• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.391-393
• /
• 2017

Unmanned aerial vehicles(UAVs) operating in the military for various purposes are designed to transmit information collected according to the purpose to GCS(Ground Control System), and to transmit/receive the vehicle's operational control and status information using wireless communication(or datalink). Currently, the military UAV systems in operation in Korea use unique communication methods, protocols, and message structures for each system. In this paper, we analyze the TM/TC data protocol of two types of military UAV systems currently under development and propose a more efficient TM/TC message design scheme in wireless communication(or datalink) environment. And we will discuss issues to be considered for standardization of technology for ensuring interoperability with many UAVs or newly introduced UAV systems.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.18 no.4
• /
• pp.432-440
• /
• 2015

UGVs(Unmanned Ground Vehicles) are robots that can substitute humans in reconnaissance operations of potentially dangerous and contaminated sites. Currently, there have been active research on utilizing UGVs in military environments. Much resrach has been focused on exploiting the weakness of topology-based routing and instead utilize location-based routing for the networking of UGVs. It is generally assumed that location-based routing methods can fully utilize the location information gained from GPS. However, this may not be possible in tactical environments due to enemy GPS jamming and LOS(Line of Sight) limitations. To solve this problem, we propose a location-based routing scheme utilizing low control message that can calibrate the location information using GPS information as well as location of neighboring UGV, movement direct and speed information. Also utilizing topology-based routing scheme to solve incorrect location information in GPS jamming region.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.10
• /
• pp.401-409
• /
• 2018

This paper presents means of reducing noise in NSD using path control methods for Light Tactical Vehicles (LTV). NSD is applied to the rear axle of LTVs for enhancing mobility. NSD can improve mobility of vehicles with a high locking ratio but causes noise under certain conditions due to its mechanical structure. This noise results from contact between gears due to the differential role of NSD. The noise affects users, so users have continually requested noise reductions. Though the noise doesn't affect product performance and durability, and satisfies the National Defense's noise condition standards, users request for noise reduction is the focus of this research. Eliminating the source of sound for LTVs is realistically limited, so this research applies a path control method to reduce noise by controlling the path which transmits the noise. This study improves the structural delivery system and examines methods of reducing noise in LTV systems.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.12
• /
• pp.1250-1260
• /
• 2014

In this paper, a novel resource scheduling, which is used for hub network based long distance airborne tactical communication, is proposed. Recently, some countries of the world has concentrated on developing data rate and networking performance of CDL, striving to keep pace with modern warfare, which is changed into NCW. And our government has also developed the next generation high capacity CDL. In hub network, a typical communication structure of CDL, hybrid FDMA/TDMA can be considered to exchange high rate data among multiple UAVs simultaneously, within limited bandwidth. However, due to different RTT and traffic size of UAV, idle time resource and unnecessary packet transmission delay can occur. And these losses can reduce entire efficiency of hub network in long distance communication. Therefore, in this paper, we propose RTT and data traffic size based UAV scheduling, which selects time/frequency resource of UAVs by using iterative sorting algorithm. The simulation results verified that the proposed scheme improves data rate and packet delay performance in low complexity.

• Journal of the Society of Naval Architects of Korea
• /
• v.47 no.4
• /
• pp.628-645
• /
• 2010

To perform the engagement level simulation between the underwater vehicle model and the surface model those are constituted with various systems/ sub-systems, we implemented four different federates as a federation according to the IEEE 1516 HLA (High Level Architecture) protocol that is the international standard in the distributed simulation. Those are CFCS (Command and Fire Control System) federate, motion federate, external entities (torpedos, countermeasure and surfaceship) federate, and visualization federate that interacts with OSG (Open Scene Graph)-based visualization rendering module. In this paper, we present the detailed method about the model constitution for discrete event simulation in the distributed environment. For the sake of this purpose, we introduce the DEVS (Discrete Event System Specification)-HLA-based modeling method of the CFCS federate that reflects not only the interations between models, but also commands from user and tactics manager that is separated from the model. The CFCS federate makes decisions in various missions such as the normal diving, the barrier misision, the target motion analysis, the torpedo launch, and the torpedo evasion. In the perspective of DEVS modeling, the CFCS federate is the coupled model that has the tactical data process model, command model and fire control model as an atomic model. The message passing and time synchronization with other three federates are settled by the $m\ddot{a}k$ RTI (Runtime Infrastructure) that supports IEEE 1516. In this paper, we provides the detailed modeling method of the complicated model that has hierarchical relationship such as the CFCS system in the submarine and that satisfies both of DEVS modeling method for the discrete event simulation and HLA modeling method for the distributed simulation.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.2
• /
• pp.181-190
• /
• 2014

The optimized flight path planning which is appropriate for UAV operation with high performance and multiplex sensors is required for efficient ISR missions. Furthermore, a mission visualization tool is necessary for the assessment of MoE(Measures of Effectiveness) prior to mission operation and the urgent tactical decision in peace time and wartime. A mission visualization and analysis tool was developed by combining STK and MATLAB, whose tool was used for UAV ISR mission analyses in this study. In this mission analysis tool, obstacle avoidance and FoM(Figure of Merit) analysis algorithms were applied to enable the optimized mission planning.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.3
• /
• pp.506-512
• /
• 2018

Unmanned aerial vehicles(UAVs) operating in the military for various purposes are designed to transmit information collected according to the purpose to GCS(Ground Control System), and to transmit/receive the vehicle's operational control and status information using wireless communication(or datalink). Currently, the military UAV systems in operation in Korea use unique communication methods, protocols, and message structures for each system. Among these, the Division UAV is designed to transmit fixed size TM/TC data repeatedly and the Corps UAV is designed to transmit aperiodic TM/TC data to the variable length of the message-based. In this paper, we analyze the TM/TC data protocol of existing military UAV systems and present data protocol design method which is considered to be more efficient in wireless communication environment applied to equipment under development. And we will discuss issues to be considered for standardization of technology for ensuring interoperability with many UAVs or newly introduced UAV systems.

• The Journal of Korea Robotics Society
• /
• v.18 no.4
• /
• pp.444-455
• /
• 2023

In this report, a specialization plan for wearable robots by mission profile was investigated and analyzed to derive an application plan. The final goal of this study was to derive the operating requirements of wearable robots according to specialized plans, and to conduct a specialized study on wearable robots by mission profile through investigation/analysis of specialized plans for each mission profile. In the study, 1) Research on technology trends related to military wearable robots such as patents and papers, 2) Research/analysis of mission profiles to characterize wearable robots, 3) Analysis of wearable robot specialization plans according to mission profiles, and 4) Requirements for wearable robot operation were derived. In the first time of the study, a survey on technology trends related to wearable robots for soldiers such as patents and papers was completed, and a military consultative body was conducted to derive measures to characterize wearable robots. In addition, a survey was conducted on mission profiles, and the second time study derived Key Performance Parameters (KPP) for operational performance, core performance, and system performance based on scenarios by mission profile. However, it is revealed that the KPP derived from the research results was not covered in this paper because it was judged that more in-depth research was needed prior to disclosure. In order to prepare for future battlefield situations and increase the usability of wearable robots, this study was conducted to characterize wearable robots by considering the characteristics of soldiers' equipment according to mission profiles and to characterize wearable robots by mission profile.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.48 no.6
• /
• pp.88-96
• /
• 2011

Underwater acoustic communication is applicable in various areas, such as ocean data collection, undersea exploration and development, tactical surveillance, etc. Thus, robot control system construction used for underwater-robot like AUV or ROV is essential in these areas. In this paper, we propose the Message Merging MAC($M^2$-MAC) protocol, which is suitable for real time robot control system, considering energy efficiency in important parts of underwater acoustic sensor network constitution. In this proposed MAC protocol, gateway node receives the data from robot nodes according to the time slots that were allotted previously. And messages delivered from base-station are generated to one MAC frame by buffering process. Finally, generated MAC frames are broadcasted to all robot nodes in the cluster. Our suggested MAC protocol can also be hybrid MAC protocol, which is successful blend of contention based and contention-free based protocol through relevant procedure with Maintenance&Sleep (M&S) period, when new nodes join and leave as an orphan. We propose mathematical analysis model concerned about End-to-End delay and energy consumption, which is important factor in constructing real-time robot control system. We also verify the excellence of performance according to comparison of existing MAC protocols with our scheme.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.6
• /
• pp.94-103
• /
• 2018

The purpose of designing composite lattice structure which applied to launching vehicle and tactical missile body is to minimize the thickness and weight for applied load. It is usually made of carbon fiber; fabricating with filament winding process over silicon mold, and provided with a window opening for inspection purpose if necessary. In this paper compression test is conducted without window opening in lattice structure and preliminary FEA is carried out to confirm its accuracy. And then FEA is performed for the case of window opening to evaluate the soundness and the safety factor of the structure. We have calculated for two kinds of window shape; rectangular one and hexagonal one. And we have calculated safety factors of the lattice structure with window opening in every case based on failure strength of rib and knot with varying the thickness and location of the window for hexagonal shape. Through our investigation, we have found out the followings; (1) the hexagonal shaped window is shown higher safety factor than rectangular one, (2) a window in a certain location is shown higher safety factor than others, (3) although the soundness of window structure is improved as increasing its thickness, a window of a certain thickness is shown higher safety factor than others because of stress concentration.