• 대한방사선치료학회지
• /
• 제25권1호
• /
• pp.41-47
• /
• 2013

목 적: 최근 Integrated PET/CT (GE Discovery 690, General Electric Healthcare, Milwaukee, MI, USA, 이하 PET/CT) 전산화 모의치료기가 방사선치료에 적용되면서 정확한 표적용적(Target Volume, TV)의 묘사가 가능하게 되었다. 본 연구에서는 포도당 유도체 불소화합물(F-18 fluoro-2-deoxyglucose, FDG)을 이용한 비소세포폐암 환자의 육안적표적용적(Gloss Target Volume, GTV)을 비교하여 유용성을 평가하고자 한다. 대상 및 방법: 가멕스 레이져 시스템(GAMMEX INC, Middleton, WI, USA)이 설치된 PET/CT를 이용하여 비소세포폐암 환자 5명을 대상으로 입체모의치료를 실시하였다. 환자 위치잡이의 재현성을 높이기 위하여 바로누운자세(supine)에서 환자고정용구(Extended Wing Board)를 사용하여 환자를 고정하였다. 획득한 영상은 치료계획시스템(Eclipse V10. Varian, USA)에서 CT, PET, 융합한 PET/CT에 GTV를 묘사하여 비교하였다. 결 과: 무기폐(atelectasis)나 폐렴(Pneumonitis)과 같은 합병증을 동반한 비소세포폐암 환자 5명에 대해 CT에 대한 PET의 GTV는 각각 10.5%, 11.8% 감소하였으나 67.9%, 220%, 19.4% 증가하였다. CT에 대한 PET/CT의 GTV는 각각 7.7%, 6.7%, 28% 감소하였으나 232%, 24%증가하였다. 결 론: FDG를 이용한 비소세포폐암 환자의 PET/CT 전산화 모의치료기는 GTV 묘사를 통하여 종양의 경계를 명확히 해주고 불확실한 표적체적을 정의하는데 CT보다 유용하여 앞으로 다른 부위에 추가 적용 가능할 것으로 보인다.

• 수산해양기술연구
• /
• 제38권3호
• /
• pp.249-255
• /
• 2002

소형 레이더 신호를 정량적으로 분석하여 해상물표의 운동정보를 실시간으로 추출 및 표시하기 위한 radar target extractor(RTX)를 개발하고, 이 장치를 소형 레이더 장치에 부착시켜 소형 연근해 어선에서도 타선의 진운동정보나 충돌회피정보와 같은 각종의 항해정보를 활용토록 하기 위한 연구를 수행하였다. 본 연구에서 개발한 RTX는 IBM PC 의 ISA bus를 통해 데이터를 입출력할 수 있도록 설계된 신호처리장치로서, 일반 선박용 레이더에서 출력되는 video signal, trigger, antenna bearing pulse, antenna heading mark를 직접 입력할 수 있도록 하였다. 이 장치는 레이더 펄스신호가 해상에 존재하는 물표로부터 반사되어 수신될 때, 그 물표의 신호정보 및 위치좌표정보를 PC 의 CPU 에 의해 처리하지 않고 RTX 자체에 내장된 전용 DSP를 이용하여 실시간으로 처리하도록 하였다. 이 장치에 서 video 신호는 analog devices 사의 AD9042 (12 bit, 40 MHZ monolithic A/D converter)를 이용하여 digital 신호로 변환되고, 그 화상 신호는 CRT에 PPI 방식으로 표시되었다. 이 때 안테나가 회전하면서 탐지한 레이더 물표의 echo 신호는 echo 신호의 강도가 증가하면서 다른 물표의 위치와 구별되면 하나의 물표로서 판정한다. 이 경우, 표적식별 알고리즘은 물표가 미리 설정한 물표포착영역(target acquiring zone)내에 있고, 해당 물표의 크기와 다른 물표와의 거리등에 대한 데이터가 식별기준을 만족하는가에 대한 처리를 수행하도록 개발되었다. 본 연구는 현재 소형어선에 탑재되고 있는 소형레이더의 성능 향상에 크게 기여할 것으로 판단되고, 또한 소형어선용 저가형 ARPA 시스템의 국산화에 필요한 기반기술을 제공할 수 있을 것으로 판단된다.

• 수산해양기술연구
• /
• 제31권2호
• /
• pp.142-152
• /
• 1995

우리나라 연근해 해역에 대한 어족생물의 자원평가 및 그 관리를 위한 기초자료를 수집하기 위한 연구의 일환으로 동중국해를 대상으로 계량어군탐지기 및 트롤조업에 의해 수집된 어족생물의 음향학적 조사자료 및 수조실험자료 등을 종합적으로 분석하여 조사대상해역에 대한 어족생물의 어군반사강도를 추정한 결과를 요약하면 다음과 같다. 1. 1994년 4월에 제주도 남서방 해역에서 50kHz의 주파수에 대하여 측정한 트롤 예망층에 대한 어군의 평균체적산란강도(, dB)와 그 때의 트롤조업에 의해 어획한 단위체적당의 어획량(C, $kg/\textrm{m}^3$)과의 사이에는 다음의 회귀직선식을 얻었다. = -32.4+10Log(C) 이 식에서 어획물 1kg당에 대한 어군의 평균반사강도의 추정치는 = - 32.4dB/kg이었다. 2. 1989~1992년의 11월중에 동중국해에서 25kHz와 100kHz의 주파수에 대한 트롤 예망층의 평균체적산란강도(, dB)와 단위체적당의 어획량(C, $kg/\textrm{m}^3$)과의 사이에는 다음의 회귀직선식을 얻었다. 25kHz : = - 29.8+10Log(C) 100kHz : = - 31.7+10Log(C) 이들 식에서 25kHz와 100kHz의 주파수에 대한 어획물 1kg당에 대한 어군의 평균반사강도의 추정치는 각각 -29.8dB/kg, -3.7dB/kg으로서, 25kHz에 대한 어군반사강도의 값이 100kHz에 대한 그 값보다 1.9dB 더 컸다. 3. 트롤조업에 의해 어획한 강달이, 말쥐치, 갈전갱이, 민태, 병어, 황돔, 민어, 고등어, 샛돔, 전갱이 등을 대상으로 25kHz와 100kHz의 주파수에서 측정한 어체의 평균반사강도와 체중과의 사이에는 다음의 회귀직선식을 얻었다. 25kHz : TS = - 34.0+10Log($W^{\frac{2}{3}}$) 100kHz : TS = - 37.8+10Log($W^{\frac{2}{3}}$) 이들 식에서 25 kHz와 100kHz의 주파수에 대한 어체의 1kg 당에 대한 평균반사강도의 측정치는 각각 -34.0dB/kg, -37.8dB/kg로서, 25kHz에 대한 어체의 평균반사강도의 값이 100kHz에 대한 그 값보다 3.8dB 더 컸다. 4. 제주도 근해에서 어획한 보구치의 부레의 등가반경(A)에 대한 체장(L)의 비솔(A/L)는 체장이 증감함에 따라 약간 감소하는 경향을 보였고, 그 평균치은 0.089이었다. 이상의 트롤조업 및 어탐조사, 또한 실험수조에서 측정한 어체의 반사강도를 종합적으로 고찰 할 때, 동중국해의 어업자원을 평가함에 있어 적용 할 수 있는 어군 1kg당에 대한 평균적인 반사강도는 25kHz와 100kHz의 주파수에 대하여 각각 -31.4dB/kg, -33.8dB/kg이라고 추정된다.

• 수산해양기술연구
• /
• 제35권3호
• /
• pp.301-311
• /
• 1999

The investigation to evaluate the possible effects of fish behaviour on acoustic target strength was carried out during the 1997 and 1998 hydroacoustic-demersal trawl surveys in the southern waters of Korea.The swimming speed and the target strength of individual, acoustically resolved fished swimming through the sound beam were measured using the split-beam tracking method on board R/V Kaya.The results obtained can be summarized as follows:1. The alongship and athwartship angles between -3dB poionts of a hull mounted 38 kHz split beam tranducer used in these surveys was >$3.76^{\circ}\;and\;6.74^{\circ}$ respectively, and the equal energy contour obtained from the measured beam pattern showed approximately the circular pattern. 2. The swimming speed measured off the south coast of Sorido in 23 January 1997 ranged 0.10 to 0.80 m/s with the average swimming spped of 0.36 m/s, and the target strength ranged -64.8 to -31.7 dB with the average target strength of -52.7 dB. The most dominant species sampled in this survey area were Japanese scaled sardine, Sardinella zunasi and Konoshiro gizzard shad, Konosirus punctatus, respectively.3. The swimming speed measured off the east coast of Kojedo in 24 March 1997 ranged 0.10 to 1.10 m/s with the average swimming speed of 0.40 m/s, and the target strength ranged -64.8 to -51.5 dB with the average target strength of -59.2 dB. The most dominant species sampled in this survey area were Swordtip squid, Photololigo edulis, Konoshiro gizzard shad and Japanese flying squid, Toddarodes pacificus, respectively and the swimming activity of these species seems to be controlled at speeds between 0.20 and 0.60 m/s. 4. The swimming speed measured the south coast of Kojedo in 25 March 1997 ranged 0.10 to 1.40 m/s with the average swimming speed of 0.51 m/s and the target strength ranged -64.3 to -47.7 dB with the average target strength of -55.1 dB. The most dominant species sampled in this survey area were Swordtip squid, Blotchy sillage, Sillago maculata and japanese scaled sardine, respectively and the swimming activity of these species seems to be controlled at speeds between 0.20 and 0.70 m/s.5. The swimming speed measured during morning twilight in the southeastern water of Cheju Island in 11 July 1998 ranged 0.20 to 1.0 m/s with the average swimming speed of 0.53 m/s, and the target strength ranged -65.0 to -47.0 dB with the average target strength of -57.1 dB. The most dominant species sampled in this survey area were Swordtip squid, Black scraper, Thamnaconus modesutus and japanese flying squid, respectively and the tile angle ranged$ +28^{\circ}\;to\;+2^{\circ}$ with the average tilt angle of -8.1$^{\circ}$ showing the downward migration.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.388-390
• /
• 2004

In this paper, we performed the implementation of image transmission server system using embedded system that is for the specified object and easy to install at any places and move to wherever. Since the embedded system has lower capability than PC, we have to reduce the quantity of calculation and transmission. The image compression like JPEG, needs that the server calculates for making compressed image, makes the server carry the load. So we compresses the image at the server and transmit the codes to the clients connected, then the received codes from server are decoded and displayed at the clients. In this process to make the image compression and transmission effectively, we decrease the procedure as simple as possible to transmit the data in almost real-time. We used the Redhat linux 9.0 OS at the host PC and the target board based on embedded linux. The image sequences are obtained from the camera attached to the FPGA board with ALTERA chip. For effectiveness and avoiding some constraints, we made the device driver. Generally the image transmission server is PC, but using the embedded system as a server makes the server portable and cheaper than the system based on PC.

• Journal of Electrical Engineering and Technology
• /
• 제9권6호
• /
• pp.1795-1804
• /
• 2014

Owing to the reduction in the peak power of a DC railway subsystem, many studies on energy storage system (ESS) applications have received attention. Each application focuses on improving the efficiency and addressing regulation issues by utilizing the huge regenerative energy generated by braking-phase vehicles. The ESS applications are widely divided into installation on a vehicle or in a substation, depending on the target system characteristics. As the main purpose of the ESS application is to reduce the peak power of starting-phase vehicles, an optimized ESS utilization can be achieved by the operating at the highest peak power section. However, the weight of an entire vehicle, including those of the passengers, continuously changes during operation; thus, considering the total power consumption and the discharging point is difficult. As a contribution to the various storage device algorithms, this study deals with ESS on board vehicles and introduces an ESS operating plan for peak-power reduction by investigating the weight of a train on a real-time basis. This process is performed using a train-performance simulator, and the simulation accuracy can be increased because the weight in each phase can be adopted in the simulation.

• 전기학회논문지P
• /
• 제67권2호
• /
• pp.75-81
• /
• 2018

In this paper for developing and implementing the car driver's front lane attention enhancement developed system using the car camera. The developed system automatically alarm the car driver when front cars make the dangerous situation. We use Raspberry Pi camera module V2 as car camera module, Raspberry Pi 3 board as hardware main board of implementing embedded system and develop the application library module which can be operated on the Raspberry situation. The application library module widely consist of two part, front car recognition part and dangerous situation distinguish part. Our developed system satisfy the performance test of the target system at the software test certification laboratory of TTA(Telecommunication Technology Association). We test four items as attentive car recognition ability at day and night, system performance, response time. We get the performance of developed system based on the four goal. The car driver's front lane attention enhancement system in this paper will be widely used at the ADAS(Advanced Driving Assistance System) because of the better performance and function.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.393-396
• /
• 2008

Propellant consumption control for space launch vehicle can be achieved by propellant utilization system (PUS) and tank depletion system (TDS). In the course of developing new space launch vehicles, the main target of design is on reducing of space launch vehicle weight, which results in increasing both specific impulse and payload weight. The weights of space launch vehicles are generally allocated to structure, propulsion system, and propellants loaded. The quantity of propellants filled in propellant tanks may be estimated with the propellants actually consumed by propulsion system to complete its mission and the propellants left on-board at the time of engine shut-off. To minimize the remaining quantity of propellants on-board the supplying propellants' O/F ratio should be controlled from the certain time before engine shutdown. To control an O/F ratio, a control system, which accurately measures and compares the remainder of propellants in tanks and pipes, should be needed. This paper solely dedicates its contents to explore the merits and demerits of various level sensor, which is one of the important elements for PUS and TDS, and the transmission and control of signals within space launch vehicle.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2007년도 Proceedings of ISRS 2007
• /
• pp.504-507
• /
• 2007

The KOMPSAT-2 satellite is a push-broom system with MSC (Multi Spectral Camera) which contains a panchromatic band and four multi-spectral bands covering the spectral range from 450nm to 900nm. The PAN band is composed of six CCD array with 2528 pixels. And the MS band has one CCD array with 3792 pixels. Raw imagery generated from a push-broom sensor contains vertical streaks caused by variability in detector response, variability in lens falloff, pixel area, output amplifiers and especially electrical gain and offset. Relative radiometric calibration is necessary to account for the detector-to-detector non-uniformity in this raw imagery. Non-uniformity correction (NUC) is that the process of performing on-board relative correction of gain and offset for each pixel to improve data compressibility and to reduce banding and streaking from aggregation or re-sampling in the imagery. A relative gain and offset are calculated for each detector using scenes from uniform target area such as a large desert, forest, sea. In the NUC of KOMPSAT-2, The NUC table for each pixel are divided as HF NUC (high frequency NUC) and LF NUC (low frequency NUC) to apply to few restricted facts in the operating system ofKOMPSAT-2. This work presents the algorithm and process of NUC table generation and shows the imagery to compare with and without calibration.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제5권1호
• /
• pp.13-22
• /
• 2002

Stink bug, Canthecona furcellatta (Hemiptera: Pentatomidae), is an important predator of silkworm larvae. Nymphs and adult attack the early stage silkworm larvae and causes about 10-15 per cent loss to silk industry. Synthetic organic pesticides has tremendous impact on minimizing the pest population but repeated and frequent use has created problems of residual toxicity, development of resistance to insecticides, pest resurgence and out break, phyto-toxicity and hazards to non target species and beneficial organism. Silkworms are very sensitive to pesticides; therefore, attempt has made to control the bug population through introduction of its native natural enemies in the silkworm-rearing field. Biological control has tremendous scope in sericulture because it is eco-friendly in nature and non-harmful farmers. Native natural enemies have been screened. Psix striaticeps, Trissolcus spp. and Telenomus spp. have been recorded as the most potential parasitoid against pentatomid bug. Life cycle, sex ratio and other various attributes of the par-asitoids have been recorded. The parasitization potential of the parasitoid is very high and they have the ability to discriminate between parasitized and unpar-asitized host. Mass propopagation technique under laboratory condition has been standaydized.