• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.479-484
• /
• 2007

Recently China has carried out a successful anti-satellite missile test at more than 850km altitude January 11 destroying an aging Chinese weather satellite target with a kinetic kill vehicle launched on board a ballistic missile. Korea has developed scientific and commercial satellites and sounding rockets from 1990s. As the fear of the militarisation of space becomes the reality, we need to consider the safety of our space assets from the perspectives of design, operation, and policy. In this paper we study on the general meanings and impacts of Chinese anti-satellite missile test and the measure to protect our space assets from the points of the design, operation and policy.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.22 no.1
• /
• pp.1-8
• /
• 2004

The key points of the CTP board is as follows: Film, brightness, plate exposure is eliminated, the reduction of personal expenses, and the reduction of time consumption. But above all, the accurate reappearance of the highlighting and shadow portion as well as self modification of the dust edge portion stands out as the most impressive improvements. In this paper, using a digital test from 4.0 and a Thermal CTP color printing control, the two parts of the Thermal CTP utilized a 1%-99% dot reappearance. Also, using an opposite line target, the results of the CTP plates and printing were compared. Finally, research was made on the printing quality on the slur development of the plate and the result when there was a lack of weave connection.

• Proceedings of the KIEE Conference
• /
• 2005.05a
• /
• pp.182-184
• /
• 2005

An embedded system has been applied to many fields including households and industrial sites. The embedded system is implemented fur image tracking in security area. This system supports a fixed IP far the reliable server operation on TCP/IP networks. A real time video image on the is analyzed to detect a certain invader who jumped into the observed area. The digital camera is connected at the USB host port of the target board. The video images from the video camera is continuously analyzed and displayed at the Linux web-server. The moving vector of the invaders on the continuous image frames is calculated and then it sends the calculated pan/tilt movement. That used Block matching algorithm and edge detection algorithm for past speed. And the displacement vector is used at pan/tilt motor control through RS232 serial cable. The experiment result showed tracking performance by the moving part speed of 10 to 150 pixels/sec.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.8-11
• /
• 1996

In one VTR(Video Tape Recorder), two or more heads are used to record or reproduce video signals. To obtain a uniform quality of a VTR, video heads should have similar charcteristics such as geometrical shapes and electro-magnetic performances. This research is aimed to develop a visual inspection system that can measure four geoemtrical parameters;HO, HI, Tw and Cw. To obtain a high realable results, DSP based image board and target based image processing algorithms were used. A series of experiments was performed for one thousands of video heads. From observation of the experimental results, the system is found to show good performance for inspection of video heads.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1550-1552
• /
• 2005

In this paper, we have designed a Fingerprint Recognition System based on the Embedded LINUX. The fingerprint is captured using the AS-S2 semiconductor sensor. To extract a feature vector we transform the image of the fingerprint into a column vector. The image is row-wise filtered with the low-pass filter of the Haar wavelet. The feature vectors of the different fingerprints are compared by computing with the probabilistic neural network the distance between the target feature vector and the stored feature vectors in advance. The system implemented consists of a server PC based on the LINUX and a client based on the Embedded LINUX. The client is a Tynux box-x board using a PXA-255 CPU. The algorithm is simple and fast in computing and comparing the fingerprints.

• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.2
• /
• pp.60.2-60.2
• /
• 2016

We present recent results of very long baseline interferometry (VLBI) observations of gamma-ray bright active galactic nuclei (AGNs) using Korean VLBI Network (KVN) at 22, 43, 86, and 129~GHz bands, which are part of a KVN key science program; Interferometric Monitoring of Gamma-ray Bright AGNs (iMOGABA). We selected a total of 34 radio-loud AGNs of which 30 sources are gamma-ray bright AGNs, including 24 sources monitored by the Fermi Gamma-ray Space Telescope using the Large Area Telescope on board. The selected sources consist of 24 quasars, 7 BL Lacs, and 3 radio galaxies. In this talk, we summarize recent results of the iMOGABA, including results of single-epoch multi-frequency VLBI observations of the target sources, conducted during a 24-hr session on 2013 November 19 and 20. All observed sources were detected and imaged at all frequency bands with or without a frequency phase transfer technique which enabled to detect and image 12 faint sources at 129 GHz, except for 0218+357 which was detected for only one baseline at all frequency bands.

• Transactions of The Korea Fluid Power Systems Society
• /
• v.8 no.2
• /
• pp.1-7
• /
• 2011

An inverted pendulum mounted on a cart and actuated by a hydraulic servo cylinder was designed and built. Position information of the cart was acquired via a potentiometer and a angle of the pendulum was sensed by an incremental encoder. These were collected by a DAQ board and processed through the Real-Time Windows Target software(included in simulink). A simulink graphical program was implemented as a controller of the hydraulic system that governed the motion of the cart in order to maintain vertical balance of the inverted pendulum. The purpose of this study is to develop an electro-hydraulic inverted pendulum system for a modeling and controling the intrinsic unstable system. The simulation results were compared with the experimental and verified.

• Proceedings of the KIEE Conference
• /
• 2001.11c
• /
• pp.406-408
• /
• 2001

In this thesis, a video tracker with a TMS320C31 DSP is designed and implemented. It is intended to work with PC through PCI Bus and can be used in real-time applications. The DSP board is capable of grabbing image data from camera, and calculating the position of a target, and tracking its movement. The tracking situation can be displayed in a PC monitor and displacement of the movement is fed back to pan and tilt the camera. Experimental results show that the tracker implemented here works well in real applications.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.204-206
• /
• 2005

In this paper, we have designed a Fingerprint Recognition System based on the Embedded LINUX. The fingerprint is captured using the AS-S2 semiconductor sensor. To extract a feature vector we transform the image of t10he fingerprint into a column vector. The image is row-wise filtered with the low-pass filter of the Haar wavelet. The feature vectors of the different fingerprints are compared by computing with the probabilistic neural network the distance between the target feature vector and the stored feature vectors in advance. The system implemented consists of a server PC based on the LINUX and a client based on the Embedded LINUX. The client is a Tynux box-x board using a PXA-255 CPU. The algorithm is simple and fast in computing and comparing the fingerprints.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.3 s.96
• /
• pp.329-333
• /
• 2005

This paper is concerned with the measurement of low-frequency vibrations of structures using the image processing method. To measure the vibrations visually, the measurement system consists of a camera, an image grabber board, and a computer. The specific target installed on the structure is used to calculate the vibration of structure. The captured image is then converted into a pixel-based data and then analyzed numerically. The limitation of the system depends on the image capturing speed and the size of image. In this paper, we propose the methodology for the vibration measurement using the image processing method. The method enables us to measure the displacement directly without any contact. The current resolution of the vibration measurement is limited to sub centimeter scale. However, the frequency bandwidth and resolution can be enhanced by a high-speed and high-resolution image processing system.