• 제목/요약/키워드: Table-top

검색결과 203건 처리시간 0.029초

후판 압연공정에서의 판 선단부 형상제어 연구 (Ski-end shape control based on the model in heavy plate mill)

  • 천명식;박해두
    • 한국소성가공학회:학술대회논문집
    • /
    • 한국소성가공학회 2007년도 추계학술대회 논문집
    • /
    • pp.93-95
    • /
    • 2007
  • Studies on ski-end shape control at the top end of rolling plate in heavy thick plate mill by using FEM analysis and measuring system have been performed. Plate shape behaviour at the top-end on rolling by the two different methods in finishing rolling process has been observed. One is to minimize the height of ski-end by using pass line based on the relational model between shape factor and pick-up and the other one is to prevent turn down problem caused by the impact between table roller and down bended plate on rolling by using roll speed difference. To minimize the height of ski-end, the prediction models based on the FEM analysis and measuring data was developed. The control method of ski - end shape on finishing rolling process was applied in actual mill and the height of ski-end was reduced by about 50% compared with conventional operation.

  • PDF

쌍계사 오층석탐 실물 크기 모델의 지진시험 (Seismic Test of a Full Scale Model of Five-Story Stone Pagoda of Sang-Gye-Sa)

  • 김재관
    • 한국지진공학회:학술대회논문집
    • /
    • 한국지진공학회 1999년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Fall
    • /
    • pp.388-395
    • /
    • 1999
  • There occurred a moderate size earthquake of M=5 at Whagae-Myun Hadong-Gun Kyongsangnam-Do of Korea, It caused severe damage to the buildings and other structures is Sang-Gye-Sa a famous and beautiful Buddhist Temple, The 5-story stone pagoda was standing in front of Keumdang. The top component tipped over and fell to the ground during the earthquake. In order to have accurate and quantitative estimate of the intensity of earthquake a full-scale replica is made through rigorous verification process, The completed model was mounted on the shaking table and subjected to th seismic tests. It was observed that the top component overturned at 0.16 G of EPGA when the NS component of the 1940 el Centro earthquake records was used as the input motion. A brief history of this project is presented and important test results are report6ed and their implication is discussed.

  • PDF

Research Productivity in Business and Economics: South Korea, 1990-2016

  • Jin, Jang C.
    • East Asian Economic Review
    • /
    • 제23권1호
    • /
    • pp.89-107
    • /
    • 2019
  • This paper ranks higher education in Korea based upon research productivity in business and economics disciplines. The number of SCI-level journal articles are tabulated using the Web of Science search engine, over the sample period from 1990 to 2016. The league table shows that many private universities dominate top-tier ranks, which is consistent with the school reputations most commonly cited by the general public in Korea. In contrast, many national universities appear in the second-tier, and their scanty performance in business and economics is in sharp contrast with our earlier findings in which national universities performed well in science and engineering fields (Jin and Kim, 2018). In addition, the ranking order in lower-ranked schools is found to be sensitive to a small change in publications, whereas the publication gap among top-tier schools is relatively large. Finally, unlike our general perception, the size of school does not matter for collaborative research. Some policy implications are discussed as a conclusion.

MULTIPLICATIVE PLANE PARTITIONS

  • Kim, Jun-Kyo
    • Journal of the Korean Society for Industrial and Applied Mathematics
    • /
    • 제8권2호
    • /
    • pp.1-5
    • /
    • 2004
  • A multiplicative plane partition is a two-dimensional array of positive integers larger than 1 that are nonincreasing both from left to right and top to bottom and whose multiple is a given number n. For a natural number n, let $f_2(n)$ be the number of multiplicative plane partitions of n. In this paper, we prove $f_2(n)\;{\leq}\;n^2$ and a table of them up to $10^5$ is provided.

  • PDF

디지털 홀로그래픽 테이블탑형 디스플레이 기술

  • 김재한;박민식;남제호;문경애;김진웅
    • 정보와 통신
    • /
    • 제31권2호
    • /
    • pp.3-12
    • /
    • 2014
  • 본고에서는 기가코리아(Giga KOREA) 연구사업에서 개발할 디지털 홀로그래픽 테이블탑형(Table-top) 디스플레이의 기술과 개발 현황을 소개한다. 먼저 3차원 입체 디스플레이의 국내외 기술동향을 살펴보고 디지털 홀로그래픽 테이블탑형 디스플레이의 주요 요구사항과 핵심요소 기술 및 기술개발 추진계획을 기술한다.

테이블 탑 디스플레이 환경에서 손 형상 인식 (Hand pose recognition on Table Top Display)

  • 김형관;이양원;이칠우
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2008년도 하계종합학술대회
    • /
    • pp.719-720
    • /
    • 2008
  • 마우스나 키보드를 벗어나 직관적인 손을 이용하는 테이블 탑 디스플레이는 대부분 Touch 정보를 이용한다. 직접적인 터치에 손 형상 및 제스처를 이용할 수 있다면 보다 자유롭게 시스템을 컨트롤 할 수 있을 것이다. 본 논문에서는 테이블 탑 디스플레이에서의 손형상 인식을 기술한다.

  • PDF

Categorical Data Analysis by Means of Echelon Analysis with Spatial Scan Statistics

  • Moon, Sung-Ho
    • Journal of the Korean Data and Information Science Society
    • /
    • 제15권1호
    • /
    • pp.83-94
    • /
    • 2004
  • In this study we analyze categorical data by means of spatial statistics and echelon analysis. To do this, we first determine the hierarchical structure of a given contingency table by using echelon dendrogram then, we detect candidates of hotspots given as the top echelon in the dendrogram. Next, we evaluate spatial scan statistics for the zones of significantly high or low rates based on the likelihood ratio. Finally, we detect hotspots of any size and shape based on spatial scan statistics.

  • PDF

탁구 포핸드 드라이브와 스매시의 각운동학 분석 (Angular Kinematic Analysis of Forehand Drive and Smash in Table Tennis)

  • 손원일
    • 한국운동역학회지
    • /
    • 제18권1호
    • /
    • pp.11-19
    • /
    • 2008
  • 전국 규모의 경기에서 우승한 선수들을 포함한 남자대학 선수 8명을 대상으로 했다. 피험자의 4명은 펜홀더 그립, 4명은 세이크핸드 그립의 라켓을 사용하며 모두 오른손을 사용했다. 탁구의 포핸드 드라이브와 스매시의 라켓스윙동작과 관련된 각도성분, 스윙궤도, 스윙자세 등의 3차원 각운동 특성을 비교 분석한 결과 다음과 같은 결론을 얻었다. 라켓각(p<.05)과 라켓의 스윙각(p<.01)에서 두 동작 간 유의한 차이를 보였다. 스매시는 백스윙 자세에서 이미 라켓을 세워 라켓각을 크게 유지했으며, 라켓의 스윙각을 작게 해서 볼 스피드에 비중을 두는 것을 알 수 있었다. 또한 백스윙 자세에서 라켓헤드의 높이도 두 동작 간 큰 차이가 나타났다. 임팩트 순간 phg에서 두 동작 간 라켓 장축의 열림각의 차이가 크게 나타난 것을 보면, 볼에 순회전의 스핀을 넣기 위해서 약간 뒤에서 임팩트가 이루어진 것을 알 수 있었다. 백스윙 자세에서 상체의 기울기는 드라이브 동작에서 phg보다 shg에서 상체를 조금 더 구부리는 것은 중립 자세에서 라켓 그립의 구조적 차이로 인한 것으로 판단된다.

Critical seismic incidence angle of transmission tower based on shaking table tests

  • Tian, Li;Dong, Xu;Pan, Haiyang;Gao, Guodong;Xin, Aiqiang
    • Structural Engineering and Mechanics
    • /
    • 제76권2호
    • /
    • pp.251-267
    • /
    • 2020
  • Transmission tower-line systems have come to represent one of the most important infrastructures in today's society. Recent strong earthquakes revealed that transmission tower-line systems are vulnerable to earthquake excitations, and that ground motions may arrive at such structures from any direction during an earthquake event. Considering these premises, this paper presents experimental and numerical studies on the dynamic responses of a 1000 kV ultrahigh-voltage (UHV) transmission tower-line system under different seismic incidence angles. Specifically, a 1:25 reduced-scale experimental prototype model is designed and manufactured, and a series of shaking table tests are carried out. The influence of the seismic incidence angle on the dynamic structural response is discussed based on the experimental data. Additionally, the incidence angles corresponding to the maximum peak displacement of the top of the tower relative to the ground (referred to herein as the critical seismic incidence angles) are summarized. The experimental results demonstrate that seismic incidence angle has a significant influence on the dynamic responses of transmission tower-line systems. Subsequently, an approximation method is employed to orient the critical seismic incidence angle, and a corresponding finite element (FE) analysis is carried out. The angles obtained from the approximation method are compared with those acquired from the numerical simulation and shaking table tests, and good agreement is observed. The results demonstrate that the approximation method can properly predict the critical seismic incidence angles of transmission tower-line systems. This research enriches the available experimental data and provides a simple and convenient method to assess the seismic performance of UHV transmission systems.

고려시대 가구재료 연구 (A Study on the Material of Furniture in Goryeo)

  • 조숙경
    • 한국가구학회지
    • /
    • 제25권1호
    • /
    • pp.19-27
    • /
    • 2014
  • This paper studied the materials of the furniture which the noble men used in Goryeo, based on the furniture material category of solid wood furniture, lacquerware inlaid with mother-of-pearl and hardware. As for the solid wood furniture, the wood and furniture types are inferred based on the documents. The trees used for the wood furniture were zelkova, korean willow, pine, royal paulownia, maidenhair tree, korean pine, chinese juniper and elm. The furniture types were table, chair, wooden bench, small portable table, writing table, and folding screen. As to the types of lacquerware inlaid with mother-of-pearl, most of them were hams with top, which were made of abalone shells. The features of the lacquerware inlaid with mother-of-pearl were in detail and elaborate like the pattern of the full bloomed chrysanthemum. Writing tables were also made of lacquerware as pieces of furniture. Distinctively, the mother-of-pearl furniture material was popular enough to be used even in a horse saddle. Regarding the metal feldspar used as both a practical use and decoration, there are drop handle, hinge, the front basis, and lock seen in the artifacts, which were made of cast iron, bronze, and brass. Their manufacture techniques were eojamoon, bratticing and sheet metal. Through this study of the furniture materials used in Goryeo, it seems that Goryeo furniture focused on the functions rather than on the decorations, and in turn the forms were simple and basic. The technique of mother-of-pearl, a bit elaborate one, was used in the props furniture like kitchen wares, hams, or writing talbes. Probably, the solid wood is inferred to be used in a low wooden bench, a chair, and a table based on the documents.

  • PDF