• Horticultural Science & Technology
• /
• v.34 no.6
• /
• pp.860-870
• /
• 2016

Continuous monitoring of environmental parameters provides farmers with useful information, which can improve the quality and productivity of crops grown in greenhouses. The objective of this study was to develop a greenhouse environment measurement system using a low-cost microcontroller with open-source software. Greenhouse environment parameters measured were air temperature, relative humidity, and carbon dioxide ($CO_2$) concentration. The ranges of the temperature, relative humidity, and $CO_2$ concentration were -40 to $120^{\circ}C$, 0 to 100%, and 0 to 10,000 ppm, respectively. A $128{\times}64$ graphic LCD display was used for real-time monitoring of the greenhouse environments. An Arduino Uno R3 consisted of a USB interface for communicating with a computer, 6 analog inputs, and 14 digital input/output pins. A temperature/relative humidity sensor was connected to digital pins 2 and 3. A $CO_2$ sensor was connected to digital pins 12 and 13. The LCD was connected to digital pin 1 (TX). The sketches were programmed with the Arduino Software (IDE). A measurement system including the Arduino board, sensors, and accessories was developed (totaling $244). Data for the environmental parameters in a venlo-type greenhouse were obtained using this system without any problems. We expect that the low-cost microcontroller using open-source software can be used for monitoring the environments of plastic greenhouses in Korea.

• Journal of Korean Medicine Rehabilitation
• /
• v.25 no.2
• /
• pp.1-13
• /
• 2015

Objectives Methicillin-Resistant Staphylococcus aureus (MRSA) is a human pathogen and a major cause of hospital-acquired infections. New antibacterial agents that have not been compromised by bacterial resistance are needed to treat MRSA-related infections. In this study, we investigated the antimicrobial activity ofethanol extract of Haedokgeumhwa-san (HGH) which prescription is composed of korean medicine against MRSA. Methods The antibacterial activity of HGH extract was evaluated against MRSA strains by using the Disc diffusion method, broth microdilution method (minimal inhibitory concentration; MIC), checkerboard dilution test, and time-kill test; its mechanism of action was investigated by bacteriolysis, detergent or ATPase inhibitors. The checkerboard dilution test was used to examined synergistic effect of ampicillin, oxacillin, ciprofloxacin, vancomycin, gentamicin and norfloxacin in combination with HGH ethanol extract. A time-kill assay was performed a survival curve which was obtained by plotting viable colony counts depending on time on bacterial growth. Results The minimum inhibitory concentration (MIC) of ethanol extract (HGH) ranged from 1,000 to $2,000{\mu}g/mL$ against all the tested bacterial strains, respectively. We are able to confirm that HGH extract has potentially strong antibacterial activity. In the checkerboard dilution test, fractional inhibitory concentration index of HGH in combination with antibiotics indicated synergy or partial synergism against S. aureus. A time-kill study showed that the growth of the tested bacteria was considerably inhibited after 8 hr of treatment with the combination of HGH with selected antibiotics. For measurement of cell membrane permeability, HGH $250{\sim}1,000{\mu}g/mL$ along with concentration of Triton X-100 (TX) and Tris-(hydroxymethyl) aminomethane (Tris) were used. In the other hand, N,N-dicyclohexylcarbodimide (DCCD) and Sodium azide ($NaN_3$) was used as an inhibitor of ATPase. TX, Tris, DCCD and $NaN_3$ cooperation against S. aureus showed synergistic action. Accordingly, antimicrobial activity of HGH was affected by cell membrane and inhibitor of ATPase. Conclusions These results suggest that Haedokgeumhwa-san extract has antibacterial activity, and that HGH extract offers a potential as a natural antibiotic against MRSA.

• The Journal of the Acoustical Society of Korea
• /
• v.39 no.5
• /
• pp.461-467
• /
• 2020

In noisy and multi-speaker environments, the performance of speech recognition is unavoidably lower than in a clean environment. To improve speech recognition, in this paper, the signal of the speaker of interest is extracted from the mixed speech signals with multiple speakers. The VoiceFilter model is used to effectively separate overlapped speech signals. In this work, clustering by Probabilistic Linear Discriminant Analysis (PLDA) similarity score was employed to detect the speech signal of the interested speaker, which is used as the reference speaker to VoiceFilter-based separation. Therefore, by utilizing the speaker feature extracted from the detected speech by the proposed clustering method, this paper propose a speaker diarization system using only the mixed speech without an explicit reference speaker signal. We use phone-dataset consisting of two speakers to evaluate the performance of the speaker diarization system. Source to Distortion Ratio (SDR) of the operator (Rx) speech and customer speech (Tx) are 5.22 dB and -5.22 dB respectively before separation, and the results of the proposed separation system show 11.26 dB and 8.53 dB respectively.

• Journal of the Microelectronics and Packaging Society
• /
• v.12 no.2 s.35
• /
• pp.105-109
• /
• 2005

A compact antenna switch module for GSM/DCS dual band applications based on multilayer low temperature co-fired ceramic (LTCC) substrate is presented. Its size is $4.5{\times}3.2{\times}0.8 mm^3$ and insertion loss is lower than 1.0 dB at Rx mode and 1.2 dB at Tx mode. To verify the stability of the developed module to the process window, each block that is diplexer, LPF's and bias circuit is measured by probing method in the variation with the thickness of ceramic layer and the correlation between each block is quantified by calculating the VSWR In the mean while, two types of bias circuits -lumped and distributed - are compared. The measurement of each block and the calculation of VSWR give good information on the behavior of full module. The reaction of diplexer to the thickness is similar to those of LPF's and bias circuit, which means good relative matching and low value of VSWR, so total insertion loss is maintained in quite wide range of the thickness of ceramic layer at both band. And lumped type bias circuit has smaller insertion itself and better correspondence with other circuit than distributed stripline structure. Evaluated ceramic module adopting lumped type bias circuit has low insertion loss and wider stability region of thickness over than 6um and this can be suitable for the mass production. Stability characterization by probing method can be applied widely to the development of ceramic modules with embedded passives in them.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.11
• /
• pp.58-63
• /
• 2013

This paper presents a transceiver design for DisplayPort interface using an optical channel. By converting the electronic channel to the optical channel, the DisplayPort's main channel can provide a high-speed data transmission for long distance. The design converting the electronic channel to the optical channel in the main channel and AUX channel of the DisplayPort is presented in this paper. Futhermore, the HPD signal transmission by using AUX channel is proposed. In order to minimize power consumption, this paper also proposed a method of controlling the TX block in the main link. The proposed system is designed by a FPGA and an optical module. The FPGA used 651 ALUT(adaptive look-up table)s, 511 resisters and 324 block memory bits. The maximum operating rate of the FPGA is 250MHz. With the proposed power control scheme, 740mW of power dissipation reduction can be achieved at the main link optical TX module.

• Journal of Acupuncture Research
• /
• v.22 no.2
• /
• pp.71-81
• /
• 2005

Objective : Dear antler (Cervus korean TEMMINCK var. mantchuricus Swinhoe) used for traditional immunosuppressive and immuno-activating action. The effect of deer antler herbal-acupuncture(DAH) solution, prepared by water extract method, on cathepsin activities in bone tissues (cartilage and synovial) cells from mouse rheumatoid arthritis (RA) model was studied. The cysteine endoprotease cathepsin mediates degradation of the MHC class II invariant chain (Ii) in human and mouse antigen-presenting cells. The studies described here examine the functional significance of cathepsin inhibition on autoantigen presentation and organ-specific autoimmune diseases in a murine model for RA. Methods : An animal model for RA in BALB/c mice thymectomized 3 days after birth (3d-Tx) was constructed All 3d-Tx BALB/c mice developed autoimmune lesions in the bone tissue cells, starting at 3 weeks of age, and the disease mediated by CD4+ T cells was chronic and progressive. Significant inhibitory effects of DAH solution on cathepsin S and L were observed in each organ in a dose-dependent manner. Moreover, we confirmed that cathepsin S and L activity in each organ were clearly inhibited by DAB solution. When we examined the inhibitory effects of DAH solution against autoantigen-specific T cell responses in vitro, in regional lymph node cells, but not in spleens, from model mice, a significant inhibitory effect of DAB solution was observed in a dose-dependent manner. DAH solution do not block T cell proliferation to Con A, indicated that the dose of DAB solution 10 to $20\;{\mu}g/m{\ell}$ was sufficient to inactivate the autoantigen-specific T cell responses in vitro. In vivo therapeutic effects of DAB solution were examined in a murine model for RA, autoantigen-specific (C-II-specific) T cell response were significantly inhibited in LNCs from DAH solution-treated mice. Results : Iinhibition of cathepsin S and L in vivo alters autoantigen presentation and development of organ-specific autoimmunity in RA model. Conclusion : These data identify selective inhibition of cysteine protease cathepsin S and L as a potential therapeutic strategy for autoimmune disease process such RA. Thus, DAH solution will served as a potent anti-inflammatory and anti-arthritic agents for treatment of human RA.

• Journal of IKEEE
• /
• v.7 no.2 s.13
• /
• pp.236-244
• /
• 2003

In this paper, RF and IF circuits for mobile terminals which have usually been implemented using expensive BiCMOS processes are designed using CMOS circuits, and a Tx CMOS RF/IF single chip for PCS applications is designed. The designed circuit consists of an IF block including an IF PLL frequency synthesizer, an IF mixer, and a VGA and an RF block including a SSB RF mixer and a driver amplifier, and performs all transmit signal processing functions required between digital baseband and the power amplifier. The phase noise level of the designed IF PLL frequency synthesizer is -114dBc/Hz@100kHz and the lock time is less than $300{\mu}s$. It consumes 5.3mA from a 3V power supply. The conversion gain and OIP3 of the IF mixer block are 3.6dB and -11.3dBm. It consumes 5.3mA. The 3dB frequencies of the VGA are greater than 250MHz for all gain settings. The designed VGA consumes 10mA. The designed RF block exhibits a gain of 14.93dB and an OIP3 of 6.97dBm. The image and carrier suppressions are 35dBc and 31dBc, respectively. It consumes 63.4mA. The designed circuits are under fabrication using a $0.35{\mu}m$ CMOS process. The designed entire chip consumes 84mA from a 3V supply, and its area is $1.6㎜{\times}3.5㎜$.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.423-424
• /
• 2011

This paper has proposed a 920 MHz RF front-end for IEEE 802.15.4g SUN (Smart Utility Network) systems. The proposed 920 MHz RF front-end consists of a driver amplifier, a low noise amplifier, and a RF switch. In the TX mode, the driver amplifier has been designed as a single-ended topology to remove a transformer which causes a loss of the output power from the driver amplifier. In addition, a RF switch is located in the RX path not the TX path. In the RX mode, the proposed low noise amplifier can provide a differential output signal when a single-ended input signal has been applied to. A LC resonant circuit is used as both a load of the drive amplifier and a input matching circuit of the low noise amplifier, reducing the chip area. The proposed 920 MHz RF Front-end has been implemented in a 0.18-um CMOS technology. It consumes 3.6 mA in driver amplifier and 3.1 mA in low noise amplifier from a 1.8 V supply voltage.

• Journal of Broadcast Engineering
• /
• v.15 no.1
• /
• pp.29-39
• /
• 2010

This paper presents and analyzes laboratory test results of distributed translator (DTxR) for distributed frequency network (DFN) in the ATSC (Advanced Television Systems Committee) terrestrial digital TV broadcasting system. The DTxR laboratory test is classified to receiving part test and transmitting part test. The receiving part test includes dynamic range, random noise, single echo, and adjacent channel interference. The transmitting part test includes quality of output signal (out-of channel emission, quality of transmitting signal, and phase noise), frequency synchronization among output signals, and TxID (Transmitter Identification) signal's affect to the legacy receiver. By the laboratory test results, the receiving part of DTxR eliminates average -2.5 dB of single echo and has average 17.5 dB at TOV (Threshold of Visibility) under random noise environment. In addition, the transmitting part of DTxR satisfies the specification of US FCC (Federal Communications Commission), and frequency difference among DTxR output signals is less than 0.001 Hz.

• Journal of the Korean Vacuum Society
• /
• v.14 no.4
• /
• pp.207-214
• /
• 2005

This paper presents a channel structure for promising high performance pseudomorphic high electron mobility transistor(pHEMT) switching device for design and fabricating of microwave control circuits, such as switches, phase shifters, attenuators, limiters, for application in personal mobile communication systems. Using the designed epitaxial channel layer structure and ETRI's $0.5\mu$m pHEMT switch process, single pole double throw (SPDT) Tx/Rx monolithic microwave integrated circuit (MMIC) switch was fabricated for 2.4 GHz and 5 GHz band wireless local area network (WLAN) systems. The SPDT switch exhibits a low insertion loss of 0.849 dB, high isolation of 32.638 dB, return loss of 11.006 dB, power transfer capability of 25dBm, and 3rd order intercept point of 42dBm at frequency of 5.8GHz and control voltage of 0/-3V These performances are enough for an application to 5 GHz band WLAN systems.