• 한국도로학회:학술대회논문집
• /
• 2009.11a
• /
• pp.265-270
• /
• 2009

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.3
• /
• pp.1131-1142
• /
• 2013

This study aims to verify the applicability of TRANSIMS (TRansportion ANalysis SIMulation System) in interrupted traffic flow through calibration and validation process based on observation data; such as headway, traffic volume, speed, and travel time from Dalguberl Boulevard in Dae-gu metropolitan city. On this study, several micro-simulation parameters are derived from the calibration and validation process through performing a headway comparison and applying an ID back tracking methodology. As a result, it is figured out that actual circumstances of Korean roadway; for example, traffic volume per lane, speed, and travel time, can be applied on the TRANSIMS. Especially, it was possible to find out the influence of cell size parameter to traffic flow characteristic of simulation. However, it is hard to conclude that TRANSIMS is applicable to Korean roadway environment with studying particular target area. Therefore, additional studies; such as more case studies with various types of road, signal, and land use, will be required to localize TRANSIMS to Korea.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.13 no.2
• /
• pp.29-40
• /
• 2010

Car simulation by TRANSIMS is able to rapidly analyze the broad area based on CA(Cellular Automata) theory, which is the great advantage compared to other existing programs. As the source code of TRANSIMS is open, it may be modified by incorporating the network and traffic characteristics. This study uses the traffic thematic map built in the Korean National Traffic DB(KTDB) center among input date used for building network data of TRANSIMS. However, because the traffic thematic map is not composed as the type required by TRANSIMS, it was corrected and complemented to build a network, and the traffic volume at arterial roads and the traffic volume at each direction of the intersection was calculated through simulation for the area of Suseong-Gu, Daegu Metro. This was compared to the actual traffic volume. As a result of the simulation, it shows error from 14% to 42% at intersection, and from 3% to 8% at arterial roads. This result is very satisfactory because the entire traffic volume of Daegu Metro was not considered, and the tendency of drivers avoiding path due to construction on certain section, the status of road surface and chronic congestion was not reflected.

• 한국도로학회:학술대회논문집
• /
• 2009.11a
• /
• pp.297-302
• /
• 2009

• 한국도로학회:학술대회논문집
• /
• 2009.11a
• /
• pp.307-312
• /
• 2009

• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.85-85
• /
• 2011

기존 과속단속카메라의 한계와 더불어 차량의 속도 거동이 더욱 순화될 필요가 제기됨에 따라 국내에서는 2007년 12월 16일 영동고속도로 둔내터널에서 처음 구간과속단속시스템을 도입하였다. 현재 고속국도 6개소를 포함하여 총 8개소에서 구간과속단속시스템을 운영하고 있다. 하지만 해당 시스템의 도입효과가 명확하지 않아 시스템의 효과에 대한 의문도 꾸준히 제기되고 있다. 본 연구에서는 미국 Los Alamos연구에서 개발된 TRANSIMS(TRansportation Analysis and SIMulation System)의 시뮬레이션 결과를 이용해 시스템 적용 전 후의 거시적 교통류 특성을 수집하여 효과에 대하여 분석하였다. 본 연구에서는 구간과속단속시스템의 효과를 분석하기 임의의 네트워크를 제작하여 모의실험을 해 보았다. 네트워크는 총 연장 12km의 직선형 구간으로 제작하였다. 모의실험에 사용되는 링크의 Cell크기는 3m로 설정하여 TRANSIMS의 내정값인 7.5m보다 더욱 상세한 결과가 나오도록 설정하였다. 링크는 편도 3차로로 설정하여 모의실험을 실시하였으며, 구간단속이 미치는 영향을 실제와 유사하게 적용하기위해 모의실험을 하는 링크의 제한속도를 구간단속 실시 전에는 160km/h, 실시 후에는 100km/h로 설정하였다. 구간단속 실시 전 링크의 제한속도를 160km/h로 높게 설정한 것은 실제 통행이 발생하는 속도를 구현하기위해서이며, 차종별 최대 속도를 제한하여 속도분포를 나타내었다. TRANSIMS를 통한 구간과속단속시스템의 효과를 분석하는 모의실험 결과 그림 1의 그래프에서 나타나는 것과 같이 구간단속 전 후에서 속도저감효과가 나타나는 것을 확인 할 수 있었다. 특히, 교통류율이 낮을 때 속도가 높게 나타나던 부분이 구간단속 실시 후 속도가 낮아지는 것을 보아 실제로 교통류율이 낮은 고속국도에서는 높은 효과를 기대할 수 있다고 판단된다. 표 1에서 구간단속 전 후의 주행차량의 속도변화를 살펴보면 과속운행의 비율이 상당히 주는 것을 확인할 수 있다. 이러한 특성 때문에 교통량이 비교적 적은 고속국도에서는 뛰어난 효과를 발휘할 것이라고 예상된다.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.4 no.2 s.7
• /
• pp.53-66
• /
• 2005

Microscopic simulation models, which focus on individual vehicles, are used extensively in the transportation operations in order to capture vehicle to vehicle and vehicle to traffic controls. There are many important factors involved when a micro simulation model is applied as an evaluation tool for the traffic system. They typically include test bed, software, simulation time period, measure of effectiveness, parameter for a software, OD matrix, and random seed number. To evaluate the effects of those factors, sensitivity analysis was performed to identify the effects of those factors based on CORSIM and TRANSIMS results. Three freeway corridors, two in Houston (I-10 and US 290) and one in Sin Antonio (I-37), were chosen as test beds. Three time periods (AM, PM, off-peak) and three OD matrix estimates were used for the analysis. It was found that the micro-simulation results were highly sensitive to the model Parameter sets and the OD information. The degree of sensitivity was a function of the test bed and time period.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.6
• /
• pp.31-39
• /
• 2012

This study aims to suggest a methodology of localizing and calibrating parameters, such as acceleration, deceleration, and lane changing which are the basis of car following model in interrupted traffic flow to overcome the limitation of origin and destination based transportation simulation and to verify the application of activity-based model for use in Korean roadway condition in a large scale area or a city. Especially, we figured out that a proper cell size reflecting Korean traffic conditions is 1.0m rather than 7.5m which is default size and a methodology of tracking vehicle behavior characteristics through tracking vehicle ID is suggested on this study. In addition, vehicle running characteristics in real interrupted traffic flow is analyzed through subdividing vehicle types and updating vehicle type ratio. For verification of suggested model, some portion of Dalgubyul-ro in the Daegu city is tested, and the possibility of realization of interrupted traffic flow in simulation is studied.