• 환경영향평가
• /
• 제21권2호
• /
• pp.247-254
• /
• 2012

This paper seeks for the set-up plan in the reasonable target area of environmental assessment. Domestically, the target area of environmental assessment is set up by the adjustment of opinion collection about the assessment scope result of an environmental factor. In a foreign country, the boundary of the target area for a development project is established with the environmental, economical, and social viewpoint based on the standard for significantly environmental impact. Based on the analysis of the present condition at home and abroad, the first set-up plan for the reasonable target area of environmental assessment is the preparation of the detailed term definition related to the target area of environmental assessment. The second is the arrangement of the judgement standard for significantly environmental impact. The quantitative assesment item can apply the present standard or regulation, and the qualitative assessment item can establish the standard based on factual and objective data. The last is the preparation of the reference material or the guideline for deciding the initial target area by the judgement standard and determining the final target area by opinion collection in the stage of scoping.

• 한국재료학회지
• /
• 제24권7호
• /
• pp.344-350
• /
• 2014

Metal films (i.e., Ti, Al and SUH310S) were prepared in a magnetron sputtering apparatus, and their cross-sectional structures were investigated using scanning electron microscopy. The apparatus used consisted of a cylindrical metal target which was electrically grounded, and two anode rings attached to the top and to the bottom of the target. A wire was placed along the center-line of the cylindrical target to provide a substrate. When the electrical potential of the substrate was varied, the metal-film formation rate depended on both the discharge voltage and the electrical potential of the substrate. As we made the magnetic field stronger, the plasma which appeared near the target collected on the plasma wall surface and thereby decreased the bias current. The bias current on the conducting wire was different from that for cation collection. The bias current decreased because the collection of cations decreased when we increased the magnetic-coil current. When the substrate was electrically isolated, the films deposited showed a slightly coarse columnar structure with thin voids between adjacent columns. In contrast, in the case of the grounded substrate, the deposited film did not show any clear columns but instead, showed a densely-packed granular structure. No peeling region was observed between the film and substrate, indicating good adhesion.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 하계종합학술대회논문집
• /
• pp.635-638
• /
• 1998

This paper proposes a simple method to measure system's performance in target tracking problems. Essentially employing the Cramer-Rao lower bound (CRLB) on trakcing accuracy, an algorithm of predicting system's performance under various scenarios is developed. The input data is a collection of measurements over time fromsensors embedded in gaussian noise. The target of interest may not maneuver over the processing time interval while the own ship observing platform may maneuver in an arbitrary fashion. Th eproposed approach is demonstrated and discussed through simulation results.

• 한국통신학회논문지
• /
• 제36권2A호
• /
• pp.160-171
• /
• 2011

유비쿼터스 컴퓨팅을 위한 핵심기술 중의 하나는 WSN이다. WSN은 인간과 모든 사물의 인식 정보를 기본으로 주변의 환경정보까지 탐지하여 이를 실시간으로 네트워크에 연결하여 정보를 관리하는 것이다. 이러한 환경에서 기존의 연구는 RGF를 이용하여 목표영역 내 대부분의 센서 노드에게 전송경로를 설정할 수 있는 메커니즘을 제공한다. 그러나 목표영역과 상관없는 노드들까지 에너지 소비를 부담해야하는 문제가 발생한다. 따라서 본 논문에서는 WSN 환경에서 싱크로부터 설정된 특정 지역에서 데이터를 수집 할 수 있도록 고안된 프로토콜인 EEDCP를 제안한다. EEDCP는 WSN 지역에서 목표영역 내부에서만 데이터 수집을 위한 전송경로를 설정하는 프로토콜이다. 그리고 시뮬레이션을 통해 제안하는 기법이 기존 연구와 비교해 에너지 효율성 및 고립노드 발생 비율 측면에서 효율적임을 보였다.

• The Journal of the Acoustical Society of Korea
• /
• 제17권3E호
• /
• pp.22-26
• /
• 1998

This paper proposes a simple method to measure system's performance in target tracking problems. Essentially employing the Cramer-Rao Lower Bound (CRLB) on tracking accuracy, an algorithm of predicting system's performance under various scenarios is developed. The input data is a collection of measurements over tim from sensors embedded in Gaussian noise. The target of interest may not maneuver over the processing time interval while the own ship observing platform may maneuver in an arbitrary fashion. The proposed approach is demonstrated and discussed through simulation results.

• 한국군사과학기술학회지
• /
• 제27권2호
• /
• pp.177-188
• /
• 2024

The strategic UAV for theater level ISR(Intelligence, Surveillance and Reconnaissance) mission typically has numerous ground targets over area of responsibility(AOR) or area of operation(AO). It is necessary to automatically incorporate these multitude of ground targets into mission planning process in order to collect ISR images before actual flight mission. In addition, weather information such as wind direction and/or velocity may have significant impacts on the qualities of collected sensor images, especially in SAR(Synthetic Aperture Radar) images. Thus weather factors in the operation altitude should also be considered in the mission planning stage. In this study, we propose a novel mission planning scheme based on target scheduling and deviation correction method incorporating weather factors.

• 인터넷정보학회논문지
• /
• 제5권6호
• /
• pp.1-10
• /
• 2004

A web robot is a software that has abilities of tracking and collecting web documents on the Internet(l), The performance scalability of recent web robots reached the limit CIS the number of web documents on the internet has increased sharply as the rapid growth of the Internet continues, Accordingly, it is strongly demanded to study on the performance scalability in searching and collecting documents on the web. 'Design of web robot based on Multi-Agent to speed up documents collection ' rather than 'Sequentially executing Web Robot based on the existing Fork-Join method' and the results of analysis on its performance scalability is presented in the thesis, For collection speedup, a Multi-Agent based web robot performs the independent process for inactive URL ('Dead-links' URL), which is caused by overloaded web documents, temporary network or web-server disturbance, after dividing them into each agent. The agents consist of four component; Loader, Extractor, Active URL Scanner and inactive URL Scanner. The thesis models a Multi-Agent based web robot based on 'Amdahl's Law' to speed up documents collection, introduces a numerical formula for collection speedup, and verifies its performance improvement by comparing data from the formula with data from experiments based on the formula. Moreover, 'Dynamic URL Partition algorithm' is introduced and realized to minimize the workload of the web server by maximizing a interval of the web server which can be a collection target.

• 한국비블리아학회지
• /
• 제23권3호
• /
• pp.105-137
• /
• 2012

웹상에서 유통되는 정보자원의 역사적, 사회적, 문화적 가치는 전 세계적으로 인정받고 있으며, 인류 유산으로 후세에게 물려주기 위한 웹 아카이빙 사업이 수행되고 있다. 이 사업에서 가장 기본이 되는 것은 수많은 웹 자원 중 수집 및 보존의 가치가 있는 웹 자원을 선정하기 위한 선정지침이라 할 수 있다. 본 연구에서는 선행연구 및 국내외 웹 아카이빙 선정지침을 집중적으로 분석하여 OASIS를 위한 선정지침의 개선안을 제안하였다. 첫째, 웹 자료에 대한 정의, 용어정의, 수집기본원칙, 수집방법, 수집주기, 구체적인 아카이빙 대상자원 선정에 대해서 개선 내용을 제안하였다. 둘째, 수집대상자료에 대해서 대폭적으로 개선 내용을 제안하였으며, 웹 아카이빙 선정제외자료에 대한 제안도 하였다. 마지막으로, 수집방법과 온라인 자료 납본과의 관련성, 선정대상자료에 대한 목록데이터베이스 구축의 필요성, 협력형 아카이빙 정책의 필요성에 대해서 논의하였다.

• 대한임베디드공학회논문지
• /
• 제12권3호
• /
• pp.149-157
• /
• 2017

In this paper, we propose BCMR (Block Classification with Monitor and Restriction) to ensure the isolation and to reduce the interference of blocks between a garbage collection and a wear leveling. The proposed BCMR monitors an endurance variation of blocks during the garbage collection and detects hot blocks by making a restriction condition based on this information. The proposal induces a block classification by its update frequency for the garbage collection and the wear leveling, so we will get a prolonged lifetime of NAND flash memory systems. In a performance evaluation, BCMR prolonged the lifetime of NAND flash memory systems by 3.95%, on average and reduced a standard deviation per block by 7.4%, on average.

• 한국철도학회논문집
• /
• 제9권4호
• /
• pp.343-348
• /
• 2006

In this paper, as a conceptual design of the catenary-current collection run tester which is planning to be constructed by KRRI, the feasibility study is described. In this study, reviews to determine the propulsion linear motor rating based on the target distance-speed curve through various simulation of LSM propulsion system were conducted. Moreover, the reviews of simulation results and desirable linear motor specifications are discussed in this paper.