• Proceedings of KOSOMES biannual meeting
• /
• 2017.04a
• /
• pp.79-79
• /
• 2017

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.38 no.3
• /
• pp.249-255
• /
• 2002

This paper describes on the extraction of ship's real-time movement information using a combination full-function ARPA radar and ECS system that displays radar images and an electronic chart together on a single PC screen. The radar target extractor(RTX) board, developed by Marine Electronics Corporation of Korea, receives radar video, trigger, antenna bearing pulse and heading pulse signals from a radar unit and processes these signals to extract target information. The target data extracted from each pulse repetition interval in DSPs of RTX that installed in 16 bit ISA slot of a IBM PC compatible computer is formatted into a series of radar target messages. These messages are then transmitted to the host PC and displayed on a single screen. The position data of target in range and azimuth direction are stored and used for determining the center of the distributed target by arithmetic averaging after the detection of the target end. In this system, the electronic chart or radar screens can be displayed separately or simulaneously and in radar mode all information of radar targets can be recorded and replayed In spite of a PC based radar system, all essential information required for safe and efficient navigation of ship can be provided.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2014.06a
• /
• pp.63-64
• /
• 2014

NIR(New Inspection Regime, hereinafter NIR) relating to the PSC(Port State Contorl, hereinafter PSC) has implemented in Asia-Pacific region under Tokyo-MOU from last January 2014. The most noticable difference between NIR and existing TF(Target Factor, hereinafter TF) is to evaluate company performance and to conduct PSC with flexible inspection interval on the basis of Ship Risk Profile; High Risk Ship, Standard Risk Ship and Low Risk Ship.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.24 no.5
• /
• pp.507-512
• /
• 2011

This study is concerned with the reliability analysis and its based design of midship section against the ultimate bending strength. Eight bulk carriers and seven oil tankers over 100m length are chosen for the present study. Target reliability indices for the two ship types have been derived based on the results reliability analysis of the present ship models. Reliability-based structural design codes are proposed for use in design of midship section of bulk carriers and oil tankers. The design codes proposed in this study have been successfully applied to re-design of midship section of the present ship types. It has been found that the proposed codes can provide more uniform structural design results.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.625-628
• /
• 2007

We present an efficient and robust technique to estimate the velocity of moving targets from a single SAR image. In SAR images, azimuth image shift is a well known phenomenon, which is observed in moving targets having slant-range velocity. Most methods estimated the velocity of moving targets from the distance difference between the road and moving targets or between ship and the ship wake. However, the methods could not be always applied to moving targets because it is difficult to find the road and the ship wake. We adopted a method estimating the velocity of moving targets from azimuth differentials of range-compressed image. This method is based on an assumption that Doppler center frequency shift of moving target causes a phase difference in azimuth differential values. The phase difference is linearly distorted by Doppler rate due to the geometry of SAR image. The linear distortion is eliminated from phase removal procedure, and the constant phase difference is estimated. Finally, range velocity estimates for moving targets are retrieved. This technique is tested using an ENVISAT ASAR image in which several unknown ships are presented. The theoretical accuracy of this technique is discussed by SAR simulation. The advantages and disadvantages of this method over the conventional method are also discussed.

• Corrosion Science and Technology
• /
• v.7 no.4
• /
• pp.219-223
• /
• 2008

In 2006, as a means to minimize early corrosion failure of ships, thus to enhance marine safety, International Maritime Organization (IMO), proposed a mandatory regulation for Performance Standards for the Protective Coatings (PSPC) for ballast tanks of newly built ships to satisfy 15 years of target useful life. In this regulation, several unprecedented strict rules are adopted as minimum, mandatory requirements for protective coatings of ship's water ballast tanks, and all type of ships sailing international sea are subjected to this regulation which is to be effective as early as June of 2008. The PSPC addresses many technical issues in the areas of surface pretreatment (primary and secondary), coating materials, coating application procedure and inspection as well as necessary documentation. The PSPC rules are new and unproven concepts, which calls for rigorous incorporation of reality-based evidences currently available, since there are no practical experiences in terms of the validity of the PSPC rules. There has been much controversy surrounding these regulations and considerable effort has been made by both shipyards and ship owners alike to achieve a performance standard for ballast tank coatings, which is acceptable to all. In this paper, the background and overview of the PSPC rules are given, and several issues in the PSPC are reviewed as a base to achieve robustness of the proposed PSPC, which will serve as a means to minimize early corrosion and to ensure 15 year target useful life of ships.

• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.635-638
• /
• 1998

This paper proposes a simple method to measure system's performance in target tracking problems. Essentially employing the Cramer-Rao lower bound (CRLB) on trakcing accuracy, an algorithm of predicting system's performance under various scenarios is developed. The input data is a collection of measurements over time fromsensors embedded in gaussian noise. The target of interest may not maneuver over the processing time interval while the own ship observing platform may maneuver in an arbitrary fashion. Th eproposed approach is demonstrated and discussed through simulation results.

• Journal of the Society of Naval Architects of Korea
• /
• v.45 no.4
• /
• pp.361-369
• /
• 2008

The optimized distance between skegs and angle of the skeg for a standard twin-skeg type LNG carrier were presented using the CFD and model tests. The evaluation method of self-propulsion performance was derived based on the results of CFD and confirmed the validity through model tests. The analyses to assess self-propulsion performance using CFD were shown by flow line patterns on the skeg surface, nominal wake distribution in the propeller plane and the evaluation for flow balance around stern skegs. The optimized ship that was applied to the optimized two design parameters in stern skeg arrangement for target ship was derived in this work. Finally speed performance of mother ship which is existing ship and optimized ship were compared through CFD and model tests. And the usefulness about the evaluation method of self-propulsion performance was reconfirmed.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2018.11a
• /
• pp.346-347
• /
• 2018

This study is a case study on ship zone identification for the generalization of fire safety module in Korean e-Navigation system and assessed the method of dividing the area of the ship based on the location of the fire detector of the target ship.

• The Journal of Economics, Marketing and Management
• /
• v.5 no.3
• /
• pp.30-38
• /
• 2017

The main target to do this analysis is to find out the competitiveness between 2 countries(Korea and USA) in the ship business industry. Ever since free from Japanese empire domination of modern history in Korean peninsular, Korea has been strong relationship with USA almost every fields. The purpose of this research is to realize which country is more competitive between 2 country's trade structure. This research conducted for period from 2000 to 2016. Expecting effect is to learn how to improve ship industry for 2 countries. Research method is used by comparative advantage trade theory. Even though Koran government has been accomplishing trade stimulus environment against USA ship industry, it is research limitation that overseas productions both Korean & USA are not available due to company business strategy. From early 50's, every USA industries hold a dominant position so far. Now, Korea is comparative advantage against that of USA in the field of ship industry. Sound competition relationship is good for both 2 countries for mutual benefits. The future prospect is Korea needs export market diversification to enlarge economic growth in the long run.