• Journal of the Korean earth science society
• /
• v.31 no.1
• /
• pp.88-94
• /
• 2010

A simple laboratory device and methodology are developed for deep understanding of the western boundary current (WBC). The apparatus consists of a rotating (count-clockwise) rectangular tank with a sloping bottom in order to simulate the beta effect, the variation of the Coriolis parameter with latitude. We also used a clockwise rotating disk at the surface water to mimic the wind stress forcing in mid-latitude oceans. Four experiments were carried out using some combination of a bottom type and a rotation of the tank. Experiment with the beta effect clearly demonstrated the WBClike flow as well as the Sverdrup interior. However, the water in a tank gave rise to an inertial motion under the influence of a constant Coriolis force alone. We also discussed a stiffening of the rotating fluid on the basis of the Taylor-Proudman effect. We believe that the apparatus and methods developed in this study help to understand the WBC due to the beta effect.

• The Journal of Korean society of community based occupational therapy
• /
• v.4 no.2
• /
• pp.63-73
• /
• 2014

Objective : The purpose of this study was to identify the effect of crafts and handwriting on bilateral coordination during task performance. Methods : Randomly selected 30 college students without hand disability were invited for the study, and grouped 3(test group 1 for crafts, test group 2 for handwriting, and control group) with 10 students per group respectively. Then Jebsen-taylor hand function test, Purdue pegboard test, and Minnesota manual dexterity test were employed for evaluating changes before and after the intervention. Results : After training intervention of crafts and handwriting for two test groups, test groups showed better bilateral coordination significantly than the control group. Especially test group 1(crafts) showed a bigger difference at Jebsen-taylor hand function test, and likely test group 2(handwriting) did at Purdue pegboard test. Conclusion : It was found that crafts increase bilateral coordination, while handwriting increase hand dexterity during task performance. That is, crafts and handwriting affect tasks differently. Further studies applying various crafts and handwriting for many age groups will be helpful for identifying the better way of occupational intervention for individuals in lack of bilateral coordination.

• Journal of Advanced Marine Engineering and Technology
• /
• v.27 no.3
• /
• pp.460-465
• /
• 2003

Microgravity experiments were conducted to determine the effect of liquid and gas superficial velocities on flow behaviors. Flow behaviors observed under microgravity conditions can be classified into five flow patterns: bubble. Taylor bubble, slug, semi-annular and annular flows. Transition boundary between four flow patterns could be determined by drift-flux model. It was also found that the effect of gravity and pipe inclination on flow pattern transition was not significant in the inertia dominant region.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.10a
• /
• pp.453-455
• /
• 2005

Ferritic STS 439 Steel sheet were deformed by hot rolling with and without lubricant. The effect of friction between roll and specimen on inhomogeneous texture was studied by means of EBSD, XRD texture analysis. The textures were compared with those of obtained by Taylor FEM simulation. High friction between roll and sheet gave rise to the formation of the inhomogeneous shear texture through thickness.

• International Area Studies Review
• /
• v.21 no.4
• /
• pp.65-83
• /
• 2017

As Global value chain(GVC) is deepening, the importance of intermediated good trade is growing in international trade issues. Such facts lead to much discussions about the relation between Global Outsourcing and pollution. This study analyzed the effect of Global outsourcing on Environment using the data including 21 industries for 2004-14. $CO_2$ intensity is used as a proxy for the environment variable and to measure Global outsourcing and I employed the method suggested by Feenstra and Hanson(1999), Amiti and Wei(2006). To examine the effect Global outsourcing on the Environment more precisely, this paper controlled the factors that can affect the environment level on the basis of the theory suggested by Copeland and Taylor(1994). In the methodology, System GMM is employed to solve endogenous problem. The results show that for overall industries, Global outsourcing effect cannot be identified and for polluting industries, the result is identical. However, Global outsourcing has a negative effect on the pollution level for China and developing countries. In other words, as Global outsourcing is increasing, the national pollution level is decreasing.

• Membrane Journal
• /
• v.13 no.2
• /
• pp.88-100
• /
• 2003

A change of filtrate flux in Taylor vortex flow filtration was investigated experimentally by rotating speed of inner cellulose ester membrane cylinder (average pore size: 1.2 ${\mu}m$), slurry concentration, and particle size. The filtrate flux was a direct proportion relation with TMP, but an inverse relation with resistances. A change of cake resistance with time was examined by rotating speed, slurry concentration, and particle size. Initial resistance increased dramatically as raising slurry concentration, and the pseudo-steady state was maintained at high resistance value. However, times to reach the pseudo-steady state did not depend on slurry concentration. The resistance was larger as smaller particle size, because possibility of pore blocking inside membrane could be higher and shear effect should be lower as smaller particle size. A model equation suggested in this study was composed of particle deposition and removal terms, and could confirm well experimental data using average values of experimental coefficients.

• Journal of the Korean GEO-environmental Society
• /
• v.9 no.3
• /
• pp.61-68
• /
• 2008

Side friction is often neglected in the analysis of the results of a consolidation test when the specimen has a high ratio of diameter to height. As the height of a specimen increases, however, side friction becomes important. This paper presents an investigation of the effect of side friction on consolidation test results for normally consolidated kaolinite slurry. Consolidation tests were performed to obtain settlement, pore pressure, compressibility, and hydraulic conductivity of kaolinite slurry. The compressibility relationship is corrected for side friction using a modified form of Taylor (1942) analytical solution. Numerical simulations using the CS2 piecewise-linear model are compared with settlement and excess pore pressure measurements. Experimental results show improved agreement with a modified CS2 model in which the effect of side friction is considered. The numerical and experimental results indicate that the side friction is an important factor affecting the rate of consolidation as well as the compressibility relationship for the specimen.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.4
• /
• pp.379-384
• /
• 2015

Electrospinning has recently been used for micropatterning. The electrospinning method as a patterning tool has the advantage of a rapid patterning speed because it is based on a continuous printing mode rather than a drop-on-demand mode. To obtain stable continuous printing, a high molecular weight polymer must be mixed with functional materials for patterning. In this paper, polyethylene oxide (PEO) was used. The effect of polymer on viscosity and formation of a Taylor cone jet from the electrospinning nozzle was investigated. Finally, the electrospinning patterning results of a silver paste ink on a glass substrate were investigated.

• International Journal of Costume and Fashion
• /
• v.13 no.2
• /
• pp.79-92
• /
• 2013

This article explores 1940's fashion. Much has been documented about the huge influence Dior's 1947 New Look had on fashionable clothing, as the industry conspired to reinvent itself as an economic and cultural power after World War II. The introduction of highly feminised and luxurious styles reinstated fashion as a viable concern globally and has arguably been recognised as the defining style of the 1940's. During World War II the fashion system of design, manufacture and export within the western world, virtually ceased. Many dress historians (Arnold, 2008; Breward, 1997; Guenther, 2004; McDowell, 1997; Robinson, 1976; Taylor, 1992; Steele, 1998; Veillon, 2002; Walford, 2008; Wilson & Taylor; 1989) have suggested that fashion ideas froze from 1939 to 1947. Deeper research identifies that during this period of style and trend starvation, many diverse and interesting design ideas arose from the restrictions imposed and Veillon (2002, p.145), has suggested that this period instigated what we now identify as Street Style (Polhemus, 2010). This research investigates the diversity of design ideas produced between 1939-1947 in order to establish whether pre or post 1947 can be upheld as the definitive 1940's look, one that influences contemporary fashion designers and one that we identify with as a conclusive style today.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.7
• /
• pp.1731-1740
• /
• 1995

Experimental investigations have been made to study the double-diffusive nature of convection of an initially stratified salt-water solution due to heating from below in a rotating cylindrical cavity. The objective is to examine the flow phenomena and the heat transfer characteristics according to the changes in temperature gradient, concentration gradient and rotating velocity of cavity. Thermal and solutal boundary conditions at side wall are adiabatic and impermeable, respectively. The top and bottom plate are maintained each at constant temperature and concentration. The cavity is put into a state of solid body rotation. Like the stationary case, the types of initially-formed flow pattern are classified into three regimes depending on the effective Rayleigh number and Taylor number; stagnant flow regime, single mixed-layer flow regime and successively formed multi-mixed layer flow regime. At the same effective Rayleigh number, the number of initially-formed mixed layer and its growth rate decrease as the effect of rotation increases. The temperature and concentration profiles are both uniform in each layer due to convective mixing in the layered-flow regime, but look both liner in stagnant flow regime and single mixed-layer flow regime. At the interface between adjacent layers, the temperature changes smoothly but the concentration changes rapidly.