• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.7 no.2
• /
• pp.38-44
• /
• 2008

In the present paper, we theoretically analyze the flow of magnetic fluids in a circular pipe with a vertical magnetic field and investigate the magnetic response by the external magnetic field. Theoretical study through the governing equation derived by Siliomis is carried out with numerical analysis by the Gauss Elimination Method. Using polar and magnetic effect parameters, theoretical equations and distributions for the velocity, apparent viscosity as the magnetic response are shown. Especially, in the region of strong magnetic field the specific property is appeared by finding a critical magnetic effect parameter for a polar effect parameter.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.698-702
• /
• 1992

In this paper, Micro-Genetic algorithms(.mu.-GAs) is proposed on a minimum-time path planning for robot manipulator, which is a kind of optimization algorithm. The minimum-time path planning, which can allow the robot system to perform the demanded tasks with a minimum execution time, may be of consequence to improve the productivity. But most of the methods proposed till now suffers from a significant computation burden and can't often find the optimal values. One way to overcome such difficulties is to apply the Micro-Genetic Algorithms, which can allow to find the optimal values, to the minimum-time problem. This paper propose an approach for solving the minimum-time path planning by using Micro-Genetic Algorithms. The effectiveness of the proposed method is demonstrated using the 2 d.o.f plannar Robot manipulator.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.1511-1514
• /
• 2007

KORAIL is one of the biggest consumer in electric power market so it is necessary to investigate power consumption pattern and optimize power rates. This paper presents simulation program for electric power rates define program based on billing system database. Base on the substation annual power usage DB data, the characteristic of the substation power consumption are investigated and effective electrical billing system are compared each other. Through this program it is verified that we can save more then several hundred million won for a year. Also electric train air condition power consumption was measured to figure the method how to reduce peak energy consumption.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.9
• /
• pp.53-61
• /
• 2000

The manufacture of a marine propeller typically requires long lead time to generate 5-axis tool path. Hence it may take several weeks to manufacture a satisfactory propeller with a general purpose CAD/CAM system. In this research a dedicated 5-axis CAD/CAM system for machining marine propellers has been developed, The system employs various methods to enhance the productivity : interference-free tool path generation employing check vectors and optimum cutter size determinants. In addition an iterative NURBS modeling technique is used to improve the accuracy of the modeled surface and effective cutting conditions are determined and recommended empirically to increase the productivity. The proposed CAD/CAM system has been implemented with C++ and OpenGL graphic library on the Windows system. The system validation and sample results are also given and discussed.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.454-455
• /
• 2008

1970년대 이후 반도체 기술의 발달로 싸이리스트 밸브가 기존의 수은방전밸브를 대체 하면서 HVDC 기술이 급격히 향상되고 교류송전에 비해 직류송전이 갖는 여러 가지 이점 때문에 최근 HVDC 송전이 점점 증가하고 있는 추세에 있다. 본 논문에서는 2000년에 발표된 CIGRE 189.의 "800kV급까지의 HVDC 송전케이블의 전기적 평가 권고안"에 준하여, HVDC해저케이블의 전기적 평가를 위한 극성반전시험 및 임펄스 중첩회로를 해석을 통하여 모의하고 전기적 시험회로의 설계 및 구성한 후 평가한 결과에 대해서 설명한다.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1201-1202
• /
• 2008

This paper describes what causes the breakage of the toughened glass stem insulators. Several plausible hypotheses were proposed by surveying the field, hearing evidence, analyzing the broken specimens, etc. The hypotheses were classified into a couple of patterns and the hypotheses were selected and listed in order of the possibility. As a result, the most convincing cause of the breakage was the resonance of the vibrations incoming from the H-frame side and the feeder side. In addition, the collision of ballasts and the impurities in the toughened glass could be also the causes.

• Journal of Korean Neurosurgical Society
• /
• v.44 no.3
• /
• pp.166-169
• /
• 2008

Sacral insufficiency fractures are usually known to develop in elderly patients with osteoporosis without definite trauma history. It is difficult to diagnose the sacral insufficiency fracture at an early stage because lower lumbar diseases. concurrently or not, may also be presented with similar symptoms and signs. We report a rare case of sacral insufficiency fracture who was not diagnosed initially but, instead, showed progressively worsening of clinical symptoms and radiological findings after decompression surgery for upper level lumbar stenosis.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.4 no.3
• /
• pp.39-44
• /
• 2005

With the development of high speed and accuracy machining, the micro-chips are formed in the machining process and broken particles are circulated with the cutting fluid. The surface roughness and accuracy of part are deteriorated because the metal particles included in the cutting fluid are embedded on machined surface. In this study, the influences of particles for the machined surface according to filtering degrees are evaluated and the embedding mechanism is suggested.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2016.10a
• /
• pp.699-701
• /
• 2016

최근 산업에서는 기계구성 부품과 고정밀 가공에 대한 요구가 높아지고 있으며, 생산 현장에서는 기계를 효율적으로 운용하는 것의 필요성과 정밀도향상의 요구가 높아지고 있다. 하지만 이를 위해서는 가공된 제품을 정밀히 관찰, 분석 할 수 있어야 하며, 이를 위해서는 사람의 눈으로 볼 수 없는 미세한 차이를 구분 할 수 있어야 한다. 이를 위해서 본 논문에서는 백색광 간섭 측정계를 이용해 측정된 데이터를 시각화 하고, 더 나아가서 6가지의 거칠기 파라미터를 제공하여 관찰, 분석에 있어서 유용한 정보를 제공하고자 한다.

• Journal of KIISE:Computer Systems and Theory
• /
• v.28 no.3
• /
• pp.134-143
• /
• 2001

NUMA 구조 다중 프로세서 시스템에서는 상호 연결망으로서의 버스의 제약을 극복하기 위해 지점간 링크를 이용한 링 구조가 제안되었다. 링 구조 NUMA 시스템에서, 전송이 페이지 단위(2K 바이트 이상)로 이루어지는 디스크 입출력 요구는 지점간 링크에 대한 오랜 접근을 요구하여 지점간 링크의 트래픽을 증가시키는 원인으로 작용한다. 본 논문에서는 지점간 링크의 트래픽을 줄이기 위한 방안으로 입출력 전용 채널을 사용하는 세 가지 디스크 입출력 구조를 제시한다. 제시되는 디스크 입출력 구조를 사용하는 시스템은 디스크 입출력 요구로 인한 지점간 링크의 접근을 없앰으로써 기존 시스템에 비해 트랜잭션의 수행시간을 줄일 수 있다는 장점이 있다. 중앙집중형, 병렬형, 분산형의 세 가지 디스크 입출력 구조를 설계하기 위한 고려 사항과 구현 비용 등을 생각해 본 후, 노드수, 원격 디스크 접근 확률, 디스크 입출력 전송 데이터 크기 등을 달리한 여러 시스템 환경에서의 각 구조의 성능을 비교, 분석해 본다.