lagrangian, Eulerian and arbitrary Lagrangian-Eulerian operators, has been described. The three operators are implemented into a single framework by incorporating the sequential three stages of Lagrangian, remesh and remap stages. Several numerical schemes used for each operator are discussed briefly in this paper. In order to evaluate the characteristics of each operator, the Taylor Impact Test has been simulated using each operator and the results are compared. Currently the code is 1st order accuracy in the material interface tracking algorithm and can not handle multimaterial in the mixed cell. The areas of possible enhancement of the code are also discussed.

• Elastomers and Composites
• /
• 제53권4호
• /
• pp.207-212
• /
• 2018

Taylor rod impact tests have been the subject of many theoretical and experimental investigations. This paper discusses the numerical methods for simulating the Taylor impact test, which is widely used to obtain constitutive equations and failure conditions under high-velocity collisions of materials. With this in mind, a particle-based MPM (material point method) for linear viscoelastic solid materials was implemented, and MPM simulations for viscoelastic deformation behavior were numerically verified and confirmed by comparing the MPM and FEM results. In addition, this modeling and numerical approach could be extended to more complex viscoelastic models for basic understanding and to analyze the deformation and fracture behavior of more complicated viscoelastic material systems.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.198-203
• /
• 2008

In the present study, the deformation behavior of both of metal and polymer combination on impact was investigated. They have showed a different deformation behavior when the co-axially combined projectile was impacted on rigid target. The theory according to Taylor's simplified approach assumes an ideally rigid-plastic material model exhibiting rate-independent behavior and simple one-dimensional wave propagation concepts that neglect radial inertia. In the case of impact with polymeric materials, elastic strain in general are not negligible compared with plastic strain; and the rigid-plastic material behavior assumed by Taylor for metallic materials cannot be applied any more. Since, the sleeve and the core materials have widely different mechanical properties, they will produce a significant difference of mechanical impedance with each other. Therefore these impedance mismatch influences on the deformation behavior sleeved polymer projectile on impact. As a result, sleeved projectiles will generate a very interesting impact behavior. Therefore, the according to sleeved metal material and core polymer material can see expected. The objective of this study was to investigate the factors which influences on deformation behavior pattern of sleeve materials surface.

• 소성∙가공
• /
• 제30권1호
• /
• pp.16-21
• /
• 2021

A new concept of ammunition without the use of explosive gunpowder has been recently studied, which achieves performance equal to or higher than that of high explosives. Frangible Armor Piercing (FAP) is one of the concepts, which utilizes a tungsten alloy penetrator specialized for fragmentation. To investigate the fracture behavior of the tungsten alloy penetrator, Taylor impact tests were conducted at various impact velocities. Additionally, finite element analysis was performed to predict the fracture behavior of the tungsten alloy. Compression tests were also carried out at six strain rates for dynamic material properties and the dynamic hardening behavior was successfully predicted with the Lim-Huh model. Finally, the Mohr-Coulomb fracture model based on the mean stress was adopted to predict impact failure in Taylor impact simulation. The analysis predicts the deformation and fracture behaviors of the tungsten alloy successfully.

• International Journal of Computer Science & Network Security
• /
• 제23권1호
• /
• pp.78-88
• /
• 2023

Medication safety and medicine delivery challenge the well-being of the elderly and the management of the elderly center. With the outbreak of COVID-19, the elderly in the care center were challenged by the inconvenience of the medication restocking. The purpose of this paper accentuates the importance of the design and development of an UAV-based Smart Medicine Case (UAV-SMC) to improve the performance of medication management and medicine delivery in the elderly center. The researchers came up with the design of UAV-SMC in the light of the UAV and IoT technology to improve the performance of both Medication Practice Management (MPM) and Low Inventory Detection and Delivery (LIDD). Based on the result, with UAV-SMC, the performance of both MPM and LIDD was significantly improved. The UAV-SMC improves the efficacy of medication management in the elderly center by 26.97 to 149.83 seconds for each medication practice and 9.03 mins for each time of medicine delivery in Subang Jaya Malaysia. This paper only investigates the adoption of UAV-SMC in the content of elderly center rather than other industries. The authors consider integrating the UAV-SMC with the e-pharmacy system in the future. In conclusion, the UAV-SMC has significantly improved the medication management and guard the safety of elderly and caretaker in the elderly in the post-pandemic times.

• 한국군사과학기술학회지
• /
• 제14권3호
• /
• pp.532-537
• /
• 2011

This paper describes the development of SPH(Smooth Particle Hydrodynamics) scheme and integration into the multi-material shock physics code(ExLO) for the purpose of the application to the extreme large deformation problems. SPH numerical scheme has been extended into the fluid dynamics and the high-speed impact events, such as space structure protection against space debris and meteorite catering. Like other hydrocodes, SPH scheme also solves the conservation equations with the constitutive equation including equation of state. The benchmark problem, Taylor-Impact test, was simulated and the predictions show good agreements with both the published numerical data and experimental data. Currently, the contact treatment between materials is under development.

• The Journal of Asian Finance, Economics and Business
• /
• 제6권4호
• /
• pp.249-260
• /
• 2019

The study examines the impact of financial risk, convenience risk, non-delivery risk; return policy risk and product risk on online consumer behavior of Malaysian consumers. The research employed a self-administered survey to collect empirical data from 245 Malaysian online shoppers by using convenience sampling. Cronbach alpha was calculated to confirm the reliability of the data and then normality was assessed. Confirmatory Factor Analysis was then conducted to test the model using the goodness-of-fit tests. And finally, structural equation modeling is used to test the hypotheses and draw conclusions. IBM SPSS AMOS version 22.0 was utilized for data analysis. The research indicates that product risk, convenience risk, and return policy risk have a significant and positive impact on online shopping behavior. Financial risk is found to have insignificant and negative effects on consumer behavior. In addition, the non-delivery risk is found to have a significant and negative impact on online shopping behavior. The findings provide a useful model for measuring and managing perceived risk in online shopping which may result in an increase in participation of Malaysian consumers and reduce their cognitive deficiencies in the e-commerce environment. Several managerial implications are discussed along with the scope for future research.

• The Journal of Asian Finance, Economics and Business
• /
• 제4권4호
• /
• pp.39-49
• /
• 2017

Religious intolerance has become a common feature of many countries in recent times. Studies have revealed a worldwide increase in government regulations and social hostilities against religious beliefs and practices. The stifling impact of both government and society on the market for religion, warrants closer scrutiny. This study examines the relationship between government regulations and social hostilities towards religious beliefs and practices, for the period of 2001-2011 for a sample of 45 European countries. The Generalized Method of Moments dynamic panel estimation technique is employed to analyze the micro panel dataset of 45 European countries, to establish the possible relationships that may exist between these variables. The theoretical framework for this study is based on the Religious Economies Theory and the Supply Side Theory of Religion. The results of this study show evidence of the positive relationship between government regulations and social hostility. Interestingly, the study also revealed that the impact of social hostility on the level of government restrictions is smaller in magnitude compared to the reverse impact of government restrictions on social hostilities, indicating the dangerous role played by governments in inciting social hostilities, when they regulate or restrict religious beliefs and practices.