• Journal of the Korean Ceramic Society
• /
• v.35 no.9
• /
• pp.958-968
• /
• 1998

Porous silica ceramics were prepared using DCCA(Drying Control Chemical Additives) Such as uncharged polymer(Polyethylene glycol) and protein (Lipase) under H2O/Low-grade TEOS=10 C2H5OH/Low-grade TEOS=1 HC1/Low=grade TEOS=0.01 After Plain which doesn't added DCCA and samples of 11 sorts which varied molecular weight of PEG(Mw=600, 1000, 2000) quantity of Lipase and concentration of wat-er were synthesized gellation time and thermal analysis were investigated. After heat-treated at 600, cry-stal structures analyses of SiO2 polymer and characteristics of pores were investigated. Gellation time was retarded about 2-6 times as compared with plain resulting in addition of DCCA and crystal structures ex-hibited amorphous state. Moreover as increase of water a short gellation time was obtained. The samples added PEG showed increase of specific surface areas up to 20-40% and had micropores while those of Lipase were decreased about 90% and showed broad pore size distribution.

• Proceedings of the Korean Ceranic Society Conference
• /
• 2003.04a
• /
• pp.162.1-162
• /
• 2003

• Journal of the Korean Ceramic Society
• /
• v.38 no.1
• /
• pp.39-44
• /
• 2001

솔-젤법으로 S $r_{0.9}$B $i_{2.1}$T $a_2$$O_{9}$ stock solution을 합성하고, Ir $O_2$/ $SiO_2$/Si 및 기판 위에 스핀코팅법으로 약 2000$\AA$ 정도의 두께를 가지고 SBT 박막을 제조하였다. Pt/Ti $O_{x}$ 전극을 사용한 SBT 박막과 비교하였을 때 Ir $O_2$전극을 사용한 SBT 박막의 경우 더 낮은 급속 열처리 온도 즉, 72$0^{\circ}C$에서 형석상에서 층상 페롭스카이트 상으로의 상전이가 관찰되었다. 그리고, Ir $O_2$전극을 사용한 SBT 박막은 낮은 열처리에서 결정성장이 이루어졌다. Ir $O_2$전극을 사용한 SBT 박막은 $650^{\circ}C$에서 열처리하였을 때 포화된 이력곡선을 얻었지만, Pt/Ti $O_{x}$ 전극을 사용한 SBT 박막은 $700^{\circ}C$에서 열처리하였을 때 이력곡선이 관찰되었다. Ir $O_2$전극을 사용한 SBT 박막은 $700^{\circ}C$의 열처리에서 8.79 $\mu$C/$ extrm{cm}^2$ (3V)의 2Pr 값을 나타내었다.나타내었다.다.

• Journal of the Korean Ceramic Society
• /
• v.32 no.8
• /
• pp.915-921
• /
• 1995

The morphotropic phase boundary and phase transitions of the solid solutiion system, (1-x)(Na1/2Bi1/2)TiO3-PbTiO3＋xPbTiO3 were studied by investigating changes in crystal structure, variations in permittivity with temperature, and calorimetric behavior. It was observed that the morphotropic phase boundary (MPB) of this solid solutiion system was at near 14 mol% of PbTiO3. Compositions containing less than 10mol% PbTiO3 (x<0.1) exhibited a phase transition, i.e. ferroelectric rhombohedrallongrightarrowparaelectric paraelectric cubic, with increasing temperature. Composition containing more than 14 mol% PbTiO3 (x 0.14) showed a phase transition from ferroelectric tetragonal to paraelectric cubic. In the composition range of 0.1$\varepsilon$ (T) curve, which coincided with a phase transition from ferroelectric rhombohedral to an intermediate phase, was also found.

• Korean Journal of Materials Research
• /
• v.18 no.9
• /
• pp.475-481
• /
• 2008

Positive temperature coefficient of resistivity (PTCR) characteristics of (1-x)$BaTiO_3-x(Bi_{0.5}K_{0.5})TiO_3$ ceramics doped with $Nb_2O_5$ were investigated in order to develop the Pb-free PTC thermistor available at high temperatures of > $120^{\circ}C$. The PTCR characteristics appearing in the ($B_{i0.5}K_{i0.5})TiO_3$ (< 5 mol%) incorporated $BaTiO_3$ ceramics, which might be mainly due to $Bi^{+3}$ ions substituting for $Ba^{+2}$ sites. The 0.99$BaTiO_3-0.01(Bi_{0.5}K_{0.5})TiO_3$ ceramics showed good PTCR characteristics of a low resistivity at room temperature (${\rho}_r$) of $31{\Omega}{\cdot}cm$ a high ${\rho}_{max}/{\rho}_{min}$ ratio of $5.38{\times}10^3$, and a high resistivity temperature factor (${\alpha}$) of $17.8%/^{\circ}C$. The addition of $Nb_2O_5$ to 0.99$BaTiO_3-0.01(Bi_{0.5}K_{0.5})TiO_3$ ceramics further improved the PTCR characteristics. Especially, 0.025 mol% $Nb_2O_5$ doped 0.99$BaTiO_3-0.01(Bi_{0.5}K_{0.5})TiO_3$ ceramics exhibited a significantly increased ${\rho}_{max}/{\rho}_{min}$ ratio of $8.7{\times}10^3$ and a high ${\alpha}$ of $18.6%/^{\circ}C$, along with a high $T_c$ of $148^{\circ}C$ despite a slightly increased ${\rho}_r$ of $31{\Omega}{\cdot}cm$.

• Proceedings of the Korean Ceranic Society Conference
• /
• 2003.10a
• /
• pp.230.2-230
• /
• 2003

• Journal of the Korean Ceramic Society
• /
• v.54 no.5
• /
• pp.395-399
• /
• 2017

The thermal properties and crystallization behavior of calcium phosphate glass fabricated using eggshell were examined. Nature eggshell has several impurities in the main component of $CaCO_3$. To manufacture calcium phosphate glass, washed eggshell was dissolved in aqua-regia while adding a solution of isopropyl alcohol, D. I. water and phosphoric acid. The calcined precursor was melted at $1000^{\circ}C$, and the glass ($T_g$ : $540^{\circ}C$) was crystallized at $620{\sim}640^{\circ}C$, which temperature range is relatively low compared to the crystallization temperature of other general types of calcium phosphate glass. The calcium phosphate glass using eggshell was successfully crystallized without any additional nucleating agents due to the multiple effects of impurities such as $Fe_2O_3$, $Al_2O_3$, SrO and $SiO_2$ in the eggshell. The main crystalline phase was ${\beta}-Ca(PO_3)_2$ and a biocompatible material, hydroxyapatite, was also observed. The crystallization process was completed under the condition of a holding time of only 1 h at the low temperature.

• Journal of the Korean Ceramic Society
• /
• v.40 no.1
• /
• pp.46-51
• /
• 2003

Ferroelectric $Sr_{0.7}Bi_{2.1}Ta_{2.0}O_9$ thin films with 200 nm thicknesses were deposited on $Pt/Ti/SiO_2/Si$ substrate by liquid delivery MOCVD process. In these experiments, $Sr(TMHD)_2{\cdot}pmdeta,\; Bi(ph)_3$ and $Ta(O^i/Pr)_4(TMHD)$ were used as precursors, which were dissolved in n-butyl acetate and pentamethyldiethylenetriamine. Substrate temperature and reactor pressure of this experiment was $570^{\circ}C$and 5 Torr, respectively. The remanent polarization value (2Pr) of SBT thin film with annealed at $780^{\circ}C$was$7.247{\mu}C/cm^2$and$8.485 {\mu}C/cm^2$by applying 3 V and 5 V, respectively.

• Journal of the Korean Ceramic Society
• /
• v.54 no.2
• /
• pp.150-157
• /
• 2017

Three types of piezoelectric single crystals [PMN-PT (Generation I $[Pb(Mg_{1/3}Nb_{2/3})O_3-PbTiO_3]$), PMN-PZT (Generation II $[Pb(Mg_{1/3}Nb_{2/3})O_3-Pb(Zr,Ti)O_3]$), PMN-PZT-Mn (Generation III)] were grown by the solid-state single crystal growth (SSCG) method, and their dielectric and piezoelectric properties were measured and compared. Compared to (001) PMN-PT and PMN-PZT single crystals, the (001) PMN-PZT-Mn single crystals exhibited a higher transition temperature between the rhombohedral and tetragonal phases ($T_{RT}=144^{\circ}C$), as well as a higher coercive electric field ($E_C=6.3kV/cm$) and internal bias field ($E_I=1.6kV/cm$). The (011) PMN-PZT-Mn single crystals showed the highest coercive electric field ($E_C=7.0kV/cm$), and the highest stability of $E_C$ and $E_I$ during 60 cycles of polarization measurement. These results demonstrate that both Mn doping (for higher electromechanical quality factor ($Q_m$)) and a (011) crystallographic orientation (for higher coercive electric field and stability) are necessary for high power transducer applications of these piezoelectric single crystals. Specifically, the (011) PMN-PZT-Mn single crystal (Gen. III) had the highest potential for application in the fields of SONAR transducers, high intensity focused ultrasound (HIFU), ultrasonic motors, and others.

• Journal of the Korean Ceramic Society
• /
• v.22 no.3
• /
• pp.35-40
• /
• 1985

The composition of the base glass was determined to be $Na_2O$ 15, $Fe_2O_3$ 35, $B_2O_3$ 0~20, $P_2O_5$ 30~50 by mole percent. The heating temperature for nucleation was determined by means of thermal expansion curve. Crystalline phases were investigated by X-ray diffraction method and I.R Spectra. Electrical conductivities of glass spec-imens were observed in the temperature range 25~20$0^{\circ}C$ The activation energies of these specimens were caculated. The results obtained were as follows : 1) The limit composition of the melts 15mol% $Na_2O$ 35mole% $Fe_2O_5$ 20mole% $B_2O_3$ 30mole% $P_2O_5$ was able to be formed into desired shapes during cooling, . 2) In the measurement of d. c conductivity($\delta$) on the glasses in the system $15Na_2O-35Fe_2O_3$-$B_2O_3$-(50-x) $P_2O_5$ the values decreased by replacing 5 mole% $P_2O_5$ with $B_2O_3$ 3) The d. c conducties of heat treated samples were increased by replacing $P_2O_5$ with $B_2O_3$ 4) $B_2O_3$ contributed to precipitate crystals such as${\gamma}$-$Fe_2O_3$ $Fe_3O_4$ which had the advantage of electronic conduction in heat treated samples. 5) The slope plotted Log($\delta$) versus 1/T in this glass system was linear in the measured temperature range.