• Journal of the Korea Institute of Military Science and Technology
• /
• v.2 no.2
• /
• pp.30-39
• /
• 1999

In this paper, we have proposed a novel method which can compose a reflected signal of the underwater target. The synthesis of the reflected signal in the target, the synthesized signal being similar to the characteristics of the reflected signal in the real target, is used the highlight model at the specific points of the target. We suggest the synthesis method of the reflected signal of the target using the pulsewidth variation and each other doppler effect at the highlight point, and compare the composed signal by the proposed method with that by conventional one. Simulation results show that the composed signal using the proposed method and the reflected signal of the real target is similar to the spectral characteristics.

• Journal of Ocean Engineering and Technology
• /
• v.11 no.3
• /
• pp.163-169
• /
• 1997

The simulation of target-scattered echo with the moving sonar platform and target in 3-dimensional ocean environment is essential to validate and evaluate the performance of a sonar system. This paper presents the improved target signal simulation on the basis of the highlight(HL) model and its realtime algorithm. In order to simulate the scattering highlight, the highlight is represented as a directional scatterer. The realtime generation algorithm of the target signal is realized by use of DSP chip, TMS320C40, where the 40 channels are equally separated to form a parallel processing task in 4 processors. The presented realtime-version of target signal simulation can be used as a target signal simulator in the development of ACM(Acoustic Counter Measure) and advanced sonar signal processing techniques.

• Phonetics and Speech Sciences
• /
• v.4 no.3
• /
• pp.103-110
• /
• 2012

In this paper, a target signal detection method using multiple signal classification (MUSIC) algorithm is proposed. The MUSIC algorithm is a subspace-based direction of arrival (DOA) estimation method. Using the inverse of the eigenvalue-weighted eigen spectra, the algorithm detects the DOAs of multiple sources. To apply the algorithm in target signal detection for GSC-based beamforming, we utilize its spectral response for the DOA of the target source in noisy conditions. The performance of the proposed target signal detection method is compared with those of the normalized cross-correlation (NCC), the fixed beamforming, and the power ratio method. Experimental results show that the proposed algorithm significantly outperforms the conventional ones in receiver operating characteristics (ROC) curves.

• International Journal of Internet, Broadcasting and Communication
• /
• v.12 no.3
• /
• pp.1-8
• /
• 2020

This paper studied a method of estimating target information using a radar in wireless communication. Position information on the target can be estimated angle, distance and velocity. The velocity information can be estimated since the Doppler frequency is changed in the moving target. The signal incident on the receiving array antenna is multiplied by the delay time and the reference signal to represent the output signal. This output signal is estimated by applying FFT (Fast Fourier Transform) after calculating signal correlation through correlation integrator. Since the output signal must be calculated within the correlator, it should be processed with the Dwell time. The correlation signal of the correlation integrator outside this Dwell time is indicated by the velocity measurement error. The FFT is applied to the signal that has passed through the correlated integrator in order to estimate the distance of the signal. The Doppler resolution must be improved because the FFT estimates target information using the Doppler information. The Doppler resolution decreases with increasing the integration time. The velocity information estimation should have no spread of the velocity. As a result of the simulation, there was no spread of the target velocity in this study.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.15 no.3
• /
• pp.343-349
• /
• 2012

To detect targets for autonomous navigation of unmanned ground vehicle, mounted sensors are required to work all-weather condition. In this point of view, the FMCW radar is quietly appropriate. In this paper, we present development results of target signal simulator for multi-beam type FMCW radar. A target signal simulator make pseudo target signals which simulates multiple moving targets. And we describe how to make hit information for each target in multi-beam type radar. The developed methods are utilized for target tracking device. Moreover it can be applied to similar target signal simulator.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.3 no.1
• /
• pp.58-65
• /
• 2000

A target signal simulation method for passive sonar systems is introduced. The method uses multirate signal processing techniques to simulate moving target signals in the multi-path sound propagation environment by introducing Lloyd's mirror and Doppler effect. Time and frequency variation of target signal due to the target maneuvering is also considered to provide realistic ship signatures in the LOFAR gram so that the simulated target is used for sonar operator training. Synthesized target characteristics is analyzed and compared with real target signal in terms of interference pattern and frequency variation in the LOFAR gram.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.26 no.3
• /
• pp.246-251
• /
• 2023

RADAR(Radio Detection and Ranging) is an important system for surveillance and reconnaissance by detecting a reflected signal which obtains the range from the radar to the target, and the velocity of the target. The magnitude of the reflected signal varies due to the radar cross section of the target, characteristic of the transmission and reception antenna, distance between the radar and the target, and power and wavelength of the transmitted signal. Thus, the RCS is the important characteristic of the target to determine if the target can be observed by the RADAR system. It is based on the material and shape of the target. We have measured the reflection signal of a simple square-shaped (20 × 20 cm) target made of a new material, a gallium-based liquid metal alloy and compared that of well-known metals including copper, aluminum. The magnitude of reflected signal of the aluminum target was the largest and it was 2.4 times larger than that of the liquid metal target. We also investigated the effect of the shape by measuring reflectance of the F-22 3D model(~1/95 ratio) target covered with/without copper, aluminium, and liquid metal. The largest magnitude of the reflected signal measured from side-view with the copper-covered F-22 model was 2.6 times greater than that of liquid metal. The reflectance study of the liquid metal would be helpful for liquid metal-based frequency selective surface or metamaterials.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.26 no.4
• /
• pp.324-334
• /
• 2023

In this paper, the target simulator for RF signals was developed by using VST(Vector Signal Transceiver) and set by real-time signal processing SW programs. A function to process RF signals using FPGA(Field Programmable Gate Array) board was designed. The system functions capable of data processing, raw signals monitoring, target signals(simulated range, velocity) generating and RF environments data analyzing were implemented. And the characteristics of modulated signal were analyzed in RF environment. All function of programs for processing RF signal have options to store signal data and to manage the data. The validity of the signal simulation was confirmed through verification of simulated signal results.

• International Journal of Internet, Broadcasting and Communication
• /
• v.15 no.3
• /
• pp.8-13
• /
• 2023

We propose a method for removing interference and noise to estimate target information. In wireless channels, information signals are subject to interference and noise, making it is difficult to accurately estimate the desired signal. To estimate the desired information signal, it is essential to remove the noise and interference from the received signal, extracting only the desired signal. If the received signal noise and interference are not removed, the estimated information signal will have a large error in distance and direction, and the exact location of the target cannot be estimated. This study aims to accurately estimate the desired target in space. The objective is to achieve more presice target estimation than existing methods and enhance target resolution.An estimation method is proposed to improve the accuracy of target estimation. The proposed target estimation method obtains optimal weights using linear constraints and the minimum variance method. Through simulation, the performance of the proposed method and the existing method is analyzed. The proposed method successfully estimated all four targets, while the existing method only estimated two targets. The results show that the proposed method has better resolutiopn and superior estimation capability than the existing method.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.2
• /
• pp.44-51
• /
• 2001

This Paper the practical echo signal synthesis model to predict the target strength and signal shape of a submarine for a valuable tool to active sonar engineer. It is based on UTAHID (Underwater TArget by Highlight Distribution) model which is relocated highlight points along to external hull for aspect angle, and synthesized echo signal by modified grouping highlights to internal scatter cloud. Proposed model is analyzed target strength characteristics on various incident pulse length, and synthesis signal signature, target time spreading loss, echo elongation effect and so on. Thus it can be efficiently used in various real systems related to underwater target echo signal synthesis, that is, active sonar, acoustic countermeasure and surveillance system.