• Nuclear Engineering and Technology
• /
• v.41 no.4
• /
• pp.531-544
• /
• 2009

This paper is intended to provide key issues and current research outcomes on accelerator-based Boron Neutron Capture Therapy (BNCT). Accelerator-based neutron sources are efficient to provide epithermal neutron beams for BNCT; hence, much research, worldwide, has focused on the development of components crucial for its realization: neutron-producing targets and cooling equipment, beam-shaping assemblies, and treatment planning systems. Proton beams of 2.5 MeV incident on lithium target results in high yield of neutrons at relatively low energies. Cooling equipment based on submerged jet impingement and micro-channels provide for viable heat removal options. Insofar as beam-shaping assemblies are concerned, moderators containing fluorine or magnesium have the best performance in terms of neutron accumulation in the epithermal energy range during the slowing-down from the high energies. NCT_Plan and SERA systems, which are popular dose distribution analysis tools for BNCT, contain all the required features (i.e., image reconstruction, dose calculations, etc.). However, detailed studies of these systems remain to be done for accurate dose evaluation. Advanced research centered on accelerator-based BNCT is active in Korea as evidenced by the latest research at Hanyang University. There, a new target system and a beam-shaping assembly have been constructed. The performance of these components has been evaluated through comparisons of experimental measurements with simulations. In addition, a new patient-specific treatment planning system, BTPS, has been developed to calculate the deposited dose and radiation flux in human tissue. It is based on MCNPX, and it facilitates BNCT efficient planning based via a user-friendly Graphical User Interface (GUI).

• Journal of the Optical Society of Korea
• /
• v.20 no.3
• /
• pp.407-412
• /
• 2016

We analyzed through numerical simulations the properties of a square beam homogenizer near the target for laser shock peening. The efficiency was calculated near the target by considering the plasma threshold of the metals. We defined the depth of focus of the square beam homogenizer with a given efficiency near the target. Then, we found the relationship between the depth of focus for the laser shock peening and four main parameters of the square beam homogenizer: the plasma threshold of the metal, the number of lenslets in the array-lens, the focal length of the condenser lens and the input beam size.

• Journal of Navigation and Port Research
• /
• v.26 no.2
• /
• pp.199-207
• /
• 2002

Radar Cross Sections(RCS) for the radar targets are measured and their performance characteristics are analyzed through computer simulation. In addition, constructional features for the commercial radar reflectors are investigated. Then, the optimum design condition of a passive-type radar reflector was chosen. The results show that the octahedral-type radar reflector with 10$\lambda$ sized circular plates has best performance in X-band($\lambda$=3.2cm). However, to comply with newly adopted 2000 SOLAS regulations, larger sized circular plate is required to provide at both X-band and S-band.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.4A
• /
• pp.429-438
• /
• 2004

In this paper, a decision-feedback coherent code tracking loop is designed for WCDMA systems and its performance is analyzed in terms of jitter variance considering the effect of phase and symbol estimation errors for both AWGN and fading environments. An analytical closed-form formula for jitter variance is Int derived for AWGN environments as a function of a pulse-shaping filter, timing offset, signal-to-interference ratio, and loop bandwidth while involving the phase estimation error and bit error rate, and the upper bound of jitter variance is derived for fading environments. Finally a second-order coherent code tracking loop is designed with the DPCH frame format #13 of the WCDHA forward link selected as a target system, and its performance is evaluated by the closed-form formula and compared with the simulation results for both AWGN and Rayleigh fading environments.

• Acta Via Serica
• /
• v.6 no.1
• /
• pp.1-30
• /
• 2021

Education is a key element in shaping the worldview of the next generation and determines society's core values, ideology, and basic understanding of human rights. While Kyrgyzstan is a secular state, Islamic education, backed by Arab and Turkish sponsors, continues to increase in popularity with the construction of thousands of mosques and dozens of new Islamic educational institutions. Young women have become an important target for Islamic ideology and Islamic educational institutions seek to introduce a new type of ideal woman who is obedient, submissive, and modest. This research uses curricula content analysis, participant observation, and in-depth interviews with teachers and students to examine the effects of newly introduced Islamic education institutions and concludes that the schools are succeeding in training female Kyrgyz students for sheltered lives of dependency, threatening to fundamentally erode women's rights in the country. Two tasks thus demand the attention of policymakers: preserving Kyrgyzstan's secular state and introducing new interpretations of the Quran, which strengthen support for women's rights among believers.

• The Research Journal of the Costume Culture
• /
• v.30 no.6
• /
• pp.919-932
• /
• 2022

This study analyzed the trends of applications for patents, utility models, and designs related to leggings in order to understand the trend of development of technologies for leggings products that are continuously growing in the fashion market. In this study, trends in patent, utility model, and design applications related to leggings products filed from 2001 to 2020 with the Korean Intellectual Property Office were analyzed. As a result, first, the trends of applications for patents, utility models, and designs by year showed that the applications began to rise from 2006 and increased sharply in the 2010s. Second, applications for patents and utility models were analyzed by subject and, according to the results, the applications for compression shaping functionality were the most frequent, followed by those for construction/sewing, those for accessories and others, those for system/device, and those for multi-functionality. Third, when applications for designs were classified by target for wearing and by type of leggings, applications for general leggings designs were the most frequently filed, followed by applications for: item attachment type leggings, shapewear leggings, leggings for men, leggings for pregnant women, leggings for children, and leggings for the disabled. Although this study is limited to domestic patents, utility models, and design applications, it collected useful information related to leggings products and presented directions for future development.

• Journal of Korean Society for Quality Management
• /
• v.52 no.1
• /
• pp.43-56
• /
• 2024

Purpose: The injection molding process, crucial for plastic shaping, encounters difficulties in sustaining product quality when replacing injection machines. Variations in machine types and outputs between different production lines or factories increase the risk of quality deterioration. In response, the study aims to develop a system that optimally adjusts conditions during the replacement of injection machines linked to molds. Methods: Utilizing a dataset of 12 injection process variables and 52 corresponding sensor variables, a predictive model is crafted using Decision Tree, Random Forest, and XGBoost. Model evaluation is conducted using an 80% training data and a 20% test data split. The dependent variable, classified into five characteristics based on temperature and pressure, guides the prediction model. Bayesian optimization, integrated into the selected model, determines optimal values for process variables during the replacement of injection machines. The iterative convergence of sensor prediction values to the optimum range is visually confirmed, aligning them with the target range. Experimental results validate the proposed approach. Results: Post-experiment analysis indicates the superiority of the XGBoost model across all five characteristics, achieving a combined high performance of 0.81 and a Mean Absolute Error (MAE) of 0.77. The study introduces a method for optimizing initial conditions in the injection process during machine replacement, utilizing Bayesian optimization. This streamlined approach reduces both time and costs, thereby enhancing process efficiency. Conclusion: This research contributes practical insights to the optimization literature, offering valuable guidance for industries seeking streamlined and cost-effective methods for machine replacement in injection molding.

• Journal of Preventive Medicine and Public Health
• /
• v.10 no.1
• /
• pp.34-43
• /
• 1977

This study attempts to examine the performances of Myun Health Workers-the frontline workers in the Korean rural health care delivery system. The time-activity approach was mainly utilized as a measuring tool. This study was undertaken in September 1976 with 35 Myun Health Workers at the Kang Wha County. The pretested time-activity approach sheets were filled out daily for one month by those Myun Health Workers themselves. Statistical means and variances of analysis were utilized for statistical method in comparing some activities and functions converged into time distribution Findings: 1. The workers's average working hours derived in this study is 8 hours and 48 minutes per day, which takes half an hour longer than normal schedule. 2. They spend 56% working hour for direct services, in other words, the main function, 22% for supportive function, and 22% for other activities, the unrelated health services. 3. Considering the total working hours of main function, out-center activity is far more than in-center services with the ratio of 70% to 30% respectively, which proves, therefore, that the main activity of the workers is home visiting. 4. It takes 20 minutes purely for home visiting and takes 14 minutes for transportation. 5. This research also indicates that such factors as characteristics of the health workers and myun influence in shaping the structures of the worker's function and activity: a. The workers whose working site is located in myun office spend 15% among total working hours in carring out official myun activities, which is incidentally unrelated to health services, while the health subcenter have no rooms for administrative jobs for myun office. b. The workers whose office is in health subcenter contribute much time in doing main function and those working in special project distribute more time in performing supportive function. c. The types of workers are another dominant factor to influence the components of worker's functions and activities. MCH workers and MPW I spend much time for manipulating main function. d. MPW II, whose function is reorganized by special project in 2 myuns shows different pattern of time distribution compared to the TB worker orFP worker in the ordinary area. MPW II distributes their time evenly in performing MCH program, T.B. Program, F.P. program and education activity, while the unipurpose workers engage in carring out only their dominant role. e. Another variables which involve the variation of the worker's activity can be illustrated with the variables like target population, size of myun and convenience for transportation, among which the latter two are remarkable factors in determining the time for out-center service.

• Journal of International Area Studies (JIAS)
• /
• v.13 no.1
• /
• pp.107-133
• /
• 2009

International relations in the 21st century is featured by boundless competition among nations to secure sufficient energy resources for achieving economic development. Resource diplomacy, therefore, is competitive in its nature, which is derived from the fact that resources of the globe are limited. Chinese recent economic growth has been possible mainly due to its success in resource diplomacy. The Chinese resource diplomacy has shown two different patterns according to target regions. On the one hand, China has pursued multilateral approach to Central Asia region, by which China aimed to secure energy with joint exploration method in the region. Chinese resource diplomacy toward Africa, on the other hand, has been based on bilateral approach combined with unit-centered economic aid to African nations. This difference in Chinese foreign policy pattern seems to be derived from three factors: namely, Chinese strategic considerations on geopolitical condition, regional security sensitivity, and legacies of Chinese long-time non-alignment diplomacy since the 1950s. Whether China is able to maintain the current pattern of resource diplomacy will be depended on how wisely China pursue its relations with two other global powers: Russia in the Central Asia and the U.S. in Africa. In this regard, the Chinese resource diplomacy is expected to work as determining factor of shaping a pattern of tri-lateral strategic relations among the U.S., Russia, and China. Chinese resource diplomacy thus will determine the future direction of the global politics in terms of strategic arrangement.

• Journal of Intelligence and Information Systems
• /
• v.27 no.1
• /
• pp.129-149
• /
• 2021

Recently, interest in social robots that can socially interact with humans is increasing. Thanks to the development of ICT technology, social robots have become easier to provide personalized services and emotional connection to individuals, and the role of social robots is drawing attention as a means to solve modern social problems and the resulting decline in the quality of individual lives. Along with the interest in social robots, the spread of social robots is also increasing significantly. Many companies are introducing robot products to the market to target various target markets, but so far there is no clear trend leading the market. Accordingly, there are more and more attempts to differentiate robots through the design of social robots. In particular, anthropomorphism has been studied importantly in social robot design, and many approaches have been attempted to anthropomorphize social robots to produce positive effects. However, there is a lack of research that systematically describes the mechanism by which anthropomorphism for social robots is formed. Most of the existing studies have focused on verifying the positive effects of the anthropomorphism of social robots on consumers. In addition, the formation of anthropomorphism of social robots may vary depending on the individual's motivation or temperament, but there are not many studies examining this. A vague understanding of anthropomorphism makes it difficult to derive design optimal points for shaping the anthropomorphism of social robots. The purpose of this study is to verify the mechanism by which the anthropomorphism of social robots is formed. This study confirmed the effect of the human-likeness of social robots(Within-subjects) and the construal level of consumers(Between-subjects) on the formation of anthropomorphism through an experimental study of 3×2 mixed design. Research hypotheses on the mechanism by which anthropomorphism is formed were presented, and the hypotheses were verified by analyzing data from a sample of 206 people. The first hypothesis in this study is that the higher the human-likeness of the robot, the higher the level of anthropomorphism for the robot. Hypothesis 1 was supported by a one-way repeated measures ANOVA and a post hoc test. The second hypothesis in this study is that depending on the construal level of consumers, the effect of human-likeness on the level of anthropomorphism will be different. First, this study predicts that the difference in the level of anthropomorphism as human-likeness increases will be greater under high construal condition than under low construal condition.Second, If the robot has no human-likeness, there will be no difference in the level of anthropomorphism according to the construal level. Thirdly,If the robot has low human-likeness, the low construal level condition will make the robot more anthropomorphic than the high construal level condition. Finally, If the robot has high human-likeness, the high construal levelcondition will make the robot more anthropomorphic than the low construal level condition. We performed two-way repeated measures ANOVA to test these hypotheses, and confirmed that the interaction effect of human-likeness and construal level was significant. Further analysis to specifically confirm interaction effect has also provided results in support of our hypotheses. The analysis shows that the human-likeness of the robot increases the level of anthropomorphism of social robots, and the effect of human-likeness on anthropomorphism varies depending on the construal level of consumers. This study has implications in that it explains the mechanism by which anthropomorphism is formed by considering the human-likeness, which is the design attribute of social robots, and the construal level of consumers, which is the way of thinking of individuals. We expect to use the findings of this study as the basis for design optimization for the formation of anthropomorphism in social robots.