• Journal of Korean Society of Rural Planning
• /
• v.20 no.2
• /
• pp.45-56
• /
• 2014

There are direct and indirect approaches to measure the quality of rural life with comparison of urban. One of the direct approach is to survey living satisfaction of rural residents. Survey result is also important factor for the understanding of local needs in rural development. Rural Development Adminstration(RDA) has developed a survey table with 71 survey items for measuring the satisfaction of rural residents. In rural field forum which have conducted for finding the direction of rural development, the understanding of local needs with measuring the satisfaction of rural residents is important. But developed survey table is difficult to be applied in rural field forum not only many survey items but also overlapping in survey range. The purpose of this study is to suggest a field-applicable survey table in rural field forum based on results of RDA. Survey items were selected based on the importance score of RDA survey table, and weighting values were applied to each survey items. Finally, we suggested 31 items based on results with principle component and reliability analysis.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2000.10a
• /
• pp.209-214
• /
• 2000

Shaking table tests were performed to investigate dynamic behavior of a three dimensional flexible rectangular liquid storage tank. Response characteristics to the three components of translational motion and three component of rotational motion were studied. The aluminium tank was exposed to the shaking high enough to make it behave in nonlinear range. Only very limited amount of the data have been processed yet. Very interesting phenomena on the effects of non-symmetry have been observed and presented. Test results that show nonlinear behavior under the high intensity shaking are reported.

• Earthquakes and Structures
• /
• v.17 no.6
• /
• pp.635-647
• /
• 2019

Tests and theoretical studies for seismic responses of a transmission tower-line system under coupled horizontal and tilt (CHT) ground motion were conducted. The method of obtaining the tilt component from seismic motion was based on comparisons from the Fourier spectrum of uncorrected seismic waves. The collected data were then applied in testing and theoretical analysis. Taking an actual transmission tower-line system as the prototype, shaking table tests of the scale model of a single transmission tower and towers-line systems under horizontal, tilt, and CHT ground motions were carried out. Dynamic equations under CHT ground motion were also derived. The additional P-∆ effect caused by tilt motion was considered as an equivalent horizontal lateral force, and it was added into the equations as the excitation. Test results were compared with the theoretical analysis and indicated some useful conclusions. First, the shaking table test results are consistent with the theoretical analysis from improved dynamic equations and proved its correctness. Second, the tilt component of ground motion has great influence on the seismic response of the transmission tower-line system, and the additional P-∆effect caused by the foundation tilt, not only increases the seismic response of the transmission tower-line system, but also leads to a remarkable asymmetric displacement effect. Third, for the tower-line system, transmission lines under ground motion weaken the horizontal displacement and acceleration responses of transmission towers. This weakening effect of transmission lines to the main structure, however, will be decreased with consideration of tilt component.

• The Journal of Korean Institute for Practical Engineering Education
• /
• v.3 no.2
• /
• pp.93-99
• /
• 2011

We introduce the application what using the MultiTouch-Table of the PC-mechanic Certification. Thesedays, People does't use the Mouse and Keyboard and use people gesture. We introduce Graphic and Image by addition. Theseday, MultiTouch-Table is so famous. We use it the multitouch-table to on 3D Maxs and C#. We help them to get the certification using the component Scale and Drags through the camera view and then include the PC-Mechanic question of domestic.

• The Korean Journal of Food And Nutrition
• /
• v.30 no.5
• /
• pp.1068-1079
• /
• 2017

This study was applied to the PCA (Primary Components Analysis) for the sixteen table setting at the 2017 Yeongju local food contest. In this contest, we have developed a seonbibansang and a temple one-dish meal. As a result of the correlation analysis, the applicability and composition were 0.7980, harmony and taste were 0.7747 and easiness and composition were 0.7435. In the Primary Component $Y_1$, all the variables $X_1{\cdots}X_{10}$ mean that the quality of the food had positive values greater than zero. The second Primary Component $Y_2$ has a large positive value while $X_4$, $X_5$, $X_6$, $X_7$, $X_9$ have negative values. $Y_2$ is a value representing the sanitation variable, and can be considered a traditional and characteristic table setting natural to the native food in Yeongju. In addition, we developed an-hyangbansang and seonmyoaecheong food content by applying PCA factors (the elements of harmony, ease and sanitation). Table setting of an-hyangbansang provided energy 61.5%, protein 20.0% and fat 18.5% and seonmyoaecheong provided energy 62.7%, protein 15.4% and fat 22.2%. This satisfied the necessary amount of caloric nutrient intake that could be provided in a meal. Especially through story-telling, a modern interpretation - or rebranding - of local and traditional foods could make these traditional food products familiar to consumers currently. The developed table setting is felt to be conductive to the possible commercialization and introduction of traditional food into the mainstream commercial food service industry.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1998.10a
• /
• pp.541-546
• /
• 1998

The objective of this research is to observe the actual response of low-rise nonseismic moment-resisting infilled reinforced concrete frame subjected to varied levels of earthquake ground motions. First of all, the reduction scale for the model was determined as 1 : 5 considering the capacity of the shaking table to be used. This model was, then, subjected to the shaking table motions simulating Taft N21E component earthquake ground motions, whose peak ground accelerations(PGA`s) were modified to 0.12g, 0.2g, 0.3g, and 0.4g. The global behavior and failure mode were observed. The lateral accelerations and displacements at each story and local deformations at the critical portions of structure were measured. Before and after each earthquake simulation test, free vibration tests were performed to find the changes in the natural period of the model.

• Journal of KSNVE
• /
• v.11 no.2
• /
• pp.234-240
• /
• 2001

Recently, the regulations from the government and the concerns of people be raised to the interest in exhaust and intake noise of passenger car as much as other vehicles. In these demands, performance prediction software was developed in this paper. In this study, Robust design was used for improving the noise reduction capacity of intake system with the performance prediction software. On the basis of the existing design, length and radius of each component that was thought to be effective to the performance of intake system was selected. At first, factors are arranged by using Ll8 table of orthogonal array and then optimum value can be obtained by modified Ll6 table of orthogonal array.

• Journal of Korean Society for Quality Management
• /
• v.30 no.1
• /
• pp.133-143
• /
• 2002

We propose an optimal design to improve the muffler's capacity by reducing the noise of the intake system by adapting kriging method with the robust design. For the first stage of a design, the length and radius of each component of the current muffler system are selected as control factors. Then, the $L_18$ table of orthogonal arrays is adapted to extract the effective main factors. As the second stage, the $L_18$ table of orthogonal arrays using kriging method is adapted to take the significant factors into consideration. As an optimal design, the $L_18$ table of orthogonal arrays with main effects is proposed and the kriging method is adapted for more efficient design. The kriging method improves the performance of intake system.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2001.09a
• /
• pp.331-338
• /
• 2001

Seismic performances of the base isolated model of Five Story Stone Pagoda were studied through shaking table tests. Friction pendulum system (FPS), Pure-friction system with laminated rubber bearing (LRB) and Ball with rubber bearing were selected fur the comparison of performances. Performances of specially designed isolation systems were tested dynamically using shaking table. The test results of isolated model are compared with those of fixed base model. Compared with fixed base model, the isolated model showed that it could withstand much higer intensity of earthquake motion. The Effective Peak Ground Acceleration (EPGA) value of isolated model when the top component tipped over was above twice of that value in case of fixed base model. According to the additional test results, the lower value of coefficient of friction than that of common frictional base isolation systems is more effective to protect the piled multi-block system of Pagoda against moderate intesity of ground motion.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2015.04a
• /
• pp.143-146
• /
• 2015

Software Defined Network (SDN) separates control plane and data plane to achieve benefits such as centralized management, centralized provisioning, lower device cost and more flexibility. In SDN, scalability is an important issue. Centralized controller can be a bottle neck and many research tried to solve this issue on the control plan. However, scalability issue does not only happen in the control plane, but also happen in the data plane. In the data plane, flow table is an important component and its size is limited. In a large network operated by SDN technology, the performance of the network can be highly degraded because of the size limitation of a flow table. In this paper, we propose a ranking-based flow replacement method, Flow Table Management (FTM), to overcome this problem.