• Journal of the Korea Institute of Military Science and Technology
• /
• v.16 no.3
• /
• pp.255-259
• /
• 2013

To evaluate the suitability of the Weaponeering tool for the Surface to Surface Guided Missile at the Above-Ground Buildings, we analyzed the relation among SSPD, $MAE_{bldg}$, CEP and the number of missiles, expected damage etc.. According to the analysis, if the target Length is 100m, and $\sqrt{MAE_{bldg}}$ is longer than the target length, the tool is suitable but shorter than it, the tool is not suitable. So Morris Driels's Weaponeering Tool needs new adaptive algorithm to Translate as the Target size and $MAE_{bldg}$.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.16 no.3
• /
• pp.398-404
• /
• 2013

The simulation of the ballistic trajectory of penetrator into the spaced multi-layer RC targets is very important to predict the hitting condition in subsequent target. Because of perturbation by lateral load of penetrator caused by asymmetric hitting position between penetrator and steel bar reinforcement, penetrator rotates and deviates from the straight path. Therefore, penetration capability of penetrator is decreased in the subsequent targets. This paper presents the result of the penetration of steel-bar-reinforced concrete target by using the explicit finite element code LS-DYNA. A series of computations is performed and compared to experimental data and the computed results are in good agreement with the experimental results over a wide range of velocities. And then we conduct the simulation according to various RC target hitting condition and impact velocities.

• Journal of Mechanical Science and Technology
• /
• v.16 no.6
• /
• pp.770-775
• /
• 2002

In this paper, a game optimal receding horizon guidance law (GRHG) is proposed, which does not use information of the time-to-go and target maneuvers. It is shown that by adjusting design parameters appropriately, the proposed GRHG is identical to the existing receding horizon guidance law (RHG), which can intercept the target by keeping the relative vertical separation less than the given value, within which the warhead of the missile is detonated, after the appropriately selected time in the presence of arbitrary target maneuvers and initial relative vertical separation rates between the target and missile. Through a simulation study, the performance of the GRHG is illustrated and compared with that of the existing optimal guidance law (OGL).

• Journal of the Korea Institute of Military Science and Technology
• /
• v.11 no.6
• /
• pp.5-13
• /
• 2008

A smart submunition drops through the expected trajectory to have a appropriate target searching footprint for the armored ground vehicles. Parachutes can be used as a tool to decelerate and spin the submunition. Usually submunition's descent velocity, spin rate, submunition inclination angle against vertical and dynamic stability affect to its target searching footprint. Therefore it is important to design optimal parachute and load configuration for the overall system performance. In this paper we described the dynamic motion of submunition by the mathematical model of parachute and load. Through the computer simulation we can analyze the submunition footprint affected by parachute and load design.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.3 no.1
• /
• pp.85-91
• /
• 2000

Underwater sensor accuracy test which measures the detection range and bearing accuracies of sonar simulates sonar transmitting ping and underwater radiating noise of target vessels. In this test, because the position of sonar target is the reference position of test, the sonar target position should be precisely estimated. Hence, this paper suggests to apply USBL algorithm which adopts cross phase spectrum of received sensor signals, and presents its performance by range and bearing estimation simulations. As a result of simulations, suggested algorithm shows good accuracy for underwater sensor accuracy test near 5㏈ SNR.

• Journal of Institute of Control, Robotics and Systems
• /
• v.5 no.6
• /
• pp.764-776
• /
• 1999

In this paper, a tracking algorithm for a maneuvering single target in the presence of multiple data from multiple sensors is investigated. Allowing individual sensors to function by themselves, the estimates from individual sensors on the same target are fused for the purpose of improving the state estimate. The filtering method adopted in the local sensors is the variable dimensional filter with input estimatio technique, which consists of a constant velocity model and a constant acceleration model. A posteriori probability for the maneuvering hypothesis is newly derived. It is shown that the relation function of the a posteriori probability is a function of only the covariance of the fused estimates. Simulation results are provided.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.12 no.5
• /
• pp.652-659
• /
• 2009

To analyze and verify the performance of a pulse radar without the real target data, there is a need to make the simulated signal which is similar to the received signal of the real target. In this paper, a method of the received signal generation for the pulse radar is proposed to solve the above need. The user-made scenarios are used to model the fast and small target and the clutter data based on the ground environment. These data are transformed into the electric signal using the proposed method. The efficiency of the proposed method is proved by comparing the signal of a field test with the simulated signal.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.20 no.3
• /
• pp.441-453
• /
• 2017

In this paper, a new type of weapon-target assignment(WTA) problem has been suggested that reflects realistic constraints for sharing target with other weapons and shooting double rapid fire. To utilize in rapidly changing actual battle field, the computation time is of great importance. Several metaheuristic methods such as Simulated Annealing, Tabu Search, Genetic Algorithm, Ant Colony Optimization, and Particle Swarm Optimization have been applied to the real-time WTA in order to find a near optimal solution. A case study with a large number of targets in consideration of the practical cases has been analyzed by the objective value of each algorithm.

• Applied Science and Convergence Technology
• /
• v.24 no.6
• /
• pp.284-288
• /
• 2015

Anionic small molecules are hard to penetrate the cell membranes because of their negative charges. Encapsulation of small molecules into liposome particles can provide target specific delivery of them. In our previous study, siRNA could be efficiently encapsulated into liposome particles using an asymmetric preparation method of liposomes. In this study, the same method was applied for encapsulation of small anionic fluorescent chemicals such as calcein and indocyanine green (ICG). More than 90% fluorescent chemicals were encapsulated in the asymmetric liposome particles (ALPs). No intracellular fluorescent signal was observed in the tumor cells treated with the unmodified calcein/ALPs and ICG/ALPs, whereas the surface modification with a cell-penetrating polyarginine peptide (R8 or R12) allows cellular uptake of the ALPs. The results demonstrate that the ALPs encapsulating small anionic drugs will be useful for target-specific delivery after modification of target-specific ligands.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2006.05a
• /
• pp.269-272
• /
• 2006

Surface contacts between mold and target should be in parallel for the imprinting mechanism. However, the size of contacting area makes it difficult for both mating surfaces to be in all contact because of precision level of the imprinting machine and the waviness of mold and target. The gripping force for both mold and target with the vacuum chuck is also major effect to interrupt the full contact, which must be avoided in imprinting mechanism. In this study, the preliminary study for the causes of non-uniformity of contacting surfaces such as mold and target is performed with $470{\times}370mm^2$ LCD panel size.