• Korean Journal of Clinical Laboratory Science
• /
• v.36 no.2
• /
• pp.158-162
• /
• 2004

The over-preparation of blood for elective surgery causes some problems such as returning of blood, inefficient task and loss of reagents. In recent blood transfusion practice, there has been changing patterns of blood use in elective surgery as various side effects of transfusion have become known and operation techniques are developed. This study was performed to evaluate the optimal utilization of blood for various elective and/or emergency surgery. We surveyed the quantity of blood transmitted to wards, returned to blood bank, and the number of crossmatching test done for the elective surgery of the patients at the D. University Hospital, the tertiary teaching hospital from August 1, 2001 to October 31, 2001. Crossmatched to transfusion ratio (C/T ratio) was calculated, in which C means the unit of accomplished crossmatching test and T means the unit of transfused blood component. The unit of transfused blood was analysed in terms of issuing time, sex, age, clinical department, and blood component type. The usage of bloods for the emergency surgery was also analyzed. In our study, C/T ratio was highest on Monday (1.54) and Tuesday (1.53), and higher in female patients(1.54) than in male patients (1.32). No significant relationship was observed between age groups. Among clinical departments, thoracic and cardiovascular surgery showed the highest C/T ratio (1.54). From above results, we could be sure that the management of transfusion practice was relatively appropriate in recent years, although the entire introduction of type and screen (T&S) method was desirable. If the T&S method is performed, the C/T ratio would be almost 1.00 and it would also relieve the duty of blood bank.

• Journal of the Korea Society of Computer and Information
• /
• v.13 no.6
• /
• pp.95-105
• /
• 2008

Recently use of embedded software has been increased to different areas. The requirements and demands for the embedded software have also been altered. In the past, the embedded system was used in simple task and small portable devices but now, the usage of the embedded software has expanded to do much more complex and precise actions in a variety platform environment. The embedded software enables multiple softwares to be integrated into one and at the same time, control it. Currently the biggest challenges embedded software is facing during its development process is the improvement in product production and quality assurance. Our research team has developed an embedded software based on the component (technology or methodology) which both improves production capabilities as well as quality. Additionally, we also established and constructed a reliability test system which can effectively test the quality of the developed embedded software to further increase its competiveness.

• Journal of Convergence for Information Technology
• /
• v.11 no.9
• /
• pp.138-144
• /
• 2021

In the electronic component assembly business, when product defects occur, it is important to track incoming raw material defects or work defects, and it is important to improve suppliers or work sites according to the results. The core task of the smart factory is to build an integrated data hub to process storage, management, and analysis in real time, and to manage cluster processes, energy, environment, and safety. In order to improve reliability through accurate analysis and collection of production data by real-time monitoring of production site management for electronic parts-related small and medium-sized enterprises (SMEs), the establishment of a smart factory is essential. This paper was developed to be utilized in the construction by defining the system configuration method, smart factory-related technology and application cases, considering the characteristics of SMEs related to electronic components that want to introduce a smart factory.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.8B
• /
• pp.509-520
• /
• 2007

In this paper, we propose a real-time sensor node platform that guarantees the real-time scheduling of periodic and aperiodic tasks through a multitask-based software decomposition technique. Since existing sensor networking operation systems available in literature are not capable of supporting the real-time scheduling of periodic and aperiodic tasks, the preemption of aperiodic task with high priority can block periodic tasks, and so periodic tasks are likely to miss their deadlines. This paper presents a comprehensive evaluation of how to structure periodic or aperiodic task decomposition in real-time sensor-networking platforms as regard to guaranteeing the deadlines of all the periodic tasks and aiming to providing aperiodic tasks with average good response time. A case study based on real system experiments is conducted to illustrate the application and efficiency of the multitask-based dynamic component execution environment in the sensor node equipped with a low-power 8-bit microcontroller, an IEEE802.15.4 compliant 2.4GHz RF transceiver, and several sensors. It shows that our periodic and aperiodic task decomposition technique yields efficient performance in terms of three significant, objective goals: deadline miss ratio of periodic tasks, average response time of aperiodic tasks, and processor utilization of periodic and aperiodic tasks.

• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• v.8 no.2
• /
• pp.273-286
• /
• 1997

Objective：This study was designed to evaluate effects of methylphenidate(MPH) on event-related potentials(ERP) and continuous performance test(CPT) in attention-deficit hyperactivity disorder (ADHD) and to see the correlation between changes in ERP and changes in performance. Method：ERP and CPT were used to examine the acute effects of MPH(0.5mg/kg) in eleven ADHD boys(89-103 months old). Results：1) After MPH administration, P3 latency to nontarget stimuli at Fz was significantly decreased (p<0.01) and P2 amplitudes to target stimuli at Pz and at Oz and P3 amplitude to target stimuli at Cz were significantly increased(p<0.05). 2) Commission error and omission error in the CPT-X and commission error in the CPT-AX were decreased(p<0.01), and hits and perceptual sensitivity(d') in the CPT-X and d′ in the CPT-AX were increased(p<0.01). 3) The change of P3 latency to nontarget stimuli at Fz and the change of d′ in the CPT-X were negatively correlated(p<0.05), and the change of P2 amplitude to target stimuli at Pz and d′ in the CPT-AX were positively correlated(p<0.05). Conclusion：MPH improves change orienting reaction, the delivery of task relevant information, accuracy and perceptual sensitivity in ADHD. And the increase of ability to discriminate targets from non-targets reflects reduced evaluation time in large memory component task and enhanced change orienting reaction in simple task.

• Journal of KIISE:Computer Systems and Theory
• /
• v.33 no.9
• /
• pp.592-607
• /
• 2006

This paper proposes a technique to select processors and hardware IPs and to map the tasks into the selected processing elements, aming to achieve high performance with minimal system cost when multitask applications with real-time constraints are run on a multicore SoC. Such technique is called to 'Hardware-Software Cosynthesis Technique'. A cosynthesis technique was already presented in our early work [1] where we divide the complex cosynthesis problem into three subproblems and conquer each subproblem separately: selection of appropriate processing components, mapping and scheduling of function blocks to the selected processing component, and schedulability analysis. Despite good features, our previous technique has a serious limitation that a task monopolizes the entire system resource to get the minimum schedule length. But in general we may obtain higher performance in multitask multicore system if independent multiple tasks are running concurrently on different processor cores. In this paper, we present two mapping techniques, task mapping avoidance technique(TMA) and task mapping pinning technique(TMP), which are applicable for general cases with diverse operating policies in a multicore environment. We could obtain significant performance improvement for a multimedia real-time application, multi-channel Digital Video Recorder system and for randomly generated multitask graphs obtained from the related works.

• International Journal of Contents
• /
• v.6 no.2
• /
• pp.1-5
• /
• 2010

The rapid growth in communication technology has led to the development of effective ways of sharing ideas and information in the form of speech and images. Understanding this information has become an important research issue and drawn the attention of many researchers. Text in a digital image contains much important information regarding the scene. Detecting and extracting this text is a difficult task and has many challenging issues. The main challenges in extracting text from natural scene images are the variation in the font size, alignment of text, font colors, illumination changes, and reflections in the images. In this paper, we propose a connected component based method to automatically detect the text region in natural images. Since text regions in mages contain mostly repetitions of vertical strokes, we try to find a pattern of closely packed vertical edges. Once the group of edges is found, the neighboring vertical edges are connected to each other. Connected regions whose geometric features lie outside of the valid specifications are considered as outliers and eliminated. The proposed method is more effective than the existing methods for slanted or curved characters. The experimental results are given for the validation of our approach.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.5
• /
• pp.435-441
• /
• 2013

A swarm robot system consists of with multiple mobile robots, each of which is called an agent. Each agent interacts with others and cooperates for a given task and a given environment. For the swarm robotic system, the loss of the entire work capability by malfunction or damage to a single robot is relatively small and replacement and repair of the robot is less costly. So, it is suitable to perform more complex tasks. The essential component for a swarm robotic system is an inter-robot collaboration strategy for teamwork. Recently, the swarm intelligence theory is applied to robotic system domain as a new framework of collective robotic system design. In this paper, FA (Firefly Algorithm) which is based on firefly's reaction to the lights of other fireflies and their social behavior is employed to optimize the group behavior of multiple robots. The main application of the firefly algorithm is performed on path planning of swarm mobile robots and its effectiveness is verified by simulations under various conditions.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1550-1554
• /
• 2004

This paper deals with an unmanned vehicle system configuration using all terrain vehicle. Many research institutes and university study and develop unmanned vehicle system and control algorithm. Now a day, they try to apply unmanned vehicle to use military device and explore space and deep sea. These unmanned vehicles can help us to work is difficult task and approach. In the previous research of unmanned vehicle in our lab, we used 1/10 scale radio control vehicle and composed the unmanned vehicle system using ultrasonic sensors, CCD camera and kinds of sensor for vehicle's motion control. We designed lane detecting algorithm using vision system and obstacle detecting and avoidance algorithm using ultrasonic sensor and infrared ray sensor. As the system is increased, it is hard to compose the system on the 1/10 scale RC car. So we have to choose a new vehicle is bigger than 1/10 scale RC car but it is smaller than real size vehicle. ATV(all terrain vehicle) and real size vehicle have similar structure and its size is smaller. In this research, we make unmanned vehicle using ATV and explain control theory of each component

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.202-205
• /
• 2004

This paper represents the role of pinna in localizing target direction. Specially, this paper described what is the role of right-side pinna versus left-side pinna. In this experiment, one side of the pinna function was distorted intentionally by inserting a short tube on the ear canal. The localization error caused by right and left side pinna distortion was investigated. Since a laser pointer showed much less error (0.5%) in localizing target position than FASTRAK (30%) that has been generally used, it was used for the pointing task. It was found that harmonic components were not essential for the auditory target localization, however, non-harmonic nearby frequency components were more important to localize target direction of sound. We have found that the right pinna is one of the most important functions in localizing target direction and pure tone with only one frequency component is confusing for localization.