• Journal of the Korea Society of Computer and Information
• /
• v.24 no.12
• /
• pp.43-50
• /
• 2019

In this paper, we designed a dynamic TDMA scheme for smooth tactical data distribution in TDMA tactical datalinks. Since the existing tactical datalinks use fixed time radio resources, it is impossible to change the resource status according to network conditions during operation. To overcome these limitations, we designed, implemented, and simulated the DTDMA processing and related messages such as initial timeslot allocation, intermediate time slot allocation, time slot return, and timeslot retrieval. As a result, it was shown that the method of effectively allocating and using timeslot resources according to the situation is applicable. Therefore, we will continue research to manage DTDMA communication on tactical data link in the future.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37C no.10
• /
• pp.993-1003
• /
• 2012

This paper presents a method for joint analysis of combat power and communication system performance via interoperation of a war game simulator and a communication network simulator using HLA/RTI. Effectiveness analysis of combat power has been performed by war game simulation with consideration of communication effects simulated by the network simulator. Performance analysis of a communication system has been performed by network simulation with computer forces generated by the war game simulator. Survivability of the red force and transmission power of a tactical FM radio for the blue force have been measured for the joint analysis.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.12
• /
• pp.1250-1260
• /
• 2014

In this paper, a novel resource scheduling, which is used for hub network based long distance airborne tactical communication, is proposed. Recently, some countries of the world has concentrated on developing data rate and networking performance of CDL, striving to keep pace with modern warfare, which is changed into NCW. And our government has also developed the next generation high capacity CDL. In hub network, a typical communication structure of CDL, hybrid FDMA/TDMA can be considered to exchange high rate data among multiple UAVs simultaneously, within limited bandwidth. However, due to different RTT and traffic size of UAV, idle time resource and unnecessary packet transmission delay can occur. And these losses can reduce entire efficiency of hub network in long distance communication. Therefore, in this paper, we propose RTT and data traffic size based UAV scheduling, which selects time/frequency resource of UAVs by using iterative sorting algorithm. The simulation results verified that the proposed scheme improves data rate and packet delay performance in low complexity.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.1
• /
• pp.202-210
• /
• 2018

The modern battlefield is being developed as a network-centric warfare where priority is given to rapid status grasp and power deployment through scientification and modernization. Therefore, tactical data link has been continuously improving the network speed, and recently, security technology is required for wireless communication with the UAV and various devices for reconnaissance. In addition, the future information warfare will utilize advanced IT technology positively. Efforts are needed to integrate various systems and networks. However, these efforts are meaningful only when they can assume sufficient security in a newly changing information and communication environment. In this paper, we propose a new cryptographic synchronization for link encryption suitable for tactical data links. The proposed cryptographic synchronization is useful for T4 UAV link encryption, and it is also adaptable for lower BER, then we analyze the performances analysis of that.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.24 no.6
• /
• pp.645-654
• /
• 2021

In this paper, we proposed a protocol to convert 2W telephone analog signals to Ethernet data in a private PSTN 2W tactical voice system. There are several kinds of operational problems in the tactical telephone network where 2W telephone copper lines are installed hundreds of meters away from the PBX in a headquarter site. The reason is that it is difficult to install and maintain the 2W telephone copper cable in severe operational fields and to meet safety and stability operational requirements of the telephone line under lighting and electromagnetic environments. In order to solve these challenging demands, we proposed an efficient method that the 2W analog interface signals between a private PBX system and a 2W telephone is converted to Ethernet messages using the optical Ethernet data communication network already deployed in the tactical weapon system. Thus, it is not necessary to install an additional optic cable for the ethernet telephone line and to maintain the private PSTN 2W telephone network. Also it provides safe and secure telecommunication operation under lightning and electromagnetic environments. This paper presents the conversion protocol from 2W telephone signals over Ethernet interface between PBX systems and 2W telephones, the mutual exchange protocol of ethernet messages between two converters, and the rule to process analog signal interface. Finally, we demonstrate that the proposed technique can provide a feasible solution in the tactical weapon system by analyzing its performance and experimental results such as the bandwidth of 2W telephone ethernet network and the transmission latency of voice signal, and the stability of optic ethernet voice network along with the ethernet data network.

• Journal of Convergence for Information Technology
• /
• v.11 no.4
• /
• pp.26-34
• /
• 2021

In the era of the Fourth Industrial Revolution, the future battlefield will carry out multi-area operations with hyper-connected, high-speed and mobile systems. In order to prepare for changes in the future, the Korean military intends to develop various weapons systems and form a multi-layer tactical network to support On The Move communication. However, current tactical networks are limited in support of On The Move communications. In other words, the operation of multi-beam antennas is necessary to efficiently construct a multi-layer tactical network in future warfare. Therefore, in this paper, we look at the need for multi-beam antennas through the operational scenario of a multi-layer tactical network. In addition, based on development consideration factors, features of rotary-wing and fixed-wing aircraft, we present the location and operation of airborne relay drone installations of multi-beam antennas.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.10
• /
• pp.1990-1998
• /
• 2017

The success of naval operation prioritizes the implementation of a robust communication network that delivers accurate and prompt communications to one another. The satellite, which is the main communication network of the military, is required to construct a preliminary communication network because of the enemy radio disturbance and weak point of fixed antenna. The military operational communication network has been in transition from voice-centered wireless communication network to text message-based communication network. In this paper we suggest an enhanced communication method built on Roll Call, the main communication method of ROK Navy operating tactical data link called Link-11. Simulation results display that the proposed method reduces the transmission time per unit frame by 4.3 times compared to the Roll Call and 6.3 times compared with the Round Robin & Broadcasting; it is also proved that the higher the direct reception rate, the shorter the transmission time required by 1.6 times maximum.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.5
• /
• pp.50-58
• /
• 2013

In this paper, we present the implementation result of an UWB terminal for mobile tactical networks. Considering the major characteristics of the terminals of tactical networks, i) targeting voice service, ii) pedestrian users, and iii) demanding high network fidelity, we designed all protocol layers from physical layer to applications layer. The designed terminal is implemented in forms of software and hardware with RF ASIC, FPGA, DSP, and GPP. The functionality of the implemented terminal is validated by successfully performing 1 to 1 and multi-hop voice communication test.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.6
• /
• pp.1097-1106
• /
• 2011

Tactical Information Communication Network(TICN), a concept-type integrated Military Communication system that enables precise command control and decision making, is designed to advance into high speed, large capacity, long distance wireless relay transmission. To support mobility in battlefield environments, the application of Ad-hoc networking technology to its wireless communication has been examined. Ad-hoc network works properly only if the participating nodes cooperate in routing and packet forwarding. However, if selfish nodes not forwarding packets of other nodes and malicious nodes making the false accusation are in the network, it is faced to many threats. Therefore, detection and management of these misbehaving nodes is necessary to make confident in Ad-hoc networks. To solve this problem, we propose an efficient intrusion detection technique to detect and manage those two types of attacks. The simulation-based performance analysis shows that our approach is highly effective and can reliably detect a multitude of misbehaving node.

• Information and Communications Magazine
• /
• v.24 no.10
• /
• pp.24-33
• /
• 2007

최근 들어 차세대 전술통신 체계인 전술 종합 정보 통신 (TICN: tactical information communication network) 구축 사업이 진행되고 있다. 전술통신 환경에서 고속의 데이터 통신을 위해서는 상용 통신 시스템과는 달리 고려해야 할 점이 많다. 본고에서는, 전술통신에서 반드시 고려해야 할 위협 요소인 재밍 (jamming)에 대해서 이제까지 알려진 몇 가지 재밍 신호 모형과 재밍 신호를 효과적으로 탐지해 내고 제거할 수 있는 항재밍 (anti-jamming) 기법들에 대해 알아본다.