• Journal of electromagnetic engineering and science
• /
• v.3 no.2
• /
• pp.99-103
• /
• 2003

For mobile multimedia systems that equip transmit diversity for a forward channel, it is well known that the Tx diversity technique is appropriate for high rate mobile multimedia communications. In this paper, we propose a STTD (Space Time Transmit Diversity) receiver, which incorporates the design of the Tx diversity receiver without the mutual interference of antenna by using a CCI cancellation technique. The new STTD receiver is simulated and its performance is analyzed in a DS-CDMA/QPSK. Adopting the proposed STTD receiver at $10^{-2}$TEX>∼$10^{-4}$TEX> in bit error rate, SNR of 0.5 ㏈∼2 ㏈ performance improvement in AWGN and Rayleigh fading environments has been achieved.

• Bulletin of the Korean Mathematical Society
• /
• v.39 no.1
• /
• pp.63-69
• /
• 2002

Given vectors x and y in a Hilbert space, an intepolating operator is a bounded operator T such that Tx=y. an interpolating operator for n vectors satisfies the equation Tx$_{i}$=y, for i=1, 2,…, n. In this article, we obtained the fellowing : Let x = (x$_{i}$) and y = (y$_{i}$) be two vectors in H such that x$_{i}$$\neq$0 for all i = 1, 2,…. Then the following statements are equivalent. (1) There exists an operator A in AlgＬ such that Ax = y, A is a trace-class operator and every E in Ｌ reduces A. (2) (equation omitted).mitted).

• Proceedings of the KIEE Conference
• /
• 2004.07c
• /
• pp.2055-2057
• /
• 2004

The Ku band that has been using for the satellite communication and broadcasting would be changed to K/Ka bands. The satellite system requires the antenna structure to fabricate low loss and small antenna that is able to be integrated with other Rf circuits for both Rx and Tx. So we should design it with dual feed antennas at K/Ka bands, high isolation between two different feeds and broadband circular polarization. This paper proposes the LTCC(Low Temperature Co-fired Ceramic) process for integration with other Rf circuits and the Axial mode of the helical antenna to satisfy those requirements.

• ETRI Journal
• /
• v.32 no.2
• /
• pp.327-329
• /
• 2010

A fully integrated small form-factor HBT power amplifier (PA) was developed for UMTS Tx applications. For practical use, the PA was implemented with a well configured bottom dimension, and a CMOS control IC was added to enable/disable the HBT PA. By using helix-on-pad integrated passive device output matching, a chip-stacking technique in the assembly of the CMOS IC, and embedding of the bulky inductive lines in a multilayer substrate, the module size was greatly reduced to 2 mm ${\times}$ 2.2 mm. A stage-bypass technique was used to enhance the efficiency of the PA. The PA showed a low idle current of about 20 mA and a PAE of about15% at an output power of 16 dBm, while showing good linearity over the entire operating power range.

• Proceedings of the IEEK Conference
• /
• 2004.06a
• /
• pp.75-78
• /
• 2004

In this paper, we analyze the performance of transmitter and receiver of W-CDMA system using the channel coding and space time code in downlink over ITU-R realistic channel model. We can improve the data rate and the reliability of communications by a channel code, and we can get a diversity gain by using the space time code over fading channels. We also apply the RAKE receiver to improve a performance in multi-path fading channel environment.

• Korean Journal of Soil Science and Fertilizer
• /
• v.46 no.5
• /
• pp.359-364
• /
• 2013

This study was conducted to develop a model to estimate crop leaf surface temperature. The results were as following; A definition for the daily time based on elapsed time from the midnight (00:00) as "E&E time" with the unit of Kmin. was suggested. The model to estimate the scaled temperature ($T^*e$) of crop leaf surface temperature by scale factor ($T^*$) according to the "E&E time : Kmin."(X) was developed as eq. (1) $T^*e=0.5{\cdot}sin(X+780)+0.5$ (2) $T^*=(Tx-Tn)/(Tm-Tn)$, Tx : Daily leaf temperature, Tm : Daily maximum leaf temperature, Tn : Daily minimum leaf temperature. Relative sensitivity of the measured temperature compared to the estimated temperature of red pepper, soybean and persimmon was 1.078, 1.033 and 0.973, respectively.

• The Journal of the Korean dental association
• /
• v.54 no.5
• /
• pp.328-341
• /
• 2016

An overall reduction in the horizontal and vertical dimensions occurs following tooth extraction and the resorption of the buccal part of the ridge is more pronounced than the lingual part. Thus, the resulting morphology of the healed alveolar ridge is often presenting with a discrepancy in bone height between the buccal and lingual aspects of the ridge. The implant with a sloped marginal configuration that is designed to match the sloped contour of the alveolar ridge provides the opportunity to maintain the buccal-lingual bone discrepancy and soft tissue around the implant. This paper introduces the OsseoSpeed TX Profile implants with sloped marginal configuration and explains the characteristics and clinical meanings of those implants.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.6 no.1
• /
• pp.5-13
• /
• 2000

This evaluation was made through 11 persons who discogenic disease and it emergency disease. There was all complains low back. with sustained buttock pain with radiating to the leg due to piriformis syndrome during the period of march 2000 to November 1999 in seoul wooridul hospital. The purpose of this study was to determine the effect of manual therapy through 11 persons. The results were as follow : 1. Right buttock pain group(n = 11). there was significant difference before manual treatment(P<.05). 2. Pain decreased before Tx then after Tx by VAS.

• Journal of electromagnetic engineering and science
• /
• v.16 no.4
• /
• pp.206-209
• /
• 2016

This letter proposes a reconfigurable directional coupler that uses a variable impedance mismatch reflector to achieve high isolation characteristics in the antenna front end. The reconfigurable coupler consists of a directional coupler and a single-pole four-throw (SP4T) switch with different load impedances as a variable load mismatch reflector. Selection of the load impedance by the reflector allows cancellation of the reflected signal due to antenna load mismatch and the leakage from the input to isolation port of the directional coupler, resulting in high isolation characteristics. The performance of the proposed architecture in separating the received (Rx) signal from the transmitted (Tx) signal in the antenna front end was verified by implementing and testing the reconfigurable coupler at 917 MHz for UHF radio-frequency identification (RFID) applications. The proposed reconfigurable directional coupler showed an improvement in the isolation characteristics of more than 20 dB at the operation frequency band.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.1
• /
• pp.87-92
• /
• 2008

This study presents the design methods that will enable high speed communication companies to establish high efficiency optical communication network at a low cost. This study compares and analyzes CWDM and DWDM technology that transmit multiple optical signals through an optic core, and describes compensation of deteriorated optical signal, which occurs in long distance data transmission, through the stabilization of TX/RX terminal to enable long distance data transmission. CWDM based line access multiplexer increases concentration efficiency by eight times by providing 4:1 concentration subscriber network.