• Earthquakes and Structures
• /
• v.19 no.1
• /
• pp.59-77
• /
• 2020

The code static eccentricity model for elastic torsional design of structures has two critical shortcomings: (1) the negation of the inertial torsional moment at the center of mass (CM), particularly for torsionally-unbalanced (TU) building structures, and (2) the confusion caused by the discrepancy in the definition of the design eccentricity in codes and the resistance eccentricity commonly used by engineers such as in FEMA454. To overcome these shortcomings, using the resistance eccentricity model that can accommodate the inertial torsional moment at the CM, interactive relations between shear and torsion are proposed as follows: (1) elastic responses of structures at instants of peak edge-frame drifts are given as functions of resistance eccentricity, and (2) elastic hysteretic relationships between shear and torsion in forces and deformations are bounded by ellipsoids constructed using two adjacent dominant modes. Comparison of demands estimated using these two interactive relations with those from shake-table tests of two TU building structures (a 1:5-scale five-story reinforced concrete (RC) building model and a 1:12-scale 17-story RC building model) under the service level earthquake (SLE) show that these relations match experimental results of models reasonably well. Concepts proposed in this study enable engineers to not only visualize the overall picture of torsional behavior including the relationship between shear and torsion with the range of forces and deformations, but also pinpoint easily the information about critical responses of structures such as the maximum edge-frame drifts and the corresponding shear force and torsion moment with the eccentricity.

• Advances in concrete construction
• /
• v.9 no.1
• /
• pp.93-102
• /
• 2020

In this study, we examined the relationship among the rheological properties, workability, and extrudability in the construction of concrete structures using additive manufacturing. We altered the component materials (binder type, water-binder (W/B) ratio, sand ratio) to assess their effect on the rheological properties experimentally. The results indicated that the W/B and sand ratios had the largest effect on the rheological properties. In particular, when the sand ratio increased, it indicated that adjusting the sand ratio would facilitate control over the rheological properties. Additionally, we compared the rheological properties with the results of a traditional workability evaluation, namely the table flow test. This indicated the possibility of inferring the rheological properties by using traditional methods. Finally, we evaluated extrusion quantity according to table flow. The extrusion rate was 350 g/s for a flow of 210 mm and 170 g/s for a flow of 130 mm, indicating that extrusion rate increased as flow increased; however, we concluded that a flow standard of approximately 140-160 mm is suitable for controlling the actual extrusion quantity and rate.

• Human Ecology Research
• /
• v.55 no.5
• /
• pp.465-480
• /
• 2017

This study examined the relationship between family meal time and emotional well-being for 5,186 fathers who were employed and had at least one child aged under 18 for the years 2009 and 2014 by analyzing their time diaries. In doing so, changes in time spent by fathers on family meals between 2009 and 2014 were also examined along with the factors associated with the amount of meal time for each year in order to understand ways to increase paternal participation in family meals. Analytic results showed that a father's family meal time had a positive association with his time use and life satisfaction; however, fathers who spent more than 40 minutes a day having meals with the family reported the highest score in time use and life satisfaction. The amount of time fathers spent on family meals increased from 38 minutes in 2009 to 43 minutes in 2014, whose change turned out to be mainly attributable to something more than the compositional change in the population between the two years, such as growing public awareness or cultural acceptance of the value of family meal. Fathers in dual-earner households tend to have longer family meal times; however, different factors were associated with their family meal times in 2009 and 2014. Policy implications are discussed in light of the government-initiated dining table education campaign to increase family meal time for the sake of children's character education at home.

• Journal of Internet Computing and Services
• /
• v.4 no.6
• /
• pp.33-42
• /
• 2003

A XML Instance repository model based on the Edge-Labeled Graph is suggested for storing the XML instance in Relational Databases, This repository model represents the XML instance as a data graph based on the Edge-Labeled Graph, extracts the defined value based on the structure of data path, element, attribute, and table index table presented as database schema, and stores these values using the Mapper module, In order to support querry, XML repository model offers the module translating XQL which is a query language under XPATH to SQL, and has DBtoXML generator module restoring the stored XML instance. As a result, it is possible to represent the storage relationship between the XML instances and the proposed repository model in terms of Graph-based Path, and it shows the possibility of easy search of specific element and attribute information.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.2
• /
• pp.445-453
• /
• 2005

The design process of a relational database system consists of requirement analysis, conceptual design using ER diagram, logical design, and physical design. In logical design process, the conceptual schema is transformed to relational schema, and relational schema is normalized. This traditional design process is hard to applied in real database design process, since there is an ambiguity in conceptual design process. In this paper, we suggest a new design process, which provides more structural design steps by removing the conceptual design process. In new approach, we produce the data flow diagram by the structural methodology. From the attributes in the data store of data flow diagram, we construct relational table schema, and we normalize relational schema. Finally we produced table relationship diagram in order to figure out relationships between tables.

• Journal of Environmental Science International
• /
• v.23 no.4
• /
• pp.605-613
• /
• 2014

In this work, the delay time for groundwater recharge was estimated by comparing simulated recharges by means of SWAT(Soil and Water Assessment Tool) model and WTF(Water Table Fluctuation) method. The delay time for groundwater recharge means that the time when the water from rainfall travelled through vadose zone just after getting out of soil zone bottom. As measuring this delay time is almost impossible, we used to compare the estimated values from modeling(SWAT) and analytic method(WTF). The test site is Hancheon watershed which has 8 groundwater measurement stations. The results show that the altitude has a linear relationship with the estimated delay time values. To validate these results, we conducted corelation analysis between transformed groundwater levels and observed ones. The results showed that computed groundwater levels have good corelation($R^2$=0.97, 0.87, respectively). The estimated delay time would be used for the groundwater behaviour characteristics in vadose zone. As recharge rates vary according to the height, the delay time is thought to be an import variable for the proper groundwater recharge estimation.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.5
• /
• pp.1798-1813
• /
• 2021

This paper proposes a positive experience design approach for Internet of Things (IoT) intelligent products to improve users' subjective well-being in the fields of artificial intelligence and big data. First, the authors selected six target users and taking the Xiaomi IoT intelligent products for the research objects and conducted a thorough observation on how the target users used IoT intelligent products in their own homes over two weeks via a home-visiting interview, group diary, and focus group. Second, they constructed an individual activities table for the participants' IoT intelligent product experience using a hierarchical task analysis (HTA). Third, two researchers sorted out the sub-tasks of happiness in the HTA table. Finally, the authors found the positive experience design approach of IoT intelligent products. The positive experience design approach of IoT intelligent products is proposed from focusing on the personal pleasure experience to individual life meaningful design and group social relationship design, including individual pleasure experience, personal goal realization, group needs satisfaction and the harmony of group relations. The paper uses the two design examples of an interactive kettle and a harmonious chair to further discuss the feasibility of the design approach. In the era of big data, it is helpful for designers to use this design approach to improve the users' sense of sustainable pleasure, achievement perception of their future goal realization, and the well-being of the group's social relationships.

• Journal of Wellbeing Management and Applied Psychology
• /
• v.2 no.2
• /
• pp.19-37
• /
• 2019

Over the last few decades, the atmospheric carbon dioxide emission has been amplified to a great extent in Turkey. This amplification may cause global warming, climate change and environmental degradation in Turkey. Consequently, ecological condition and human life may suffer in the near future from these indicated threats. Therefore, an attempt was made to test the relationship among a number of expected factors and carbon dioxide emissions in the case of Turkey. The study covers the time series data over the period of 1970-2017. We employed the modern econometric techniques such as Johansen co-integration, ARDL bound testing approach and the block exogeneity. The results of the Johansen co-integration test show that there is a significant long-run relationship between carbon dioxide emissions and expected factors. The long-run elasticities of the ARDL model show that a 1% increase in the GDP per capita, electric consumption, fiscal development and trade openness will increase carbon dioxide emissions by 0.14, 0.52, 0.09 and 0.20% respectively. Further, our findings reveal that the environmental Kuznets curve (EKC) hypothesis and inverted U-shaped relationship between carbon dioxide emission and economic growth prevails. Therefore, the EKC hypothesis is valid and prevailing in the Turkish economy. The diagnostic test results show that the parameters of the ARDL model are credible, sTable and reliable in the current form. Finally, Block exogeneity analysis displays that all the expected factors are contributing significantly to carbon dioxide emissions in the Turkish economy.

• Journal of Nutrition and Health
• /
• v.27 no.8
• /
• pp.794-804
• /
• 1994

This study was conducted to investigate the relationship between lactational capacity and intakes of energy and energy-yielding nutrients. Food consumption, intakes of carbohydrate, protein, fat and energy and quantity and proximate composition of milk of 11 lactating Korean mothers were determined at 1, 2 and 3 months postpartum longitudinally. Food consumption was estimated using a 24-hour recall method ; intakes of energy and energy-yielding nutrients were calculated according to the Food Composition Table. Daily milk production was estimated using a 72-hour test-weighing method ; protein, fat, lactose and energy concentrations were analyzed. Average intakes of energy and protein were 1974$\pm$386㎉/day and 67.0$\pm$12.3㎉/day, these were 73% and 74% of the Korean Recommended Allowances, respectively. Average milk yield was 720.1$\pm$123.3ml/day containing energy 59.6$\pm$9.5㎉/dl, protein 1.1$\pm$0.1g/dl, fat 2.7$\pm$0.8g/dl, and lactose 6.3$\pm$0.3g/dl. No relationship existed between the intakes of carbohydrate, protein, fat and energy and the quantity and proximate composition of the milk. However, the intakes of energy, carbohydrate and vegetable protein were inversely related to the concentrations of energy and lactose in the milk. This result indicates that lactational capacity may be affected by the other factors excluding intakes of energy and energy-yielding nutrients and a high intake of energy may not guarantee optimal lactational capacity.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.23 no.1
• /
• pp.86-102
• /
• 1981

The soil test data of 28 earth dams, scheduled to be constructed in Kore3, were selected for this study. The safety factors of their side slops were computed using Fellenius' "slice Method" by computer. The results summarized in this study are as follows; 1. Dam sections can be easily determined by fig.10 without a time consuming trial and error calculations of assumed sections. 2. For the economical design of earth dam sections, it was found that more cohesive soil was suitable for lower dams(dam height less than 25m) and soils with a higher friction angle was better for higher dams 3. In the case that used soil materials have the same Internal friction angle, side slope increase was almost same. 4. The relationship between side slope and friction angle was found as log.S=a tan ø+b (Fig. 7) 5. The relationship between side slope and cohesion (c) was also found as log. S=a c+b (Fig. 8) 6. The change of safety factors due to the change of central core materials was very little (Table-2) 7. The decrease of safety factors according to the unit weight increase of embankment materials was negligible. 8. In general the relationship between the wet unit weight and the saturated unit weight was r sat = (rt)$^2$+0. 140. This study will contribute to the determination of economic and safe planning and designing of earth dams, embankments and cutting side slopes.