• International conference on construction engineering and project management
• /
• 2007.03a
• /
• pp.721-728
• /
• 2007

The prediction of quality characteristics during the design phase of a construction project was fragmented, because no particular method exists. One of the most important key responses is the total displacements (horizontal and vertical). A brainstorming session produces the quality parameters i.e. the control factors which here are identified as: the steel joint, the pile's length, the excavation depth and angle, the distance between the piles, the anchor stretch and length to name just some of the most engaging in the design. The purpose of this study is to optimise these parameters to minimize the total displacements following a methodology based on Taguchi method. For this reason, a 2-level, L₈ orthogonal array has been employed to organize the experimentation. Data is obtained from a real-life excavation project designed on the Plaxis v.8 CAE package. Taguchi analysis is performed in the statistical package Minitab.

• Journal of Korean Institute of Industrial Engineers
• /
• v.28 no.4
• /
• pp.407-414
• /
• 2002

The inherent reliability of a product is primarily determined in the design stage, and therefore, design engineers should be able to design reliability into the product in an efficient manner. Especially, the product should be designed such that its reliability is robust to various noise factors encountered in production and field environments. The Taguchi method can be effectively used for this purpose. However, there exist only a few attempts to integrate the Taguchi method with reliability design, and in addition, the existing works do not sufficiently consider the robustness and/or the distinction between noise and acceleration factors. This paper develops a unified approach to robust reliability design assuming that accelerated life tests are conducted at each combination of design and noise conditions. First, an experimental structure for assigning not only acceleration but also noise factors is presented. Second, the reliability at the use condition is estimated using the assumed accelerated life test model. Third, reliabilities are transformed into 'efforts' using an effort function which reflects the degree of difficulty involved in improving the reliability. Finally, an optimal setting of design parameters is determined based on the mean and standard deviation of the effort values. The above approach is illustrated with an example of a paper feeder design.

• Korean Journal of Acupuncture
• /
• v.25 no.3
• /
• pp.15-27
• /
• 2008

Objectives : The objective of the current study is to optimize an acupoint electrical property measurement system by using the procedures and strengths of the Taguchi method. Methods : Taguchi method was applied in the optimization of the acupoint electrical property measurement system, as in the following steps: (1) determine evaluation index; (2) execute the 1st gage R&R; (3) identify controllable and uncontrollable factors; (4) design Taguchi crossed array layout; (5) execute experiments according to trial conditions; (6) analyze testing results; (7) determine optimum run; (8) execute the 2nd gage R&R; (9) confirm optimum run. Results : The results showed that electrodes with larger diameter and efferent electric current, with music played, can produce the larger different electrical conductivity between the acupoints and the non-acupoints under various conditions. Taguchi process optimization improved repeatability and reproducibility of the acupoint electrical property measurement system. Conclusions : In the optimized condition, repeatability and reproducibility of the acupoint electrical property measurement system was acceptable.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.534-538
• /
• 2004

On this study, we improved diaphgram for micro speaker performance using Taguchi method in discrete design space. The design of diaphgram has an effect on performance of micro speaker such as, thickness of diaphgram, shape of diaphgram, etc. Therefore this study carried to decide shape of diaphgram and thickness of diaphgram for minimizing 2nd natural frequency of diaphgram using Taguchi method. we showed improved design factors that minimized 2nd natural frequency of diaphgram. Also, 2nd natural frequency of diaphgram for micro speaker is reduced up to 37 percent maintaining twist mode shape. From the results of ANOVA, 2nd natural frequency of diaphgram for micro speaker have an effect on position of the outer curved shape and thickness of diaphgram.

• Transactions of the Korean hydrogen and new energy society
• /
• v.32 no.6
• /
• pp.636-641
• /
• 2021

Using numerical analysis, various factors influencing the performance development of high-pressure pumps for Dimethyl Ether (DME) engines were identified and the impact of each factor was evaluated using Taguchi method. DME fuels are more compressive than diesel fuels and have the lower heat generation, so it is necessary to increase the size of the plunger and speed (RPM) of the pump as well. In addition, it is necessary to change the shape and design of control valve to control the discharge flow and pressure. In this study, various variables affecting the performance and flow rate increase of high-pressure pumps for DME engines are planned using Taguchi method, and the best design method is proposed using correlation of the most important variables. As a result, we were able to provide the design value needed for a six-liter engine and provide optimal conditions. The best combination factors to optimize the flow rate at RPM 2,000 and diameter plunger with 20 mm. The regression equation can also be used to optimize the flow rate; -8, 13+0, 2552 RPM +54, 17 diam. Plunger.

• Journal of the military operations research society of Korea
• /
• v.27 no.1
• /
• pp.101-113
• /
• 2001

Taguchi and VTA(variation Transmission Analysis) methods have been widely used recently as new methods for product design. In this study, Taguchi method using analysis of variance and VTA method using regression analysis are reviewed and compared with each other in terms of parameter design and tolerance design. In analysis of variance, variation of quality characteristics arises from noise factors, therefore the optimal levels of design factors are selected to minimize the effect of noise factors. n regression analysis, variation of quality characteristics arises from variation of each own design factors. As a method to reduce variation of these quality characteristics, sensitivity analysis was performed for each design factors. An example of calculating tolerance interval for the given defect rate in PPM is also introduced. Especially, the new method is suggested to increase the estimation accuracy of variation of quality characteristics through regression analysis.

• 한국정보통신설비학회:학술대회논문집
• /
• 2009.08a
• /
• pp.289-292
• /
• 2009

In this paper, an optimum design center frequency proposes portable RFID reader antenna that is 920MHz frequency using the Taguchi's Method. Proposed antenna is cut corner of opposite angle and it's structure that have slots in four sides microstrip patch of a perfect square shape. This slot structure can miniaturize microstrip patch antenna and confirmed through an experiment that size of antenna about 18% decreases than structure that slot does not exist. Because compact antenna that have structure of slot changes according to complex design variables, analysis and experimental design for minimization of experiment number of times are required for optimum antenna design. In this research, designed antenna that have optimum structure when introduce and designs table of orthogonal arrays of the Taguchi's Method been experimental design that can minimize analysis and experiment number of times, achieve responsiveness analysis of main elements and analyzes the effect and minimizes design repeat with analysis result. Presented experiment result about antenna special quality that permittivity is 4.4 and manufactures to board of Epoxy 3.2T.

• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.180.2-180.2
• /
• 2005

• Proceedings of the KIEE Conference
• /
• 2002.04a
• /
• pp.40-42
• /
• 2002

This paper presents the optimal design of BLDC motor keeping the average torque and cogging toruqe of the initial model while minimizing the volume of magnet pole by FEM and Taguchi method. Experimental tests are performed by Finite element method, and the second order polynomial equations are obtained from FEM results due to design parameter variation referred to orthogonal arrays by Taguchi. The presented optimization shows a big reduction of computation time and a largely reduced volume of magnet pole.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.20 no.3
• /
• pp.232-238
• /
• 2011

In the present study, Taguchi method is used to determine the rough region first, followed by RSM technique to determine the exact optimum value during milling on a machining center. A region reducing algorithm is applied to narrow down the region of the Taguchi method for RSM. The result from the Taguchi method is fed to train the artificial neural network (ANN), whose optimum value is used to drive the region reducing algorithm. The proposed algorithm is tested under different cutting condition and results show that the introduced algorithm works well during milling process. It is also shown that theoretically obtained optimal cutting condition is very close to experimentally obtained result.