• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 1998년도 추계학술대회 및 정기총회
• /
• pp.204-208
• /
• 1998

The fundamental issues to evaluate machine tool's performance through simulation pertain to the physical models of the machine tool itself and of process while the practical problems are related to the development of the modular software structure. It allows the composition of arbitrary machine/process models along with the development of programs to evaluate each state of machining process. Surface roughness is one of the fundamental factors to evaluate machining process and performance of machine tool, but it is not easy to evaluate surface roughness due to its tribological complexity. This paper presents an algorithm to calculate surface roughness considering cutting geometry, cutting parameters, and contact dynamics of cutting between tool and workpiece as well as tool wear in turning process. The designed virtual machining system can be used to evaluate the surface integrity of a turned surface during the design and process planning phase for the design for manufacturability analysis of the concurrent engineering.

• 한국시뮬레이션학회논문지
• /
• 제8권1호
• /
• pp.19-33
• /
• 1999

The fundamental issues to evaluate machine tools performance through simulation pertain to the physical models of the machine tool itself and of process while the practical problems are related to the development of the modular software structure. It allows the composition of arbitrary machine/process models along with the development of programs to evaluate each state of machining process. Surface roughness is one of the fundamental factors to evaluate machining process and performance of machine tool, but it is not easy to evaluate surface roughness due to its tribological complexity. This paper presents an algorithm to calculate surface roughness considering cutting geometry, cutting parameters, and contact dynamics of cutting between tool and workpiece as well as tool wear in turning process. This proposed algorithm could be used in the designed virtual machining system. The system can be used to evaluate the surface integrity of a turned surface during the design and process planning phase for the design for manufacturability analysis of the concurrent engineering.

• 한국공작기계학회논문집
• /
• 제10권5호
• /
• pp.31-38
• /
• 2001

This paper deals with the micro turning property of setting angle using diamond tool. The bed of the system has used the granite which has the thermal and vibrational characteristics superior to the cast iron bed for the common machine tool. To minimize the inner and outer vibration of the fuming system, an air pad system was manufactured and tested. The aero-static spindle system which has the excellent rotation accuracy was designed and manufactured. As a result of the micro-cutting test on aluminum alloy, tool setting angel have effected on surface roughness. From the results, the micro-cutting conditions hope to provide the useful actual data using in industrial fields.

• 대한전자공학회논문지TC
• /
• 제40권9호
• /
• pp.392-397
• /
• 2003

Lange 커플러를 이용한 반사구조 위상변위기는 광대역에서 위상변이를 얻는데 사용되는 회로이다. 이런 5-비트 반사구조에서 33.75°는 대개 11.25°와 22.5°를 동시에 "on"시켜서 얻는 방법이 사용되어져 왔다. 본 논문은 33.75° 위상특성을 개선하기 위하여 GaAs PM 다이오드와 리액티브 부하로 구성된 별도의 회로를 제안하였으며 MMIC로 구현하였다. 2-6 GHz에서 제안된 회로는 기 발표 논문에 비하여 33.75°를 기준으로 할 때 평균 4.7° 개선된 특성을 얻었다. 기존 회로와 비교할 때 삽입손실 및 반사손실은 거의 변화가 없었다.

• 전력전자학회논문지
• /
• 제17권3호
• /
• pp.266-273
• /
• 2012

In this paper, the new open fault detection and tolerant operation method for 3 phase PWM rectifier is proposed. When open fault occurred on the inverter switches of 3 Phase PWM rectifier, the DC link voltage ripple is increased because the input current of the faulty phase is distorted. In this case, the quality of electric power would decrease, and the life time of DC link capacitor is decreased. The open fault is detected by a simple MRAS(Model Reference Adaptive System) without additional hardware sensors, and the tolerant operation carried out by turning on the opposite switch of the faulty switch without any redundancy. By the proposed method, the faulty phase input current can be controlled, so that 3-phase input current is balanced relatively under the faulty condition and the voltage ripple of DC link output is reduced. The validity of the proposed technique is proved on the 6kW 3-phase PWM rectifier system by simulation and experiment.

• 한국ITS학회 논문지
• /
• 제2권1호
• /
• pp.41-52
• /
• 2003

본 연구의 목적은 기존 신호운용체계의 효율적인 운용과 안전한 보행자 통행시간을 보장한다는 전제하에, 신호교차로 에서 보행자신호로 인해 발생하는 불합리한 좌회전차량의 꼬리물림현상과 우회전차량 진행불가현상이 직진 교통류에 미치는 소통장애를 해소하는 방안을 제시하는 것이다. 본 연구에서 제시하는 방안은 차량직진신호 점등 후 몇 초 정도의 시차(步行者信號 前時間)를 두고 보행자신호를 운용함으로써 보행이 시작되기 전에 회전교통류가 교차로에서 소거되도록 하는 것이다. 이를 위하여 첨두시간에 교차로에서 보행자신호 전시간을 점차 확장시키는 방법으로 좌회전 꼬리물림$\cdot$우회전 진행불가차량 발생현상을 현장조사 하였으며, 분석결과는 다음과 같다. 첫째, 보행자신호 전시간을 연장할수록 직진교통류 소통장애를 야기하는 좌회전 꼬리물림현상과 우회전 진행불가현 상이 현저히 감소하였다. 둘째, 교차로와 횡단보도간의 대기공간이 수용할 수 있는 범위 내에서는 좌회전 꼬리물림차량과 우회전 진행불가차량도 직진차량에 장애를 주지 않았다. 셋째, 이중 횡단보도에서는 신호현시체계상 좌회전 꼬리물림현상이 발생치 않으며 우회전 진행불가현상은 충분한 대기공간으로 인해 직진차량에 미치는 영향이 미미하였다. 검증 결과 보행자신호 전시간 부여는 교차로 소통효율성 증진에 유의한 것으로 판단되었으며 이를 운용하기 위해서는 회전교통량과 횡단보도의 위치$\cdot$종류에 따라 개개 교차로별로 보행자신호 전시간이 설정되어야 한다는 결론을 얻었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1812-1818
• /
• 2005

Even though SMA actuators have high power to volume ratio, there exist disadvantages such as hysteresis and saturation. So the model identification for SMA actuators is very difficult. For the qualitative model identification, we described the behavior of SMA actuators using a so-called diagonal model, which can readily expect the turning point of an incomplete phase transformation. For the quantitative model identification, we developed the general dynamics of SMA actuators using the modified Liang's model. Using this dynamics we can describe the hysteresis and the saturation very well. It is also very important to notice that the modified Liang's model maintains a continuous martensite fraction at the change of the phase transformation but the original model cannot.

• Journal of Electrical Engineering and Technology
• /
• 제13권4호
• /
• pp.1623-1630
• /
• 2018

Normally, various auxiliary loads are installed along with the main load in industrial applications. Usually, load transformers are used to convey such types of auxiliary loads. The transformers become energized when the loads are turned-on, consequently, high amplitude of inrush current appears at the output of the uninterrupted power supply (UPS) system. To mitigate these high current amplitudes, this manuscript suggests a three-phase line-interactive UPS system to counter the inrush current during the turning-on of the auxiliary load transformer while powering the main load by using a current controlled inverter. Experimental results of a laboratory-sized prototype are provided in the support of the proposed UPS system for validation.

• Nuclear Engineering and Technology
• /
• 제55권3호
• /
• pp.1118-1124
• /
• 2023

Experimental study on the fluidelastic instability (FEI) of a curved tube bundle in single phase downward cross flow is investigated for the design qualification and analysis input preparation of helical coiled steam generator tubing. A 6×9 normal square curved tube array with equal and different vertical/horizontal pitch-to-diameter ratio was under-tested up to 6 m/s in term of gap flow velocity to measure the critical velocity for FEI. The critical velocity for FEI was measured at the turning point from the vibration amplitude plot along the gap flow velocity. Our test results were compared with straight tube results and published data in the design guideline. The applicability of the current design guidelines to a curved tube bundle is also assessed. We found that introducing frequency difference in a curved tube array increases the critical velocity for fluidelastic instability.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1994년도 Proceedings of the Korea Automatic Control Conference, 9th (KACC) ; Taejeon, Korea; 17-20 Oct. 1994
• /
• pp.647-652
• /
• 1994

In the previous paper, we presented a new guidance law for a missile during boost phase. Thus, this paper deals with the guidance law for a missile after the thrust cutoff against an accelerating and turning target. It is essentially based on the concept of proportional navigation. Some simulation studies were performed using a three dimensional mathematical model of an air-to-air missile and the effectiveness of the guidance law presented was shown.