• 대한임베디드공학회논문지
• /
• 제13권6호
• /
• pp.321-328
• /
• 2018

This paper presents an automatic target tracking flight system using a PID controller based on velocity command of a multirotor UAV. The automatic flight system includes marker based onboard target detection and an automatic velocity command generation replacing manual controller. A quad-rotor UAV is equipped with a camera and an image processing computer to detect the marker in real time and to estimate the relative distance from the target. The marker tracking system consists of PID controller and generates velocity command based on the relative distance. The generated velocity command is used as the input of the UAV's original flight controller. The operation of the proposed system was verified through actual flight tests using a marker on top of a moving vehicle and tracks it to successfully demonstrate its capability using a quad-rotor UAV.

• 로봇학회논문지
• /
• 제13권4호
• /
• pp.213-219
• /
• 2018

In this paper, we introduce a target position reasoning system based on Bayesian network that selects destinations of robots on a map to explore compound disaster environments. Compound disaster accidents have hazardous conditions because of a low visibility and a high temperature. Before firefighters enter the environment, the robots notify information in advance, such as victim's positions, number of victims, and status of debris of building. The problem of the previous system is that the system requires a target position to operate the robots and the firefighter need to learn how to use the robot. However, selecting the target position is not easy because of the information gap between eyewitness accounts and map coordinates. In addition, learning the technique how to use the robots needs a lot of time and money. The proposed system infers the target area using Bayesian network and selects proper x, y coordinates on the map based on image processing methods of the map. To verify the proposed system, we designed three example scenarios based on eyewetinees testimonies and compared time consumption between human and the system. In addition, we evaluate the system usability by 40 subjects.

• Journal of the Optical Society of Korea
• /
• 제8권4호
• /
• pp.174-181
• /
• 2004

Various kinds of systems, that can do target recognition and position detection simultaneously by using infrared sensing detectors, have been developed. In this paper, the detection system TRSS (Thermal target Recognition by Spiral Scanning) adopts linear array shaped uncooled IR detector and uses spiral type fast scanning method for relative position detection of target objects, which radiate an IR region wavelength spectrum. It can detect thermal energy radiating from a 9 m-size target object as far as 200 m distance. And the maximum field of a detector is fully filled with the same size of target object at the minimum approaching distance 50 m. We investigate two types of lens systems. One is a singlet lens and the other is a doublet lens system. Every system includes one aspheric surface and free positioned aperture stop. Many designs of F/1.5 system with ${\pm}5.2^{\circ}$ field at the Efl=20, 30 mm conditions for single element and double elements lens system respectively are compared in their resolution performance [MTF] according to the aspheric surface and stop position changing on their optimization process. Optimum design is established including mechanical boundary conditions and manufacturing considerations.

• Journal of electromagnetic engineering and science
• /
• 제11권3호
• /
• pp.213-219
• /
• 2011

Simulative target generators are needed for testing and calibrating various radar systems. The generator in this study discriminates the transmitting frequency from a radar and simulates parameters like target range, range rate, and atmospheric attenuation using the digital RF memory technique. The simulative target echo is then sent to the radar for testing and evaluation. This paper proposes a novel architecture for controlling the digital RF memory so it continually writes ADC data to the memory and reads it for the DAC with increasing one step address in order to control the delay of target range in a simple way. The target echo is programmed according to various preprogrammed scenarios and is generated in real time using a wireless local area network (LAN). To analyze the detected and generated target information easily, the system times for the radar and simulative target generator are synchronized using a global positioning system (GPS).

• 한국항공우주학회지
• /
• 제45권7호
• /
• pp.600-609
• /
• 2017

탐색기의 센서 영상을 이용하여 최종 표적에 대한 선정을 수동 또는 자동으로 할 수 있는 표적 관리 모의 시스템을 개발하였다. 모의 시스템은 비행체 시스템과 지상 시스템으로 구성하였다. 비행체 시스템은 비행체의 운동역학과 센서 영상을 모의하고 지상 시스템은 표적 템플릿 모의와 지상 제어기를 모의를 수행한다. 비행체의 운동역학은 의사 6자유도를 기반으로 비례항법유도기법을 사용한다. 탐색기의 센서 영상은 알려진 적외선 영상 렌더링 기법을 이용하여 직접 개발하였으며 상용 프로그램과 비교하여 검증하였다. 지상제어기는 사용자 편의를 위해 임무에 관련된 정보를 가능한 많이 전시할 수 있는 사용자 인터페이스로 구성하였다. 최종적으로 표적 격추 임무 모의를 통해 요구하는 성능에 만족함을 확인하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.367-371
• /
• 2004

This paper describes development of automatic flight control system for an unmanned target drone which is operated by Korean army as for anti-air gun shooting training. Current target drone is operated by pilot control of on-board servo motor via remote control system. Automatic flight control system for the target drone greatly reduces work load of ground pilot and can increase application area of the drone. Most UAVs being operated now days use high-priced sensors as AHRS and IMU to measure the attitude, but those are costly. This paper introduces the development of low-cost automatic flight control system with low-cost sensors. The integrated automatic flight control system has been developed by integrating combining power module, switching module, monitoring module and RC receiver as an one module. The performance of automatic flight control system is verified by flight test.

• Current Optics and Photonics
• /
• 제7권6호
• /
• pp.745-754
• /
• 2023

In order to test the recognition ability and accuracy of a target imaging simulator under the irradiation of solar stray light in a laboratory environment, it needs to be fixed on a five-axis turntable during a hardware-in-the-loop simulation test, so the optical system of the simulator should have a long exit pupil distance. This article adopts a secondary imaging method to design a projection optical system suitable for thin-film-transistor liquid crystal displays. The exit pupil distance of the entire optical system is 1,000 mm, and the final optimization results in the 400 nm-850 nm band show that the modulation transfer function (MTF) of the optical system is greater than 0.8 at the cutoff frequency of 72 lp/mm, and the distortion of each field of view of the system is less than 0.04%. Combined with the design results of the optical system, TracePro software was used to model the optical system, and the simulation of the target imaging simulator at the magnitude of -1 to +6 Mv was analyzed and verified. The magnitude error is less than 0.2 Mv, and the irradiance uniformity of the exit pupil surface is greater than 90%, which meets the requirements of the target imaging simulator.

• 디지털산업정보학회논문지
• /
• 제10권4호
• /
• pp.71-78
• /
• 2014

Method a target estimation in spatial are mobile wireless communication using network cell and GPS. It have much error that mobile wireless communication depend on cell size. GPS method can't find a target in shadow and inner area. In this paper, we estimate a target as direction of arrival method using adaptive array antenna system. Adaptive array antenna system can obtain desired signal to remove other signal This paper studied digital beamforming method in order to estimation a target. Proposed method is modified optimum weight and antenna error correction to estimation an optimal receive signal. Digital beamforming method decided a signal phase and amplitude from received signal on array antenna element. But if it is not to do error correction of received signal, system performance have decreased. Firstly, we proposed modified optimum weight in order to finding desired target. Secondly, we are error correction of antenna incident signals by optimal weight before digital beamforming method. Thirdly, throughly simulation, we showed that system performance of proposed method compare proposal method with general method. It have improved resolution of estimation target to good performance more proposed method than general method.

• 한국컴퓨터산업학회논문지
• /
• 제6권3호
• /
• pp.509-518
• /
• 2005

원격 모니터링 시스템(RMS; Remote Monitoring System)은 산업의 자동화 과정에 따라 다양한 분야에 적용되고 있으며, 단순한 상태 감시기능에서 멀티미디어 인터페이스 기반의 실시간 제어 기능을 갖는 복합 응용시스템으로 발전하고 있는 추세이다. 본 연구에서는 네트워크로 연동된 원격 사이트의 타겟 시스템(target system)을 클라이언트의 웹 브라우저에서 모니터링 할 수 있는 감시기능과 특정 동작을 제어할 수 있는 제어기능을 갖는 웹 기반 모니터링 시스템을 개발하였다. 개발 시스템은 클라이언트가 웹 브라우저에서 타겟 시스템의 상태를 실시간으로 감시할 수 있는 모니터링 기능, 클라이언트가 모니터링 화면에서 특정 모듈의 값을 설정함으로써 시스템의 상태를 제어하는 출력제어 기능, 클라이언트가 웹 환경에서 타겟 시스템의 환경 변수를 직접 설정 또는 변경할 수 있는 환경설정 기능, 네트워크에 연동된 화상카메라를 이용하여 타겟 시스템 주변 환경을 비디오로 감시할 수 있는 비디오 감시기능 등으로 구성되어 있다. 본 RMS는 웹 기반의 인터페이스로 타겟 시스템에 쉽게 접근 및 관리가 가능하며, 특히, 무인 자동화 설비 및 폐쇄 공간 등에서 유용하게 활용될 수 있다.

• 한국군사과학기술학회지
• /
• 제6권3호
• /
• pp.36-43
• /
• 2003

Multi-target away signal simulator which can simulate the radiated noises of maneuvering targets in a specified ocean range is an essential equipment for the validation of developed towed array sonar system. This simulator should provide realistic multi-channel signals those are required for beamforming on the signal processing unit of towed away system. This paper describes the overall system configuration and signal synthesis techniques for the target radiated noise. And this paper considers why the time delays between target and individual sensors are caused and how to compensate these time delays to individual sensors output. This multi-purpose target simulator could be used for the training of TASS operators.