• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2005.04a
• /
• pp.352-358
• /
• 2005

This study aims to separate hydrograph into baseflow and event water to calculate baseflow rate during a rainfall in small catchments, Yuseong, Daejeon, The hydrograph of stream during a period with no excess rainfall will decay. The discharge is composed entirely of groundwater contributions. During the period, the Cl concentration of the stream water can be regarded as being in equilibrium with that of the groundwater. Using Cl as a conservative tracer, two-component hydrograph separations were performed from end point of the period to next end point. The required data were obtained by monitoring of the surface water table, along with discharge rate of stream. Cl concentration of rainfall, surface water were measured and recorded. Hydrograph separation, a mixing model using chemical tracer is applied to chemical hydrograph separation technique. These results show that baseflow rates are 31.6% of rainfall in the catchments during study period.

• Economic and Environmental Geology
• /
• v.15 no.3
• /
• pp.113-122
• /
• 1982

The surveyed Boseong river, flows from south to north crossing Boseong gun Mirukg myon, Nodong myon, Yuleo myon, Bocgnae myon, Mundeog myon, and Seungju gun Nam myon, Jeonranam do. The geology of the surveyed area consists of age-unknown composite gneiss and schist, crystaline chlorite gneiss, porphyroblastic gneiss and granite gneiss, and metasediments of Myon Bong formation and Seologri formation. These metamorphic rocks are intruded by cretaceous biotite granite, granodiorite, and quartz diorite. The heavy sands occur in Quarternary alluvium and colluvium. The composition of the river bed is sand 60%, gravel 30%, and clay 10%. The gravel content of the river bed decreases as the increases. The average depth of auger boring is 0.87 m. The average heavy mineral composition of the heavy sand is monazite 6.83%, zircon 4.88%, ilmenite 11.36%, magnetite 8.36% and garnet 4.84%. The best heavy minerals separation procedure would be primary treatment of the sand by humphrey spiral and table, and retreatment of the table concentrate by magnetic separator. The minimum economically feasible capacity of gravity and magnetic separation plant would be 500 ton/hr when only the heavy minerals are recovered but it may be reduced to 100 ton/hr. capacity, if gravels and sands are added to the valuable products.

• Journal of the Mineralogical Society of Korea
• /
• v.21 no.4
• /
• pp.383-395
• /
• 2008

To enhance the grade and recovery rate of the gold/silver ores which yield at Philippine Mankayan mine, we studied the characteristics which are the geologic and mineralogical features of gold and silver ore, the liberation by crushing and grinding, the separation by sieving and shaking table. Gold/silver ore is composed of the sulfide minerals like pyrite, sphalerite, galena; and the gangue minerals which is quartz, clay. Gold/silver element are mainly contained in a sulfide minerals like pyrite, sphalerite and galena. To increase the liberation rate of sulfide minerals containing gold/silver element, the gold/silver ore has to be grounded under $100{\mu}m$ very finely because the crystal size of sulfide minerals is distributed from $1{\mu}m$ to $100{\mu}m$. The liberation rate of gold/silver ore increases to 92% when the particle size ($d_{90}$) of ore is grounded below $100{\mu}m$ by jaw crusher $\to$ cone crusher $\to$ rod mill by steps. The grade and recovery of sulfide minerals could not be enhanced by sieving separation because those crystal size is distributed homogeneously below $100{\mu}m$. But, when we separated the sieved ore using shaking table, the gold and silver grade increased to 40 ppm and 140 ppm, respectively. Then the recovery rate of gold reach almost 100% but that of silver is no more that 50%.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.10
• /
• pp.859-867
• /
• 2007

The objective of this study is to develop and validate a numerical method which can handle the multi-rotor aerodynamic characteristics. For the purpose of power estimation, table look-up method is implemented to the existing unsteady panel code that is coupled with a time-marching free wake model. Also, the Reynolds number scaling is implemented for the application to various regions of Reynolds number. The computed results are validated against the available experimental data for coaxial and tandem rotors. In the validation case for the coaxial rotor, more accurate result is acquired when the thickness effect is considered. The wake instability problem occurs at a particular separation distance between the rotors for tandem rotors. The wake instability is avoided by setting the single-rotor wake geometry as the initial wake geometry for the multi-rotor analysis. The estimated result for rotor separation effect is compared with the result of the momentum theory.

• Journal of the Mineralogical Society of Korea
• /
• v.24 no.1
• /
• pp.1-17
• /
• 2011

Mineralogical study was carried out for heavy minerals in the sea sand near Ongjingun bay, Kyonggi-do separated using the gravity and magnetic separators. Ilmenite, zircon and minor monazite and garnet were valuable minerals with gangue minerals of quartz, K-feldspar, plagioclase, muscovite, hornblende, epidote and chlorite. Quantitative analysis with SIROQUANT program showed that the contents of ilmenite separated with the gravity separation (the shaking table separation), the 1st step magnetic separation (rare earth magnetic separation) and the 2nd step magnetic separation (the Eddy current magnetic separation) were increased into 0.8, 18.3, and 48.7%, respectively. The content of ilmenite, monazite and zircon were recalculated based on the chemical composition of the representative and heavy fraction products of raw sand, the 1 step and 2 step gravity separations, and the 1 step and 2 step magnetic separations. The content increased to 0.23, 0.55, 5.22, 16.17, and 44.99% in ilmenite, 0.11, 0.02, 0.16, 0.51, and 1.19% in monazite. Although the zircon content did not differ over the processes (0.13, 0.12, 0.11, 0.15, and 0.10%), the improved recovery of zircon is expected by applying sieving process because of its high content (27%) in the fine grain size fraction (< 140#) of the 2 step gravity separation.

• Water for future
• /
• v.18 no.1
• /
• pp.85-94
• /
• 1985

A method is developed for the separation of the major base flow in a river hydrograph combining the numerical techniques and the empirical methods. The linearized Boussinesq equation and the storage function are used to obtain the base flow recession. The shape of base flow curve made by the recharge of the groundwater table aquifer resulting from rainfall in determined by the Singh and Stall's graphical method, and the continuous from for the curve is approximated by the multiple and polynomial regression. this procedure was successfully tested for the separation of base flow and the establishment of hydrograph in a natural watershed. It was found that the direct numerical method applied to the homogeneous linear second order ordinary differential equation system is not suited to obtain the recession curve, and the case that the loss is generated in the partially penetrating stream can not be solved by the method of this study.

• 한국전산유체공학회:학술대회논문집
• /
• 2011.05a
• /
• pp.318-320
• /
• 2011

Numerical study was conducted to simulate the heat transfer on the real launch vehicle base. Three different base temperatures were chosen, to simulate the heat accumulation on the base. Moreover, six different pressure ratio conditions were used to express the different air conditions. As a result, the table that can used to estimate the base heat fox along the base temperature and pressure condition was made.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.9 no.2
• /
• pp.75-87
• /
• 2007

Groundwater recharge rates were estimated and compared in a headwater catchment at the Gwangneung Supersite using three different methods: water-table fluctuation (WTF), mass balance, and hydrograph separation techniques. Data were obtained during the rainy season from June to September 2005. Two different WTF methods estimated the groundwater recharge rate as 25.9% and 23.6%. The mass balance calculation of chloride ions indicated recharge rates of 13.4% on average. Baseflow separation using chloride ion as a tracer from six storm hydrographs produced a 14.0% net baseflow rate on average. Because of the implicit assumption of a long-term steady state without storage change, recharge rates calculated by mass balance and hydrograph separation were smaller than those done with WTF methods, which include the amount of increased storage due to the water-level rise. Subsequently, the WTF method is superior to others in the estimation of groundwater recharge rate to comprehend the dynamic characteristics of the hydrologic cycle.

• The Journal of Engineering Geology
• /
• v.19 no.2
• /
• pp.217-225
• /
• 2009

A series of model borehole experiments and analyses for density compensation were performed to achieve the effective density correction of gamma-gamma log obtained from PVC cased boreholes. A follow-up survey was made for clarifying the variation property of detector responses depending on casing types, the presence of borehole fluid, and the degree of separation between probe and borehole wall. A special emphasis was placed on the comparison of gamma responses obtained from above and below ground water tables. Finally, we could quantify the detector responses as a function of separation between the probe and borehole wall, construct standoff compensation charts, and the limitations of the compensation have been discussed for the environments of both above and below ground water tables.

• Journal of the Korea Safety Management & Science
• /
• v.17 no.4
• /
• pp.381-396
• /
• 2015

The study proposes multiple TRIZ contradiction solution strategies for addressing PC (Physical Contradiction) and TC (Technical Contradiction) by implementing TRIZ cause-and-effect tree. The problem associated with TC of the ends is solved by PC of means which employs a causal relationship between causes and effects. The TRIZ contradiction solution strategies demonstrated in this research are classified into 3 types of combined strategy as follows: 1. To-Be PC and AS-Is PC, 2.To-Be PC and As-Is TC, 3.As-Is PC and To-Be TC. The combined strategy of To-Be PC and As-Is PC is similar to a divide-and-conquer technique. This strategy adopts parallel strategies using 4 separation principles in time, in space, between parts and the whole, and upon condition of two reversed-PCs. Moreover, its application elucidates the conflict relationship of two TCs from the study. The integrated 4 separation principles and 40 inventive principles present an effective synergy effect from the combination, and further addresses the problems in the TRIZ contradiction resolution strategies. Combined strategy of To-Be PC and As-Is TC implements the 40 inventive principles that To-Be PC of the means resolves the As-Is TC of the ends. Combined strategy of As-Is PC and To-Be TC also uses inventive principles to the As-Is PC of the means to solve the To-Be TC of the ends. In addition, propositional and logical relationship of necessary and sufficient conditions between TC and PC is used to support the validity of 3 TRIZ contradiction solution strategies. In addition, 3 other strategies of necessary and sufficient conditions validate the contraposition relationship of the truth table. This study discusses TRIZ case studies from National Quality Circle Contest from the years between 2011 and 2014 to provide the usage guidelines of TRIZ contradiction solutions for quality purposes. Examining analysis from the case studies and investigating combined strategies allows the users to obtain comprehensive understanding.