• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1284-1284
• /
• 2001

The transesterification of molten ethylene/vinylacetate (EVA) copolymers by octanol as a reagent and sodium methoxide as a catalyst in an extruder has been monitored by on-line near infrared (NIR) spectroscopy. A total of 60 NIR spectra were acquired for 37 minutes with the last spectrum recorded 31 minutes after the addition of octanol and catalyst was stopped. The experimental spectra show strong baseline fluctuations which are corrected for by multiplicative scatter correction (MSC). The chemometric methods of orthogonal projection approach (OPA) and multivariate curve resolution (MCR) were used to resolve the spectra and to derive concentration profiles of the species. The detailed analysis reveals the absence of completely pure variables that leads to small errors in the calculation of pure spectra. The initial estimation of a concentration that is necessary as an input parameter for MCR also presents a non-trivial task. We obtained results that were not ideal but applicable for practical concentration control. They enable a fast monitoring of the process in real-time and resolve the spectra of the EVA copolymer and the ethylene/vinyl alcohol (EVAL) copolymer to be very close to the reference spectra. The chemometric methods used and the decomposed spectra are discussed in detail.

• Journal of the Korean Society of Safety
• /
• v.27 no.4
• /
• pp.96-100
• /
• 2012

Low back pain (LBP) is a major issue in modern industrialized society which is mainly caused by manual material handling (MMH) tasks. The objective of this study was to provide scientific data for establishing work standard for Korean workers throughout the laboratory experiment including some specific lifting tasks. Thirty male college students were recruited as participants. The maximum voluntary contraction (MVC), recommended weight limit (RWL), and psychophysical safety weight using Borg's CR-10 scale were studied. Results showed that the RWL was 8.4% MVC higher than the proposed psychophysical safety weight. Based on this result, it is suggested that the NIOSH lifting equation (NLE) should not be directly applied to Korean without reasonable modifications. The ratio of psychophysical safety weight to MVC was ranged from 20.1 to 26.4%. It is expected that use of the methodology in this study may provide better expectation of the work ability of Korean for reducing lower back pains caused by MMH.

• Journal of the Korean Society of Safety
• /
• v.23 no.1
• /
• pp.46-50
• /
• 2008

The purpose of the present study was to investigate the mariner's information characteristics in ship-ta-ship collision situation using the full mission ship-handling simulator. Risk levels of ship-to-ship collision were manipulated by whether the target ship complies with the naval regulations and by movement patterns of target ship. Dependent variables reflecting mariner's information characteristics in ship-ta-ship collision situation were measured in terms of radar detection reaction time, free recall performance of past navigation situation, and subjective ratings for the task difficulty. The results showed that, in general, the mariners appeared to be deteriorated in their radar detection reaction time and free recall performance as the risk of ship-ta-ship collision increased. Also, the mariners tended to rate required tasks more difficult in the high risk ship-ta-ship collision situation.

• Science of Emotion and Sensibility
• /
• v.21 no.2
• /
• pp.125-136
• /
• 2018

Although atypical sensory processing is a core feature of autism spectrum disorder (ASD), there is considerable heterogeneity among ASD individuals in the modality and symptoms of atypical sensory processing. The present study examined visual processing of children with ASD, focusing on the complexity and orientation of visual information. Age- and -IQ-matched Korean children (14 ASD and 14 typically-developing (TD) children) received an orientation discrimination task involving static spatial gratings varied in complexity (simple versus complex) and orientation (horizontal versus vertical). The results revealed that ASD children had difficulty perceiving complex information regardless of orientation, whereas TD children had more difficulty with vertical gratings than horizontal gratings. Thus, group-level differences between ASD and TD children appeared greater when gratings were presented horizontally. Unlike ASD adult literature, however, ASD children did not show superior performance on simple gratings. Our findings on typical and atypical processing of ASD children have implications for both understanding the characteristics of ASD children and developing diagnostic tools for ASD.

• Journal of Computing Science and Engineering
• /
• v.2 no.3
• /
• pp.274-300
• /
• 2008

Software testing cost can be reduced if the process of testing is automated. However, the test data generation task is still performed mostly by hand although numerous theoretical works have been proposed to automate the process of generating test data and even commercial test data generators appeared on the market. Despite prolific research reports, few attempts have been made to evaluate and characterize those techniques. Therefore, a lot of works have been proposed to automate the process of generating test data. However, there is no overall evaluation and comparison of these techniques. Evaluation and comparison of existing techniques are useful for choosing appropriate approaches for particular applications, and also provide insights into the strengths and weaknesses of current methods. This paper conducts experiments on four representative test data generation techniques and discusses the experimental results. The results of the experiments show that the genetic algorithm (GA)-based test data generation performs the best. However, there are still some weaknesses in the GA-based method. Therefore, we modify the standard GA-based method to cope with these weaknesses. The experiments are carried out to compare the standard GA-based method and two modified versions of the GA-based method.

• Smart Structures and Systems
• /
• v.7 no.2
• /
• pp.133-152
• /
• 2011

System identification is a fundamental step towards the application of structural health monitoring and damage detection techniques. On this respect, the development of evolved identification strategies is a priority for obtaining reliable and repeatable baseline modal parameters of an undamaged structure to be adopted as references for future structural health assessments. The paper presents the identification of the modal parameters of the Guangzhou New Television Tower, China, using a data-driven stochastic subspace identification (SSI-data) approach complemented with an appropriate automatic mode selection strategy which proved to be successful in previous literature studies. This well-known approach is based on a clustering technique which is adopted to discriminate structural modes from spurious noise ones. The method is applied to the acceleration measurements made available within the task I of the ANCRiSST benchmark problem, which cover 24 hours of continuous monitoring of the structural response under ambient excitation. These records are then subdivided into a convenient number of data sets and the variability of modal parameter estimates with ambient temperature and mean wind velocity are pointed out. Both 10 minutes and 1 hour long records are considered for this purpose. A comparison with finite element model predictions is finally carried out, using the structural matrices provided within the benchmark, in order to check that all the structural modes contained in the considered frequency interval are effectively identified via SSI-data.

• Earthquakes and Structures
• /
• v.14 no.5
• /
• pp.389-398
• /
• 2018

The seismic isolation system makes a structure isolated from ground motions to protect the structure from seismic events. Seismic isolation techniques have been implemented in full-scale buildings and bridges because of their simplicity, economic effectiveness, inherent stability and reliability. As for the responses of an isolated structure due to seismic events, it is well known that the most uncertain aspects are the seismic loading itself and structural properties. Due to the randomness of earthquakes and uncertainty of structures, seismic response distributions of an isolated structure are needed when evaluating the seismic fragility assessment (or probabilistic seismic safety assessment) of an isolated structure. Seismic response time histories are useful and often essential elements in its design or evaluation stage. Thus, a large number of non-linear dynamic analyses should be performed to evaluate the seismic performance of an isolated structure. However, it is a monumental task to gather the design or evaluation information of the isolated structure from too many seismic analyses, which is impractical. In this paper, a new methodology that can evaluate the seismic fragility assessment of an isolated structure is proposed by using stochastic response database, which is a device that can estimate the seismic response distributions of an isolated structure without any seismic response analyses. The seismic fragility assessment of the isolated nuclear power plant is performed using the proposed methodology. The proposed methodology is able to evaluate the seismic performance of isolated structures effectively and reduce the computational efforts tremendously.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.610-615
• /
• 2005

Visual servoing is the fusion of results from many elemental areas including high-speed image processing, kinematics, dynamics, control theory, and real-time computing. It has much in common with research into active vision and structure from motion, but is quite different from the often described use of vision in hierarchical task-level robot control systems. We present a new approach to visual feedback control using image-based visual servoing with the stereo vision in this paper. In order to control the position and orientation of a robot with respect to an object, a new technique is proposed using a binocular stereo vision. The stereo vision enables us to calculate an exact image Jacobian not only at around a desired location but also at the other locations. The suggested technique can guide a robot manipulator to the desired location without giving such priori knowledge as the relative distance to the desired location or the model of an object even if the initial positioning error is large. This paper describes a model of stereo vision and how to generate feedback commands. The performance of the proposed visual servoing system is illustrated by the simulation and experimental results and compared with the case of conventional method for dual-arm robot made in Samsung Electronics Co., Ltd.

• Korean Journal of Occupational Health Nursing
• /
• v.21 no.3
• /
• pp.283-289
• /
• 2012

Purpose: The purpose of this study was to identify the effects of the social support and ego-resilience on the nursing performance among hospital nurses. Methods: The subjects of this study were 369 nurses in a senior general hospital. We used the self-reported questionnaire to assess the level of ego-resilience, social support and nursing performance of hospital nurses. The data were analyzed using descriptive statistics, frequency, t-test, ANOVA, Pearson's correlation coefficient and stepwise multiple regression. Results: This study showed the positive relationship between the social support and ego-resilience on tne the nursing performance of hospital nurses. The higher group of the social support and ego-resilience showed the more performance of hospital nurses. And, the influencing factors on the performance are age, ego-resilience, social support, night working days a month in the order. Conclusion: Further studies will be needed to promote the performance of nurse in hospital and policies to be develop to elevate the social support and ego-resilience of nurses.

• Journal of Korean Public Health Nursing
• /
• v.24 no.1
• /
• pp.5-18
• /
• 2010

Purpose: The purpose of this study is to understand nurses' perception of visiting nursing services of long-term care insurance. Method: The descriptive survey study involved 188 nurses selected by the convenient sampling of visiting nurses who participated in professional education sessions. Results: Of the 188 participants, 149 (79.3%) were aware of long-term care insurance. Awareness of aspects of long-term care services was 78.7% for facility service, 77.7% for ordinary visiting care service, 85.1% for visiting nursing service and 77.7% for visiting bathing service. Concerning visiting nursing service provision, the majority of the study subjects considered nurse-aid not to be the appropriate route for delivery of services including nasogastric tube exchange, tracheostomy tube management and stitch removal. Conclusion: Continuous evaluation and research on the standards and requirements of the nursing workforce is needed to secure and maintain the high quality of visiting nursing services. Exhaustive studies concerning task division and workforce separation according to nursing services type and level of difficulty should be done to develop the appropriate job description for visiting nursing service staff.