• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.53 no.3
• /
• pp.129-134
• /
• 2004

The Available Transfer Capability (ATC) is defined as the measure of the transfer capability remaining in the physical transmission network for further commercial activity above already committed uses. The ATC determination s related with Total Transfer Capability (TTC) and two reliability margins-Transmission Reliability Capability (TRM) and Capacity Benefit Margin(CBM) The TRM is the component of ATC that accounts for uncertainties and safety margins. Also the TRM is the amount of transmission capability necessary to ensure that the interconnected network is secure under a reasonable range of uncertainties in system conditions. The CBM is the translation of generator capacity reserve margin determined by the Load Serving Entities. This paper describes a method for determining the TTC and TRM to calculate the ATC in the Bulk power system (HL II). TTC and TRM are calculated using Power Transfer Distribution Factor (PTDF). PTDF is implemented to find generation quantifies without violating system security and to identify the most limiting facilities in determining the network’s TTC. Reactive power is also considered to more accurate TTC calculation. TRM is calculated by alternative cases. CBM is calculated by LOLE. This paper compares ATC and TRM using suggested PTDF with using CPF. The method is illustrated using the IEEE 24 bus RTS (MRTS) in case study.

• Proceedings of the Korea Institutes of Information Security and Cryptology Conference
• /
• 1992.11a
• /
• pp.81-98
• /
• 1992

본 논문에서는 TRM을 이용한 사용자의 ID를 기초로 하는 암호시스템을 구현하고 안전성 유지를 위해 반드시 필요한 TRM과 사용자사이의 쌍방인증방식을 설명하였다. 그리고 이의 개선된 방식으로서 키 생성키인 마스터키를 다중화 하여 TRM내에 국소 분배함으로써 TRM내의마스터 키를 시스템 상에서 보호하는 방안과 TRM Identity(TID)를 이용한 디지탈 서명방식을 제안하였다. 제안된 방식은 암/복호화의 속도가 빠른 관용 암호알고리듬을 사용하면서도 디지탈 서명을 비롯한 공개키 암호알고리듬이 가지고 있는 장점들을 모두 구현하고 있다.

• Journal of Korean Association for Spatial Structures
• /
• v.24 no.1
• /
• pp.29-36
• /
• 2024

The paper presents the experimental investigation of RC beams retrofitted with Textile Reinforced Mortar (TRM), featuring enhanced bond capacity. Anchoring systems, including an extension of retrofitting length and the use of chemical anchors, are newly employed to improve the structural performance of the RC beam retrofitted with TRM. For the experimental investigation, a total of seven shear-critical RC beams, with and without stirrups, were designed and constructed. The structural behaviors of specimens retrofitted with the proposed TRM methods were compared to those of non-retrofitted specimens or specimens strengthened with conventional TRM methods. Crack pattern, force-displacement relationship, and absorbed energy were evaluated for each specimen. The experimental results indicate a significant improvement in the shear capacity of the RC beam with the proposed retrofitting method. Therefore, it is concluded that the application of an extended retrofitting length and chemical anchors to the TRM retrofitting method can effectively enhance the bond capacity of TRM, thereby improving the shear performance of RC beams.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.39 no.1
• /
• pp.140-152
• /
• 2016

It is very important for the competitiveness and sustainable management of enterprises that the rapid changes in the managerial environments quickly and accurately are responded. For example, the large-scale investment accompanied by bad alternatives in accordance with misunderstanding of the managerial environments yields the huge cost and effort to modify and improve. In firm management, the quality of products and the productivity are influenced by changes of the endogenous factors yielded in manufacturing process and the exogenous factors as market, etc. These changes include not only changes in 4M (man, machine, material, method) but also those in the market, competitors, and technologies in the process of commodification, i.e., first, such disturbances make dispersion of the process big and odd. By Shewhart chart it can be checked that the process monitored is control-in or out. Business administration executes activities for input stabilization by monitoring changes in 4Ms, comparing with the standards, and taking measures for any abnormality. Second, TRM (technology road map) is to prospect product deployment and technological trend by predicting technologies in the competitive environment as the market, and to suggest the future directions of business. So, TRM must be modified and improved according to DR (design review) stages and changes in mass-production like input material change. Therefore, a role of TRM in input stabilization for reducing cost and man-hour is important. This study purposed to suggest that the environment changes are classified into endogenous factors and exogenous factors in production process, and then, quality and productivity should be stabilized efficiently through connection between TRM and input stabilization, and to prove that it is more effective for the display industry to connect TRM with input stabilization rather than to use TRM separately.

• Journal of Information Technology Services
• /
• v.8 no.2
• /
• pp.89-115
• /
• 2009

A Technology Roadmap (TRM) is extensively used as a tool to manage activities of researching and developing technologies and products that can help a business achieve its goals. However, most of past studies on TRMs have limited themselves to developing in a single product or a single industry level. Few research studies have examined how TRM are used for convergence products and services for future development. The aim of this chapter is to introduce a TRM development methodology for u-City technologies and to consider its possible application at the R&D program level in Korea. This research suggests ways to develop a TRM in u-City development by segmenting u-City technologies, projecting TRM for each technology and designing TRM templates for evaluating both current and future technologies. In addition, the study further highlights to prioritize which technology is favorable for the implementation based on its economic feasibility and technological maturity.

• Information Systems Review
• /
• v.5 no.2
• /
• pp.183-202
• /
• 2003

In this paper, we designed an interoperability evaluation system based on technical reference model, HanTRM (Technical Reference Model) and the information technology architecture methodology, TAProcess (Technical Architecture Process). TAProcess provides standardized procedure and methodology for the efficient installation, management and operation of information technology. HanTRM can be used as a referencial basic framework for all organizations which are starting to make technical reference model. We propose a method that utilize HanTRM and a procedure that evaluates interoperability between information systems to design interoperbility evaluation system. So, this interoperbility evaluation system will be more usefully applied to organizations.

• BMB Reports
• /
• v.57 no.1
• /
• pp.30-39
• /
• 2024

Directed evolution (DE) of desired locus by targeted random mutagenesis (TRM) tools is a powerful approach for generating genetic variations with novel or improved functions, particularly in complex genomes. TRM-based DE involves developing a mutant library of targeted DNA sequences and screening the variants for the desired properties. However, DE methods have for a long time been confined to bacteria and yeasts. Lately, CRISPR/Cas and DNA deaminase-based tools that circumvent enduring barriers such as longer life cycle, small library sizes, and low mutation rates have been developed to facilitate DE in native genetic environments of multicellular organisms. Notably, deaminase-based base editing-TRM (BE-TRM) tools have greatly expanded the scope and efficiency of DE schemes by enabling base substitutions and randomization of targeted DNA sequences. BE-TRM tools provide a robust platform for the continuous molecular evolution of desired proteins, metabolic pathway engineering, creation of a mutant library of desired locus to evolve novel functions, and other applications, such as predicting mutants conferring antibiotic resistance. This review provides timely updates on the recent advances in BE-TRM tools for DE, their applications in biology, and future directions for further improvements.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.727-732
• /
• 2014

The goal is to find the position of the sound source with the TRM at reflections and refractions environment. The Fermat's principle applied to the ray tracing method are expected to follow the acoustic path in order to obtain acoustic distance and transmittance to. Utilizing them in the TRM was confirmed rear reflectance affect on estimated position, resolution and side lobe. And the TRM performance were superior to one of the beam forming techniques.

• Journal of Environmental Impact Assessment
• /
• v.7 no.1
• /
• pp.63-70
• /
• 1998

TCM has been used for many environmental impact assessments in Korea. But there was reported that an error was found in area source calculation of original TCM and modified. In this study, TUM(TCM-urban mode) and TRM(TCM-rural mode) were developed for urban and rural area by modification of original TCM. McElroy-Pooler dispersion parameter was used for area and point source in TUM, Pasquill-Gifford parameter was used for area and point source in TRM. And Irwin's vertical wind speed profile exponents were used for TUM and TRM. Then predicted value by TUM, TRM and a value from the same area and point data by CDM2, ISCLT3 were compared. And it was found that predicted value from point source by TUM, TRM was very similar to a value by CDM2, ISCLT3, and predicted value from area source by TRM was similar to a value by CDM2, ISCLT3. But predicted value from area: source by TUM was an half lower than a value by CDM2, ISCLT3.

• Asian Journal of Innovation and Policy
• /
• v.2 no.1
• /
• pp.63-96
• /
• 2013

There is the need for performance evaluation and the identification of key success factors for utilizing technology roadmaps (TRM), but relevant research does not yet exists in this field. In Korea, the Small and Medium Business Administration has implemented the "Support Program for the Individual Company Technology Roadmaps" to promote the establishment of technology development strategies by SMEs. This study developed the framework and indices for performance analysis, designed and implemented survey for TRM performance analysis, and analyzed TRM performance of the companies that have participated in the above program from 2008 to 2011. This study compared the supported 97 companies and 102 companies not supported and analyzed quantitative and qualitative performance and satisfaction levels among the supported companies to compare low-performance companies and high-performance companies. This study aims to examine the KSF of TRM in terms of input and process. Also we suggested significant insights into the performance of TRM in terms of output.