• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1998년도 춘계학술대회논문집; 용평리조트 타워콘도, 21-22 May 1998
• /
• pp.548-553
• /
• 1998

The specific noise level of 18 rotary compressor mufflers were measured and these data were analyzed by the Taguchi robust design method and the neural network. The optimal design value obtained by the neural network generally showed good agreement with that by the Taguchi method. The effects of eight important design variables on the specific noise level were discussed.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.638-642
• /
• 2003

This paper presents a parameter design of an Electrorheological(ER) panel for noise reduction using Taguchi method. Taguchi method is a robust design method that determines control parameters in the presence of noise effect. Host structure thickness, spacer thickness, base oil viscosity and the weight ratio of ER particles are chosen for the control factors. A test setup in an SAE J1400 facility is used to analyze the sound transmission loss. The sensitivity of each factor with signal-to-noise(S/N) ratio and analysis of variance are investigated. The analysis results show that the weight ratio of ER particle and base oil viscosity of the ER fluid mostly affects the noise reduction in the presence of electric field. Based on the Taguchi method, an optimal configuration was designed and comparison is made with experimental result fer the verification.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.157-162
• /
• 2003

This Paper presents a robust design of an Electrorheological(ER) damper using Taguchi method. Taguchi method is a robust design method that determines control parameters in the presence of noise effect. Electrode length, electrode gap, base oil viscosity and the weight ratio of ER particles are chosen for the control parameters and the temperature is considered to be a noise factor. The sensitivity of each factor with signal-to-noise(S/N) ratio and analysis of variance are investigated. The analysis results show that the electrode length and base oil viscosity of the ER fluid mostly affect the damping force in the absence of electric field. On the other hand, when the voltage is applied to the ER damper, the electrode length and the weight ratio of ER fluid exhibit significant effect. Based on the Taguchi method, an optimal configuration was designed and the robustness of the designed ER damper was validated by comparing the analysis and experimental results.

• Nuclear Engineering and Technology
• /
• 제35권3호
• /
• pp.251-259
• /
• 2003

The Taguchi method was applied to investigate the effect of design factors on the performance of the shutdown cooling heat exchanger in the SMART-P. This method provided the simulation matrix for the KDESCENT program and an efficient tool for analyzing the simulation results. Levels of the design factors were selected by the effectiveness-NTU method. From 18 runs with the KDESCENT program, it was found that the performance of the system was greatly influenced by the inlet temperature at the shell side and the mass flow rate of the reactor coolant at the tube side. After applying the Taguchi method, we identified the important design factor that should be controlled and designed carefully. This method provides an efficient way to estimate the influence of each design factor on a system performance.

• 기술사
• /
• 제33권1호
• /
• pp.83-88
• /
• 2000

Taguchi developed and provided various independent methods for actual application in design of experiments. Taguchi method is described in philosophy, method and others related to quality management. This thesis is one of case studies for improving the bond strength of epoxy resin by Taguchi method which is applied as a optimum developing tool in six sigma management revolution in many companies.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2007년도 학술대회
• /
• pp.407-410
• /
• 2007

In the RRH (Radio Remote Head) of a WCDMA Node B System, an HPA (High Power Amplifier) is used in order to amplify the transmission RF signal. Upon designing an HPA, the design requirements demand that the intermodulation characteristics are optimized during design and that the stability of the characteristics is maintained in the field. In this DOE (Design of Experiments) research, a few vital factors that affect intermodulation characteristics were first selected; then, an optimal solution was produced for high reliability in a noisy environment in the field by employing the Taguchi Method, a statistical method used for a robust design. Furthermore, by employing HALT(High Accelerated Life Test) during the verification test, this experiment has verified that an HPA that was designed using the Taguchi Method proved to be a far more robust design than an HPA that was designed without using the method.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집C
• /
• pp.565-571
• /
• 2001

As a method of structural optimization, a practical algorithm based on the Taguchi method is developed. The Taguchi method is applied iteratively updating the level values of design variables. The design region is translated or reduced during optimization and by appropriate choice of reduction factor and initial level intervals, a near-optimum solution can be found very efficiently. To treat inequality constraints, a variable penalty method is utilized. A software system named 'DS/Taguchi' is developed by integrating the proposed algorithm and commercial finite element analysis codes on the parametric CAD platform. Two examples are taken to examine the performance of the proposed algorithm and the developed software system.

• 대한기계학회논문집A
• /
• 제26권4호
• /
• pp.660-666
• /
• 2002

It has many variables and factors to design the friction materials for automotive brake pads. The purpose of this study is to develop the proper method for design of low-cost and to know friction characteristics of each raw materials. For the purpose of examining the effect of each major raw materials, we used the Taguchi L9(3$^4$)orthogonal matrix and 1/5 scale dynamo machine for evaluation of the friction characteristics of composite brake pads. By adapting the Taguchi method, it is easy to investigate the influence of each component in complicated composites friction materials. After analyzing the testing results by the Taguchi method, the effect of factors and levels influenced friction behavior was studied.

• 산업공학
• /
• 제23권3호
• /
• pp.257-263
• /
• 2010

Taguchi defined a good quality as 'A correspondence of product characteristic's expected value to the objective value satisfying the minimum variance condition.' For his good quality, he suggested Taguchi Method which is called Robust design which is irrelevant to the effect of these noise factors. Taguchi Method which has many success examples and which is used by many manufacturing industry. But Optimal solution of Taguchi Method is one among the experiments which is not optimal area of experiment point. On the other hand, Response Surface Method (RSM) which has advantage to find optimal solution area experiments points by approximate polynomial regression. But Optimal of RSM is depended on initial point and RSM can not use many factors because of a great many experiment. In this paper, we combine the Taguchi Method and the Response Surface Method with each advantage which is called Taguchi-RSM. Taguchi-RSM has two step, first step to find first solution by Taguchi Method, second step to find optimal solution by RSM with initial point as first step solution. We give example using catapults.

• 한국자동차공학회논문집
• /
• 제12권2호
• /
• pp.131-138
• /
• 2004

In the proto design stage of a new car, the performances of an occupant protection system can be evaluated by CAE even though the real test should be carried out. The number of the real test is reduced by the exact predictions followed by the appropriate design recommendation. However, the existing researches using CAE in predicting the performances do not consider the uncertainties of parameters. That often leads to inconsistency between test and CAE. In this research, the robust design of a protection system such as airbag and load limiter is suggested considering the frontal crash. The parameter design scheme of the Taguchi method is introduced to obtain the robust design of arbitrary airbag and load limiter. It is performed based on the frontal crash test condition of US-NCAP with an arbitrary passenger car. The variances of the performances such as HIC, chest acceleration and probability of combined injury are calculated by the outer array and the Taylor series expansion. Through the analysis of the Taguchi method, the robust optimum is determined.