• 한국세라믹학회지
• /
• 제30권2호
• /
• pp.164-168
• /
• 1993

Grinding of 3mol% Y-TZP enhanced the texturing of t-ZrO2, which is represented by the increased I(002)t/I(200)t peak intensity ratio, and an asymetric broadening of (111)t peak. The degree of texturing and asymetric broadening depended on a seversity of grinding. The asymetric (111)t peak broadening was resulted by the formation of r-ZrO2. When aged at 25$0^{\circ}C$ for 120h, r-ZrO2 transformed to t-ZrO2 due to the relief of stressed surface area and the amount of tlongrightarrowm transformation inversely varied with the I(002)t/I(200)t. The inverse dependence was interpreted by that the degree of texturing determines the magnitude of residual surface stress and the lattice relaxation of t-ZrO2, which causes the low temperature degradation, is retarded as the residual stress becomes greater.

• 대한의용생체공학회:의공학회지
• /
• 제15권2호
• /
• pp.189-194
• /
• 1994

Effects of ${AI_2O_3}/{P_2O_5}$ ratio on the crystallization of a series of glasses with the nominal composition of 41.4wt % $SiO_2$, 35.0wt % CaO, 20.6wt % (${P_2O_5}$+${AI_2O_3}$) and 3.0wt% MgO were investigated with DTA, XRD and SEM. The major crystalline phases are apatite and anorthite. The glass transition temperature ($T_g$) and the softening point ($T_s$) are shifted to the upper temperature by increasing $AI_2O_3$ content. The temperature of apatite crystallization ($T_{p1}$) is increased by $AI_2O_3$ content, but the tempera¬ture of anorthite crystallization ($T_{p2}$) is not affected significantly. With increased of $AI_2O_3$, the apatite crystallization is decreased, but anorthite crystallization is increased.

• 한국세라믹학회지
• /
• 제41권5호
• /
• pp.401-405
• /
• 2004

순수한 SrB $i_2$T $a_2$$O_{9}$ 세라믹스와 도너와 억셉터가 치환된 S $r_{0.99}$B $i_2$(T $a_{0.99}$ $W_{0.01}$)$_2$$O_{9}$ 와 SrB $i_2$(T $a_{0.99}$ $Ti_{0.01}$)$_2$ $O_{8.99}$ 세라믹스를 제조하고 미세구조, 강유전 P-E 이력특성, 상전이 온도를 조사하였다. 입자크기는 SrB $i_2$T $a_2$$O_{9}$ 세라믹스의 강유전 이력곡선에는 영향을 주지 않았다. 도너를 치환한 S $r_{0.99}$B $i_2$(T $a_{0.99}$ $W_{0.01}$)$_2$$O_{9}$ 세라믹스는 순수한 SrB $i_2$T $a_2$$O_{9}$ 세라믹스보다 잔류 분극이 크고 더욱 포화된 강유전 P-E 이력곡선을 보였으며, 억셉터가 치환된 SrB $i_2$(T $a_{0.99}$ $Ti_{0.01}$)$_2$ $O_{8.99}$ 세라믹스는 잔류분극이 크게 감소하여 가운데가 잘록한 모양을 보였다. 도너가 치환된 S $r_{0.99}$B $i_2$(T $a_{0.99}$ $W_{0.01}$)$_2$$O_{9}$ 세라믹스의 강유전 분극이 순수한 SrB $i_2$T $a_2$$O_{9}$ 세라믹스보다 더 큰 것은 Sr 공공의 생성에 의하여 분역벽 이동이 용이해졌기 때문이다.동이 용이해졌기 때문이다.동이 용이해졌기 때문이다.동이 용이해졌기 때문이다.

• 한국세라믹학회지
• /
• 제29권10호
• /
• pp.797-805
• /
• 1992

Al2O3-20 wt% ZrO2 composite powders to be used as the starting materials of the Al2O3/ZrO2-Spinel composite system were prepared by the use of the emulsion-hot kerosene drying method. The crystalline phase of ZrO2 in the synthesized Al2O3-ZrO2 composite powders was 100% tetragonal but the small amount of t-ZrO2 was transformed into m-ZrO2 after crushing. The hardness, fracture toughness, and flexural strength of the composite, which was sintered at 1650$^{\circ}C$ for 4 hrs after calcining at 1100$^{\circ}C$ for 2 hrs and had the relative density of 99%, were 15.7 GPa, 4.97 MN/m3/2, and 390 MPa, respectively. The fracture form in the sintered composites was found to be the intergranular fracture.

• 한국세라믹학회지
• /
• 제27권2호
• /
• pp.283-287
• /
• 1990

The study was aimed at investigating sintering characteristics, the overall properties from the ternary Li2O-Al2O3-SiO2 system. This system, which was considered without additives and selected five compositions, was studied with variation of the amount of SiO2. The reactivity of the system was observed by D.T.A.. Characteristics of sintering, microstructure, property and stability of produced phase were studied. It was found that because the range of sintering was narrow and the temperature of sintering was close to the melting temperature, the sintering by the general method was difficult. Also, these linear thermal expansion coeffecients were measured.

• 한국세라믹학회지
• /
• 제38권6호
• /
• pp.558-567
• /
• 2001

본 연구에서는 알콕사이드를 전구물질로 하는 졸겔공정을 이용하여 Bi 과잉 12 mol%의 조성인 B $i_4$ $Ti_3$ $O_{12}$ 박막과 B $i_4$ $Ti_{3-x}$T $a_{x}$ $O_{12}$(x=0.1, 0.2, 0.3) 박막을 제조하였다. XPS 분석에 따르면 Ta 치환 x=0.2에서 Bi 4f의 photoemission 곡선이 낮은 결합에너지로 이동하였고 피크 강도가 감소하는 현상이 관측되었다. 이는 x=0.1과 0.2 사이에서 Bi-O 결합이 길어져 인장상태 하에 있었음을 나타내었다. B $i_4$ $Ti_3$ $O_{12}$(BIT) 박막의 유전상수와 유전손실은 100 kHz에서 340, 0.05이었고, B $i_4$ $Ti_{3-x}$T $a_{x}$ $O_{12}$ 박막에서 이들 값은 x=0.1에서 가장 높았으며, 각각 480, 0.13이었다. B $i_4$ $Ti_3$ $O_{12}$ 박막의 잔류분극과 항전계는 1.24$\mu$C/$ extrm{cm}^2$, 31.4 kV/cm 이었으나, Ta 치환 x=0.2에서 이들 값은 각각 19.7$\mu$C/$\textrm{cm}^2$, 49.5 kV/cm 에 이르렀다. 또한, B $i_4$ $Ti_3$ $O_{12}$ 박막의 누설전류 밀도는 ~$10^{-6}$ A/$\textrm{cm}^2$ 정도이었으며, Ta 치환은 누설전류를 감소시켜 Ta 치환 x=0.2 이상에서 BIT 박막에 비해 한 차수 정도 낮아졌다. Ta 치환에 따른 B $i_4$ $Ti_3$ $O_{12}$ 전기 물성에서 변화는 Bi-O 결합에서 관측된 인장상태로의 전이와 연관성이 있었으며, 덧붙여 치환에서 생성된 전자에 의한 정공보상이 이에 영향을 끼쳤다. 정공보상이 이에 영향을 끼쳤다.끼쳤다.

• 한국세라믹학회지
• /
• 제42권3호
• /
• pp.150-154
• /
• 2005

Ferroelectric $Bi_{3.35}Sm_{0.65}Ti_{3}O_{12}(BSmT)$ thin films were synthesized by sol-gel process. In this experiments, $Bi(TMHD)_{3},\;Sm_{5}(O^{i}Pr)_{13},\;Ti(O^{i}Pr)_4$ were used as precursors, which were dissolved in 2-methoxyethanol. The BSmT thin films were deposited on the Pt/TiO/SiO/Si substrates by spin-coating. Thereafter, the thin films with the thickness of 240 nm were annealed from 600 to $720^{\circ}C$ in oxygen atmosphere for 1 h, and post-annealed in oxygen atmosphere for 1 h after deposition of Pt electrode to enhance the electrical properties. To investigate the effects of Sm-substitution in the BTO thin films, the BTO and BSmT thin films were prepared, respectively. The remanent polarization and coercive voltage of the BSmT thin films annealed at $720^{\circ}C$ were $19.48{\mu}C/cm^2$ and 3.40 V, respectively.

• 한국세라믹학회지
• /
• 제40권5호
• /
• pp.455-459
• /
• 2003

LPE(Liquid Phase Epitaxial)법을 이용하여 성장시킨 B $i_2$S $r_2$Ca(C $u_{1-x}$ N $i_{x}$ )$_2$ $O_{8+}$$\delta$/ 막(film)을 break junction 법을 이용하여 터널링 분광을 측정하였다. Ni 조성비 $\chi$$_{L}$의 증가에 따라 에너지 간격 2$\Delta$의 크기는 증가하였다. 에너지 간격 2$\Delta$(4.2 K)는 54.4~64 meV, 2$\Delta$/ $k_{B}$ $T_{c}$ $^{zero}$는 7.36~10.14로 BCS 이론에 의한 값 보다 큰 결과를 얻었다. 융액(melting solution) 속의 Ni 조성비 $\chi$$_{L}$의 증가에 따라, 임계온도 $T_{c}$ $^{zero}$와 격자상수 c-축의 길이는 감소하는 경향을 보였다.을 보였다.$^{zero}$와 격자상수 c-축의 길이는 감소하는 경향을 보였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.49-49
• /
• 2008

ZnO-based varistors have been widely used for voltage stabilization or transient surge suppression in electric power systems and electronic circuits. Recently, It has reported that the varistor behavior with nonlinear coefficient of 6~17 in Mn-doped ZnO. In this study we have chosen the composition of ZnO-$TeO_2-Mn_3O_4$ (ZTM) system to the purpose of whether varistor behavior appeared in doped ZnO by the solid state sintering or not. We investigated the sintering and electric properties of 0.5~3.0 at% Mn doped ZnO-1.0 at% $TeO_2$ system. Electrical properties, such as current-voltage (I-V), capacitance-voltage (C-V), and impedance spectroscopy were conducted. $TeO_2$ itself melts at $732^{\circ}C$ in air but forms the $ZnTeO_3$ phase with ZnO as increasing temperature and therefore retards the densification of ZnO to $1000^{\circ}C$. The average grain size of sintered samples was at about $3{\mu}m$ and decreased with increasing Mn contents. It was found that a good varistor characteristics were developed in ZTM system sintered at $1100^{\circ}C$ (nonlinear coefficient $\alpha$ ~ 60). The results of C-V characteristics such as barrier height ($\Theta$), donor density ($N_d$), depletion layer (W), and interface state density ($N_t$) in ZTM ceramics were $4\times10^{17}cm^{-3}$, 0.7 V, 40 nm, and $1.6\times10^{12}cm^{-2}$, respectively. It will be discussed about the stability and homogeneity of grain boundaries using distribution parameter ($\alpha$) simulated with the Z(T)"-logf plots in ZTM system.

• 센서학회지
• /
• 제25권6호
• /
• pp.440-446
• /
• 2016

This study introduces the characteristics of current-voltage (I-V) and impedance variance for $ZnO-Zn_2BiVO_6-Co_3O_4$ (ZZCo), which is sintered at $900^{\circ}C$, according to temperature changes. ZZCo varistor demonstrates dramatic improvement of non-linear coefficient, ${\alpha}=66$, with lower leakage current and higher insulating resistivity than those of ZZ ($ZnO-Zn_2BiVO_6$) from the aspect of I-V curves. While both systems are thermally stable up to $125^{\circ}C$, ZZCo represents a higher grain boundary activation energy with 1.05 eV and 0.94 eV of J-E-T and from IS & MS, respectively, than that of ZZ with 0.73 eV and 0.82 eV of J-E-T and from IS & MS, respectively, in the region above $180^{\circ}C$. It could be attributed to the formation of $V^*_o$(0.41~0.47 eV) as dominant defect in two systems, as well as the defect-induced capacitance increase from 781 pF to 1 nF in accordance with increasing temperature. On the other hand, both the grain boundary capacitances of ZZ and ZZCo are shown to decrease to 357 pF and 349 pF, respectively, while the resistances systems decreased exponentially, in accordance with increasing temperature. So, this paper suggests that the application of newly formed liquid phases as sintering additives in both $Zn_2BiVO_6$ and the ZZCo-based varistors would be helpful in developing commercialized devices such as chips, disk-type ZnO varistors in the future.