• Journal of the Korean Geographical Society
• /
• v.42 no.4
• /
• pp.582-600
• /
• 2007

In a long history of geography, a variety of regional concepts have been suggested to represent the particular situations in each period. Today, post-modem situations, characterized by the development of capitalism and globalization, demand a new variety of regional concepts. The regional characteristics, such as social relations, institutional systems, ideologies and symbolism, are now perceived basically on the level of subjectivity. Currently, it is the most urgent task to integrate many conflicting opinions among a variety of subjects into the one that would seek a voluntary consent from the majority of regional residents. In this paper, it is suggested that the concept of identity is the most efficient in examining and explaining the post-modem trend of a region: variability, subjectivity, mobility, changeability, Finally, it is suggested that a special attention should be paid to the role of institutions, that is institutionalization, in the construction of regional identity, to understand and interpret the cultural-historical aspect of a regional change.

• Journal of The Korean Association For Science Education
• /
• v.22 no.4
• /
• pp.862-871
• /
• 2002

We investigated elementary students' conceptions of the simple electric circuit using a battery, a bulb and a wire, and made comparison between the cognitive conflict through peer discussion and the cognitive conflict through physical experience. Two hundred and sixty-four sixth grade students who already had learned about the electric circuit were participated. The questionnaire to investigate the student's conceptions about simple electric circuit consisted of 5 items drawing the wire connections between a battery and a bulb to light the bulb. The students in the discussion group paired randomly with student who had different conceptions, and then each pairs discussed about their ideas freely with each other. After discussion they conducted CCLT(Cognitive Conflict Level Test) which consisted of 4 factors; recognition, interest, anxiety, reappraisal. The physical experience group conducted a task in which they connected a battery and a bulb with a wire, then conducted CCLT. The sixth graders had various misconceptions. Most students were not aware of the scope of negative battery terminal and two electric terminals of a bulb. Many students emphasized the tip of a bulb and positive battery terminal. The score of CCLT in the discussion group was higher than in the physical experience group. This results showed that discussion with peers was more effective than physical experience to arouse cognitive conflict.

• Progress in Medical Physics
• /
• v.26 no.4
• /
• pp.193-200
• /
• 2015

The aim of this study is to present commissioning results of the ViewRay system. We verified safety functions of the ViewRay system. For imaging system, we acquired signal to noise ratio (SNR) and image uniformity. In addition, we checked spatial integrity of the image. Couch movement accuracy and coincidence of isocenters (radiation therapy system, imaging system and virtual isocneter) was verified. Accuracy of MLC positioing was checked. We performed reference dosimetry according to American Association of Physicists in Medicine (AAPM) Task Group 51 (TG-51) in water phantom for head 1 and 3. The deviations between measurements and calculation of percent depth dose (PDD) and output factor were evaluated. Finally, we performed gamma evaluations with a total of 8 IMRT plans as an end-to-end (E2E) test of the system. Every safety system of ViewRay operated properly. The values of SNR and Uniformity met the tolerance level. Every point within 10 cm and 17.5 cm radii about the isocenter showed deviations less than 1 mm and 2 mm, respectively. The average couch movement errors in transverse (x), longitudinal (y) and vertical (z) directions were 0.2 mm, 0.1 mm and 0.2 mm, respectively. The deviations between radiation isocenter and virtual isocenter in x, y and z directions were 0 mm, 0 mm and 0.3 mm, respectively. Those between virtual isocenter and imaging isocenter were 0.6 mm, 0.5 mm and 0.2 mm, respectively. The average MLC positioning errors were less than 0.6 mm. The deviations of output, PDDs between mesured vs. BJR supplement 25, PDDs between measured and calculated and output factors of each head were less than 0.5%, 1%, 1% and 2%, respectively. For E2E test, average gamma passing rate with 3%/3 mm criterion was $99.9%{\pm}0.1%$.

• The Korean Society of Law and Medicine
• /
• v.20 no.1
• /
• pp.133-162
• /
• 2019

Due to the nature of medical malpractice lawsuits, it is difficult for medical consumers, who are weak in getting information when it comes to health care problem, to secure all information inside the hospital. Even if you are confident about the hospital infection, it is true that people have difficult to obtain medical testimony by expert. It is seen as no easy task to testify to the malpractice of colleagues who work in the same field not only in our country but also abroad, when a doctor gives negative testimony to another doctor in a medical malpractice lawsuit. Although few health care providers will be motivated to take medical care from the outset, testimony or statements from a medical practitioner can have a significant impact on the outcome of a lawsuit, as it is impossible for the patient to control or be aware of the whole process of medical conduct, especially in the event of a hospital infection and the victim. If the hospital can prove the causality of damages caused by negligence of the employees or supervision of the hospital itself in a medical suit caused by the infection, the level of protection of the victim could be raised further. We sought to find a solution to these problems by looking at the provisions of other laws related to hospital infection. In particular, as the comparative legal review regarding hospital infection, Germany's legislative precedent sets a medical contract as a typical civil law contract, so it is thought that looking at German civil law regulations also has implications for Korean law. We also tried to improve the French Special Act 'rights of patients' and we can look at the consequent changes in court cases. Finally, the content of the U.S. case's and the theory of 'the doctrine of res ipsa loquitur' in relation to it show that doctors and hospitals have been forced to shift the burden of proof through this theory. This paper tried to find out the implications of mitigating the burden of proof by reviewing various issues that might be related to medical litigation of hospital infection from a comparative point of view.

• Journal of Society of Preventive Korean Medicine
• /
• v.7 no.1
• /
• pp.17-28
• /
• 2003

We met results like the followings through the literatures and questionnaires about the tasks and solutions about the insurance fee of packed medical herbs. 1) It's turned out that 74.8% of herb doctors agrees to the insurance fee of packed medical herbs. However, in comparison with the same survey of the herb doctor association the percentage of general approval went somewhat lower, and especially the percentage of 'positive approval' became notably lower$(43.7%{\rightarrow}26.5%)$ and the percentage of 'active objection' raised about 2 times$(6.8%{\rightarrow}12.9%)$. Inquiring into the approval reasons on the insurance fee application of packed medical herbs some heads such as 'development toward treatment medical science' and 'decrease of publics burden' were higher than the one of 'management income and expenditure.' 2) As a result of the research, 36.0% of the patients and 42.8% of the residents recognized that the pay range of Chinese herb health insurance is narrow. They recognized that less people have the experiences of Chinese medical hospital use and internal application of the packed medical herbs as they are older, men rather than women. 85.4% of the patients and 74.9% of the residents agreed on the insurance pay of packed medical herbs. It's shown that they agree on the Chinese medical hospital use more as the economic standard is lower, on the insurance pay as they have ever taken the packed medical herbs. In the aspect of increase of insurance fee, 66.7% of the patients and 44.3% of the residents agreed on the insurance pay of packed medical herbs, and 18.1% and 36.1% disagreed on the insurance pay of packed medical herbs. The main objective reason why they disagree on the insurance pay of packed medical herbs was 'because the insurance fee goes up higher,' which answered 95.2% of the patients and 78.8% of the residents. 7.22% of the patients and 1.80% of the residents answered that they can pay more insurance fee in case of the insurance pay of packed medical herbs. However, in the priority order of the insurance pay, it hold the 5th position between 2 target research groups which was less than medical examination, charges for hospital accommodation and taking MRI. 3) According to the result of analysis about the cost of packed medical herbs, current practice price is 115,000 won and the average prime cost of a packed medical herb is 73,000 to 106,000 won. It's examined that the herb doctors regard that 95,000 won will be reasonable when the packed medical herb is payed in insurance. However, it was found out that the public generally thinks that the price would be appropriate on the level of 30,000 to 40,000 won and the percentage of the answers of 20,000 won to 30,000 was fairly high. 4) the central system of a prescription should be change into the central system of demonstration and the sick and wounded. 5) To solve this problem, the government should regulate it to pass by the circulation gradation of [importer, $peasantry{\rightarrow}manufacturer{\rightarrow}wholesaler{\rightarrow}distributor$(Chinese medical hospital, pharmacy dispensary of Chinese medicine)]And it should intervene into the quality and the circulation steps of Chinese medicine through 'the office or organization which is in charge of certification of Chinese medicine' and 'the office or organization which is in charge of the circulation of Chinese medicine.' And some actions such as simple severance, lavation, drying should be included into the conception of manufacture and the boundary between food and medical supplies should be made at a manufactory. And the regulation of standardized goods at one's own house should be improved so that, the peasantry can sell the materials of Chinese medicine only to the manufacturer. 6) In company with the insurance pay of packed medical herbs, the study about the separation of dispensary from medical practice in the Chinese medicine should be accomplished.

• 대한공업교육학회지
• /
• v.38 no.2
• /
• pp.267-286
• /
• 2013

Recently, the advanced company has been sparing no efforts in improving necessary core knowledge and technology to achieve outstanding work performance. In this rapidly changing knowledge-based society, the company has confronted the task of creating a high value-added knowledge. The role of R&D workforce that corresponds to the characteristic and role of knowledge worker is getting more significant. As the life cycle of technical knowledge and skill shortens, in every industry, the technical knowledge and skill have become essential elements for successful business. It is difficult to improve competitiveness of the company without enhancing the competency of individual and organization. As the competency development which is a part of human resource management in the company is being spread now, it is required to focus on the research of determining necessary competency and to analyze the competency of a core organization in the research institute. 'H' is the semiconductor manufacturing company which has a affiliated research institute with its own R&D engineers. Based on focus group interview and job analysis data, vision and necessary competency were confirmed. And to confirm whether the required competency by job is different or not, analysis was performed by dividing members into workers who are in charge of circuit design and design before process development and who are in the process actualization and process development. Also, this research included members' importance awareness of the determined competency. The interview and job analysis were integrated and analyzed after arranging by groups and contents and the analyzed results were resorted after comparative analysis with a competency dictionary of Spencer & Spencer and competency models which are developed from the advanced research. Derived main competencies are: challenge, responsibility, and prediction/responsiveness, planning a new business, achievement -oriented, training, cooperation, self-development, analytic thinking, scheduling, motivation, communication, commercialization of technology, information gathering, professionalism on the job, and professionalism outside of work. The highly required competency for both jobs was 'Professionalism'. 'Attitude', 'Performance Management', 'Teamwork' for workers in charge of circuit design and 'Challenge', 'Training', 'Professionalism on the job' and 'Communication' were recognized to be required competency for those who are in charge of process actualization and process development. With above results, this research has determined the necessary competency that the 'H' company's affiliated research institute needs and found the difference of required competency by job. Also, it has suggested more enthusiastic education methods or various kinds of education by confirming the importance awareness of competency and individual's level of awareness about the competency.

• Journal of Broadcast Engineering
• /
• v.16 no.2
• /
• pp.216-225
• /
• 2011

Following the proliferation of three-dimensional video contents and displays, many terrestrial broadcasting companies have been preparing for stereoscopic 3DTV service. In terrestrial stereoscopic broadcast, it is a difficult task to code and transmit two video sequences while sustaining as high quality as 2DTV broadcast due to the limited bandwidth defined by the existing digital TV standards such as ATSC. Thus, a terrestrial 3DTV broadcasting with a heterogeneous video codec system, where the left image and right images are based on MPEG-2 and H.264/AVC, respectively, is considered in order to achieve both high quality broadcasting service and compatibility for the existing 2DTV viewers. Without significant change in the current terrestrial broadcasting systems, we propose a joint rate control scheme for stereoscopic 3DTV service based on the heterogeneous dual codec systems. The proposed joint rate control scheme applies to the MPEG-2 encoder a quadratic rate-quantization model which is adopted in the H.264/AVC. Then the controller is designed for the sum of the left and right bitstreams to meet the bandwidth requirement of broadcasting standards while the sum of image distortions is minimized by adjusting quantization parameter obtained from the proposed optimization scheme. Besides, we consider a condition on maintaining quality difference between the left and right images around a desired level in the optimization in order to mitigate negative effects on human visual system. Experimental results demonstrate that the proposed bit rate control scheme outperforms the rate control method where each video coding standard uses its own bit rate control algorithm independently in terms of the increase in PSNR by 2.02%, the decrease in the average absolute quality difference by 77.6% and the reduction in the variance of the quality difference by 74.38%.

• Journal of Fashion Business
• /
• v.6 no.2
• /
• pp.1-16
• /
• 2002

The need for ready-to-wear clothing increases as the problem comes to arise from the fit of custommade clothing due to the characteristics of middle-aged women's somatotype. At this point of time, a study on the realities of production of custom-made clothing in middle-aged women's clothing business firms is of very greatly significance. Therefore, this study was intended to identify the problem and improvements through the survey research of production of custom-made clothing in middle-aged women's clothing business firms and further present the plan for development of custom-made clothing business. The questionnaire was framed based on the contents extracted from the preliminary questionnaire research for the pattern section chief of each business firm. Collected data were statistically processed using the SPSS 10.0 Windows program. As a result, the following findings were obtained: 1. The target age of the middle-aged women's clothing business firms ranged from more than 45 years to less than 50 years of age. Clothing business firms much made inroads into the ready-to-wear clothing market largely in the 1980s and the 1990s. Their active entry into the custom-made clothing market occurred in the 1970s and the 1980s. 2. In terms of the clothing production method of middle-aged women's clothing firms, some private boutique and designer brand clothing firms entered the clothing market with a focus on custom-made clothing in the beginning of its organization and introduced the production method of ready-to-wear clothing in accordance with changes in production methods and consumers' needs and wants. National brand clothing firms manufactured clothing with a focus on ready-to-wear clothing from the beginning of its organization, but at last they manufactured both partial custom-made and whole custom-made as the problem arose from ready-to-wear clothing. Seeing that their clothing production showed the ratio readyto-wear to custom-made clothing of 2.58:1. And it was found that the manufacture of ready-to-wear and custom-made clothing took into consideration the great difference in the pattern, size and design plan. The research of the clothing production process showed that whole custom-made and partial custommade were distinguished according to whether or not the sample was presented. 3. The ready-to-wear pattern of middle-aged women's clothing firms were used with a focus on the 'patternmaker-developed pattern' and company-developed pattern'. Most clothing businesses produced clothing in 4 to 5 basic sizes, which is found to be insufficient to complement the physical characteristics of middle-aged women with many specific somatotypes. In the pattern of custom-made clothing, the 'pattern of ready-to-wear were applied' or the 'customized pattern was developed'. Actual measurements were most used as the size of custom-made, and accordingly it is predicted that the level of satisfaction is higher with the fit of custom-made clothing than that of ready-to-wear. The selling place and the head office showed the similar percent as the place for measuring the size of custom-made clothing. Size measurers were mostly the shop master. And it was found that most clothing business firms had a problem when the measured size was applied to the pattern. Accordingly, it is necessary to provide education on size measurement for shop masters. 4. It was found that in the middle-aged women's clothing firms, the pattern correction of the length of sleeve, jacket and slacks occupied the highest percent. Accordingly, it is necessary to provide for the size system to complement the accurate somatotype characteristics of middle-aged women. 5. In custom-made clothing customer management, most firms engaged in customer somatotype management through size management. They provided customers with commodity information by informing them of the sales and event period and practiced human management for customers by maintaining the get-together and friendly relationship. 6. Middle-aged women's clothing businesses responded that it would be necessary to improve the fit of custom-made clothing and complement their pursuit for individuality as the plan to improve its quality. In consequence, it suggests that middle-aged women's clothing businesses should provide middle-aged women with the clothing of better-suited size and refined design. Middle-aged women's clothing businesses responded that it was the most urgent task to form the custom-made clothing manufacturing team as the plan to expand the custom-made clothing market, which is identified as their emphasis on the systematized production of custom-made clothing.

• Journal of The Korean Association For Science Education
• /
• v.35 no.1
• /
• pp.37-52
• /
• 2015

In this study, assessment items to examine geocognition on plate tectonics were developed and applied to middle and high school students and college students. Conceptual constructs on plate tectonics are Earth interior structure, specific geomorphology, and geologic phenomena at each plate boundary. Construct for geocognition included temporal reasoning, spatial reasoning, retrospective reasoning, and system thinking. Pictorial data in each item were all obtained from GeoMapApp. Students' responses to the items were analyzed and measured cross-sectionally by Rasch model, which distinguishes persons' ability levels based on their scores for all items and compared them with item difficulty. By Rasch model analysis, Wright maps for middle and high school students and college students were obtained and compared with each other. Differential Item Functioning analysis was also implemented to compare students' item responses across school grades. The results showed: 1) Geocognition on plate tectonics was an assessable construct for middle and high school students in current science curriculum, 2) The most distinguished geocognition factor was spatial reasoning based on cross sectional analysis across school grades, 3) Geocognition on plate tectonics could be developed towards more sophisticated level through scaffolding of relevant instruction and earth science content knowledge, and 4) Geocognition was not a general reasoning separated from a task content but a content-specific reasoning related to the content of an assessment item. We proposed several suggestions for learning progressions for plate tectonics and national curriculum development based on the results of the study.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1993.06a
• /
• pp.975-976
• /
• 1993

This talk presents the overview of the author's research and development activities on fuzzy inference hardware. We involved it with two distinct approaches. The first approach is to use application specific integrated circuits (ASIC) technology. The fuzzy inference method is directly implemented in silicon. The second approach, which is in its preliminary stage, is to use more conventional microprocessor architecture. Here, we use a quantitative technique used by designer of reduced instruction set computer (RISC) to modify an architecture of a microprocessor. In the ASIC approach, we implemented the most widely used fuzzy inference mechanism directly on silicon. The mechanism is beaded on a max-min compositional rule of inference, and Mandami's method of fuzzy implication. The two VLSI fuzzy inference chips are designed, fabricated, and fully tested. Both used a full-custom CMOS technology. The second and more claborate chip was designed at the University of North Carolina(U C) in cooperation with MCNC. Both VLSI chips had muliple datapaths for rule digital fuzzy inference chips had multiple datapaths for rule evaluation, and they executed multiple fuzzy if-then rules in parallel. The AT & T chip is the first digital fuzzy inference chip in the world. It ran with a 20 MHz clock cycle and achieved an approximately 80.000 Fuzzy Logical inferences Per Second (FLIPS). It stored and executed 16 fuzzy if-then rules. Since it was designed as a proof of concept prototype chip, it had minimal amount of peripheral logic for system integration. UNC/MCNC chip consists of 688,131 transistors of which 476,160 are used for RAM memory. It ran with a 10 MHz clock cycle. The chip has a 3-staged pipeline and initiates a computation of new inference every 64 cycle. This chip achieved an approximately 160,000 FLIPS. The new architecture have the following important improvements from the AT & T chip: Programmable rule set memory (RAM). On-chip fuzzification operation by a table lookup method. On-chip defuzzification operation by a centroid method. Reconfigurable architecture for processing two rule formats. RAM/datapath redundancy for higher yield It can store and execute 51 if-then rule of the following format: IF A and B and C and D Then Do E, and Then Do F. With this format, the chip takes four inputs and produces two outputs. By software reconfiguration, it can store and execute 102 if-then rules of the following simpler format using the same datapath: IF A and B Then Do E. With this format the chip takes two inputs and produces one outputs. We have built two VME-bus board systems based on this chip for Oak Ridge National Laboratory (ORNL). The board is now installed in a robot at ORNL. Researchers uses this board for experiment in autonomous robot navigation. The Fuzzy Logic system board places the Fuzzy chip into a VMEbus environment. High level C language functions hide the operational details of the board from the applications programme . The programmer treats rule memories and fuzzification function memories as local structures passed as parameters to the C functions. ASIC fuzzy inference hardware is extremely fast, but they are limited in generality. Many aspects of the design are limited or fixed. We have proposed to designing a are limited or fixed. We have proposed to designing a fuzzy information processor as an application specific processor using a quantitative approach. The quantitative approach was developed by RISC designers. In effect, we are interested in evaluating the effectiveness of a specialized RISC processor for fuzzy information processing. As the first step, we measured the possible speed-up of a fuzzy inference program based on if-then rules by an introduction of specialized instructions, i.e., min and max instructions. The minimum and maximum operations are heavily used in fuzzy logic applications as fuzzy intersection and union. We performed measurements using a MIPS R3000 as a base micropro essor. The initial result is encouraging. We can achieve as high as a 2.5 increase in inference speed if the R3000 had min and max instructions. Also, they are useful for speeding up other fuzzy operations such as bounded product and bounded sum. The embedded processor's main task is to control some device or process. It usually runs a single or a embedded processer to create an embedded processor for fuzzy control is very effective. Table I shows the measured speed of the inference by a MIPS R3000 microprocessor, a fictitious MIPS R3000 microprocessor with min and max instructions, and a UNC/MCNC ASIC fuzzy inference chip. The software that used on microprocessors is a simulator of the ASIC chip. The first row is the computation time in seconds of 6000 inferences using 51 rules where each fuzzy set is represented by an array of 64 elements. The second row is the time required to perform a single inference. The last row is the fuzzy logical inferences per second (FLIPS) measured for ach device. There is a large gap in run time between the ASIC and software approaches even if we resort to a specialized fuzzy microprocessor. As for design time and cost, these two approaches represent two extremes. An ASIC approach is extremely expensive. It is, therefore, an important research topic to design a specialized computing architecture for fuzzy applications that falls between these two extremes both in run time and design time/cost. TABLEI INFERENCE TIME BY 51 RULES {{{{Time }}{{MIPS R3000 }}{{ASIC }}{{Regular }}{{With min/mix }}{{6000 inference 1 inference FLIPS }}{{125s 20.8ms 48 }}{{49s 8.2ms 122 }}{{0.0038s 6.4㎲ 156,250 }} }}