• 제목/요약/키워드: Taylor Factor

검색결과 54건 처리시간 0.023초

정규압밀된 연약점토의 압밀시험시 측면 마찰의 영향 (Effect of Side Friction on Consolidation Test of Normally Consolidated Kaolinite Slurry)

  • 이장근
    • 한국지반환경공학회 논문집
    • /
    • 제9권3호
    • /
    • pp.61-68
    • /
    • 2008
  • 압밀시험시 시료의 두께에 대한 직정의 비율이 크면 일반적으로 측면마찰은 없다고 간주된다. 그러나, 시료의 두께가 커질수록 측면 마찰의 영향은 무시할 수 없게 된다. 본 연구에서는 정규압밀된 카올리나이트 슬러리의 압밀시험시 측면마찰의 영향을 조사하였다. 압밀시험을 통해 압밀시험곡선, 과잉간극수압, 압밀-간극비, 투수계수-간극비 관계를 측정하였고, 압밀-간극비 관계에 있어 측면마찰의 영향을 고려하기 위해 Taylor(1942)가 제안한 식을 적용하였다. 측정된 압밀시험곡선과 과잉간극수압에 대해 수치해석 결과와 비교 분석을 통해 측면 마찰이 압밀시험에 미치는 영향을 검토하였다. 그 결과, 측면 마찰의 영향을 고려한 수치해석 결과는 측면 마찰을 무시한 결과보다 측정값에 근사한 것으로 나타났으며, 측면 마찰은 압밀-간극비 관계 뿐만 아니라 압밀시간에도 영향을 주는 요인이라는 결과를 얻을 수 있었다.

  • PDF

Moving Path Tracing of Image Central Position with Autocorrelation Function

  • Kim, Young-Bin;Ryu, Kwang-Ryol;Sclabassi, Robert J.
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2008년도 춘계종합학술대회 A
    • /
    • pp.302-305
    • /
    • 2008
  • For an complete image composition to be stitched on several mosaic images, tracing displacement of direction and distance between successive images are important parameters. The input image is modeled by using a general second order two-dimensional Taylor-series and then converting it to a $3{\times}3$ correlation block and storing the data. A moving factor and coordinate is calculated by comparing the continuous correlation blocks. The experimentation result has a success rate of 85% for moving path tracing as continuous images are moved to 10% of image central position.

  • PDF

A study on temporal accuracy of OpenFOAM

  • Lee, Sang Bong
    • International Journal of Naval Architecture and Ocean Engineering
    • /
    • 제9권4호
    • /
    • pp.429-438
    • /
    • 2017
  • Cranke-Nicolson scheme in native OpenFOAM source libraries was not able to provide 2nd order temporal accuracy of velocity and pressure since the volume flux of convective nonlinear terms was 1st accurate in time. In the present study the simplest way of getting the volume flux with 2nd order accuracy was proposed by using old fluxes. A possible numerical instability originated from an explicit estimation of volume fluxes could be handled by introducing a weighting factor which was determined by observing the ratio of the finally corrected volume flux to the intermediate volume flux at the previous step. The new calculation of volume fluxes was able to provide temporally accurate velocity and pressure with 2nd order. The improvement of temporal accuracy was validated by performing numerical simulations of 2D Taylor-Green vortex of which an exact solution was known and 2D vortex shedding from a circular cylinder.

빛을 발산하는 기포의 안정성 해석 (Stability Analysis for a Sonoluminescing Gas Bubble)

  • 강상우;이윤표;곽호영
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2001년도 춘계학술대회논문집E
    • /
    • pp.69-74
    • /
    • 2001
  • It is well known that an air bubble trapped in water emits light at its collapse robustly with a proper forcing amplitude of ultrasound. Instability mechanism which causes deviation from sphericity of bubble wall was investigated theoretically. The rapid change of the bubble wall velocity which is both dependent on the forcing amplitude, was found to be a major factor of instability of the interface. The Rayleigh-Taylor instability which occurs when rapid acceleration is directed from the lighter towards the heavier fluid is found to be not related to the instability of the sonoluminescing gas bubble. A good agreement between the calculation results and experimental data is found.

  • PDF

Comparison of Matrix Exponential Methods for Fuel Burnup Calculations

  • Oh, Hyung-Suk;Yang, Won-Sik
    • Nuclear Engineering and Technology
    • /
    • 제31권2호
    • /
    • pp.172-181
    • /
    • 1999
  • Series expansion methods to compute the exponential of a matrix have been compared by applying them to fuel depletion calculations. Specifically, Taylor, Pade, Chebyshev, and rational Chebyshev approximations have been investigated by approximating the exponentials of bum matrices by truncated series of each method with the scaling and squaring algorithm. The accuracy and efficiency of these methods have been tested by performing various numerical tests using one thermal reactor and two fast reactor depletion problems. The results indicate that all the four series methods are accurate enough to be used for fuel depletion calculations although the rational Chebyshev approximation is relatively less accurate. They also show that the rational approximations are more efficient than the polynomial approximations. Considering the computational accuracy and efficiency, the Pade approximation appears to be better than the other methods. Its accuracy is better than the rational Chebyshev approximation, while being comparable to the polynomial approximations. On the other hand, its efficiency is better than the polynomial approximations and is similar to the rational Chebyshev approximation. In particular, for fast reactor depletion calculations, it is faster than the polynomial approximations by a factor of ∼ 1.7.

  • PDF

Analyses of centrifuge modelling for artificially sensitive clay slopes

  • Park, Dong Soon
    • Geomechanics and Engineering
    • /
    • 제16권5호
    • /
    • pp.513-525
    • /
    • 2018
  • Slope stability of sensitive clayey soils is particularly important when subjected to strength loss and deformation. Except for progressive failure, for most sensitive and insensitive slopes, it is important to review the feasibility of conventional analysis methods based on peak strength since peak strength governs slope stability before yielding. In this study, as a part of efforts to understand the behavior of sensitive clay slopes, a total of 12 centrifuge tests were performed for artificially sensitive and insensitive clay slopes using San Francisco Bay Mud (PI = 50) and Yolo Loam (PI = 10). In terms of slope stability, the results were analyzed using the updated instability factor ($N_I$). $N_I$ using equivalent unit weight to cause a failure is in reasonable agreement shown in the Taylor's chart ($N_I$ ~ 5.5). In terms of dynamic deformation, it is shown that two-way sliding is a more accurate approach than conventional one-way sliding. Two-way sliding may relate to diffused shear surfaces. The outcome of this study is contributable to analyzing stability and deformation of steep sensitive clay slopes.

BIFURCATIONS OF STOCHASTIC IZHIKEVICH-FITZHUGH MODEL

  • Nia, Mehdi Fatehi;Mirzavand, Elaheh
    • 호남수학학술지
    • /
    • 제44권3호
    • /
    • pp.402-418
    • /
    • 2022
  • Noise is a fundamental factor to increased validity and regularity of spike propagation and neuronal firing in the nervous system. In this paper, we examine the stochastic version of the Izhikevich-FitzHugh neuron dynamical model. This approach is based on techniques presented by Luo and Guo, which provide a general framework for the bifurcation and stability analysis of two dimensional stochastic dynamical system as an Itô averaging diffusion system. By using largest lyapunov exponent, local and global stability of the stochastic system at the equilibrium point are investigated. We focus on the two kinds of stochastic bifurcations: the P-bifurcation and the D-bifurcations. By use of polar coordinate, Taylor expansion and stochastic averaging method, it is shown that there exists choices of diffusion and drift parameters such that these bifurcations occurs. Finally, numerical simulations in various viewpoints, including phase portrait, evolution in time and probability density, are presented to show the effects of the diffusion and drift coefficients that illustrate our theoretical results.

미국 패스트 푸드 산업에서 '서비스의 질' 평가를 위한 측정 스케일 개발에 관한 연구 (Developing a Measure of Service Quality in the United States Fast Food Restaurant Segment)

  • 현성협;김이태
    • 동아시아식생활학회지
    • /
    • 제20권2호
    • /
    • pp.328-339
    • /
    • 2010
  • 이 연구의 목적은 패스트 푸드 산업에서 '서비스의 질'(Service Quality)을 측정할 수 있는 신뢰도 높은 측정 스케일을 개발하는 것이다. 선행 연구들은 SERVQUAL, SERVPERF, DINESERV 등의 스케일들을 개발해왔다. 하지만, 이론적 배경과 문헌고찰을 통해서, 이러한 선행 스케일들은 패스트 푸드 산업의 특성과는 적합하지 않다는 주장이 제시되었다. 따라서, 본 연구는 Cronin & Taylor(1992)의 이론적 배경을 바탕으로, '서비스의 질'은 소비자들의 태도이고, 이러한 점에서 그 회사에 대한 거시적 평가라는 부분에 초점을 맞추어, SERVPERF 아이템들을 initial pool로 선택하여 패스트 푸드 산업에 실무적으로 쓰일 수 있는 새로운 스케일을 개발하였다. 6단계에 걸친 체계적인 스케일 개발 과정들을 거쳐서 13개로 구성된 새로운 측정 스케일이 개발되었고, 3가지 하위 요인들(Responsiveness, Tangibles, and Reliability) 이 도출되었다. 패스트 푸드 레스토랑에 가는 빈도가 높은 소비자 그룹과의 심층 인터뷰를 통해서 기존의 SERVPERF 아이템들이 수정/보완되었다. 이렇게 수정/보완된 아이템들을 통계적으로 재평가하기 위해서 112명의 대학생 샘플로부터 얻어진 데이터를 이용하여 탐색적 요인 분석이 시행되었고, 아이템들이 통계적으로 재평가되었다. 마지막으로, 179명으로 구성된 패스트 푸드 레스토랑 소비자 그룹 데이터를 이용하여 확인적 요인 분석이 실시되어 convergent validity, discriminant validity, and internal consistency가 검증되었다. 새로 개발된 스케일은 이론적/통계적으로 유의하며, 신뢰도가 높다는 것이 확인되었다. 이를 바탕으로 실무적/이론적 시사점이 논의 되었다.

서남해안 관측자료를 활용한 OI 자료동화의 최적 매개변수 산정 연구 (Experimental Study of Estimating the Optimized Parameters in OI)

  • 구본호;우승범;김상일
    • 한국해안·해양공학회논문집
    • /
    • 제31권6호
    • /
    • pp.458-467
    • /
    • 2019
  • 본 연구는 자료동화에 필요한 매개변수의 최적화된 값를 산정하기 위해 서남해안을 포함하는 한반도 중심해역에 해양순환수치모델 FVCOM(Finite Volume Community Ocean Model)을 구축 및 검증하고 이에 연속관측된 수층별 유속자료와 OI(Optimal Interpolation)를 자료동화하였다. 자료동화에는 서남해안에 위치한 4정점에서 ADCP(Acoustic Doppler Current Profiler)을 통해 관측된 수층별 유속자료를 사용하였다. 자료동화에 사용된 배경 모델은 복잡하고 불규칙한 지형적 특성을 가진 서남해안 중심의 한반도 해역을 비구조격자체계의 해양순환수치모델인 FVCOM으로 구성하고 이를 조석검증하였다. 최적내삽법의 Correlation length와 Scale factor는 자료동화 과정에서 관측값의 영향 범위를 결정하고 오차를 보정할 수 있는 매개변수다. 자료동화기법 내 매개변수는 연구 지역에 존재하는 해양학적 특성에 따라 능동적으로 변동되기 때문에 이를 토대로 경험적인 산정 연구가 필요하다. 따라서 서남해안에서 요구되는 각 매개변수들을 Taylor diagram을 활용하여 관측정점별로 분석하고 최적값을 산정하였다. 산정된 최적매개변수는 관측정점마다 요구되는 값이 상이하며 연안에서 외해로 갈수록 증가하는 추세를 보인다. 추가로 조석검증 전과 후에 따른 배경 모델이 갖는 정확성이 자료동화 효과에 미치는 영향을 분석하였다. 조석검증을 통해 정확성이 높아진 배경 모델은 배경오차공분산이 상대적으로 감소됨에 따라서 총 비중 함수가 0에 가까워지고 결과적으로 최적매개변수값이 감소하였다. 이러한 최적매개변수는 광역 모델이 갖고 있는 연안역까지 도달하는 개방경계의 한계점을 완화시켜줄 것으로 기대하며 향후 관측정점별로 요구되는 최적매개변수값을 독립적으로 적용하도록 개선한다면 향상된 해양예측 시스템 개발에 도움이 될 것으로 기대한다.

대류가 유도하는 중규모 흐름에 미치는 비정역학 효과 (Nonhydrostatic Effects on Convectively Forced Mesoscale Flows)

  • 우소라;백종진;이현호;한지영;서재명
    • 대기
    • /
    • 제23권3호
    • /
    • pp.293-305
    • /
    • 2013
  • 대류가 유도하는 중규모 흐름에 미치는 비정역학 효과를 조사하기 위하여 기존의 무차원화된 정역학 모형을 바탕으로 무차원화된 비정역학 모형을 개발하였다. 모형을 검증하기 위하여 정역학 방정식 계의 해석해와 비정역학성이 아주 작은 경우의 수치 실험 결과를 비교하였고, 두 결과가 거의 같음을 확인하였다. 무차원화된 비정역학 모형을 이용하여 선형 계와 비선형 계에서 대류가 유도하는 중규모 흐름에 미치는 비정역학 효과를 조사하였다. 선형 계와 비선형 계 모두에서 비정역학성 인자가 작은 경우 열원 꼭대기 위에서 연직 방향으로, 비정역학성 인자가 상대적으로 큰 경우 주 상승 기류의 풍하측에서 수평 방향으로 상승 운동과 하강 운동이 교대하는 파동 형태의 섭동장이 나타났다. 풍하측에서 나타나는 상승 운동과 하강 운동을 분석하기 위하여 선형, 정상 상태, 비점성 흐름에 대한 Taylor-Goldstein 방정식을 구하였다. 주 상승기류의 풍하측에서 교대로 나타나는 상승 하강 기류세포는 전파파의 수평 방향 전파 성분과 에바네센트파, 즉 비정역학성 인자에 의해 결정되는 임계 파장보다 파장이 짧아 연직 방향으로 전파되지 못하고 수평 방향으로만 전파되는 중력파의 중첩으로 설명할 수 있다. 선형 계에 대한 수치 실험 결과에서 나타난 상승 하강 기류 세포의 수평 방향 길이는 선형 계에 대한 방정식에서 얻은 에바네센트 파의 임계 파장 길이의 절반과 일치하였으나, 약한 비선형 계에 대한 수치 실험 결과에서 나타난 상승 하강 기류 세포의 수평 방향 길이는 선형 계에 대한 방정식에서 얻은 에바네센트 파의 임계 파장 길이의 절반보다 다소 길었다. 주 상승 기류 지역 내에서 최대 상승 기류의 위치는 비선형성과 비정역학성 정도에 따라 다르게 나타났다.