• Journal of Distribution Science
• /
• v.13 no.7
• /
• pp.41-51
• /
• 2015

Purpose - This study analyzes loading efficiency by loading pattern for package standardization and reduction of logistics costs, along with the creation of revenue for the revenue review panel (RRP) of Membership Wholesale Clubs (MWC). The study aims to identify standard dimensions that can help improve the compatibility of the pallets related to display patterns preferred by the MWC and thereby explore ways to enhance logistics efficiency between manufacturers and retailers through standardization. Research design, data, and methodology - The study investigates and analyzes the current status based on actual case examples, i.e., manufacturer A and Korea's MWC (A company, B company, and C company), and thus devises improvement measures. To achieve this, the case of manufacturer A delivering to MWC was examined, and the actual pallet display patterns for each MWC were investigated by visiting each distribution site. In this study, TOPS (Total Optimization Packaging Software, USA) was used as the tool for pallet loading efficiency simulations the maximum allowable dimension was set to 0.0mm to prevent the pallet from falling outside the parameters, and the loading efficiency was analyzed with the pallet area. In other words, the study focused on dimensions (length x width x height) according to the research purpose and thereby deduced results. Results - The analysis of pallet loading patterns showed that the most preferred loading patterns for loading efficiency according to product specification, such as pinwheel, brick, and block patterns, were used in the case of the general distribution products, but the products were configured with block patterns in most cases when delivered to MWCs. The loading efficiency by loading pattern was analyzed with respect to 104 nationally listed standard dimensions. Meanwhile, No.51 (330 × 220mm) of KS T 1002 (1,100 × 1,100mm) was found to be the dimension that could bring about an improved loading efficiency, over 90.0% simultaneously in both the T-11 and T-12 pallet systems in a loading pattern configuration with the block pattern only, and the loading efficiency simulation results also confirmed this as the standard dimension that can be commonly applied to both the T-11 pallet (90.0%) and the T-12 pallet (90.7%) systems. Conclusions - The loading efficiency simulation results by loading pattern were analyzed: For the T-11 pallet system, 17 standard dimension sizes displayed the loading efficiency of 90.0% or more as block patterns, and the loading capacity was an average of 99.0%. For the T-12 pallet system, 35 standard dimension sizes displayed the loading efficiency of more than 90% as block patterns (the average loading efficiency of 98.6%). Accordingly, this study proposes that the standard dimensions of 17 sizes with the average loading efficiency of 99.0% should be applied in the use of the T-11 pallet system, and those of 35 sizes with the average loading efficiency of 98.6% should be reviewed and applied in the use of the T-12 pallet system.

• Journal of the Korea Concrete Institute
• /
• v.27 no.6
• /
• pp.651-659
• /
• 2015

Currently, social demands for long span building structures are increasing due to architectural planning purposes and economic efficiency. As a result, lighter board-type voiding materials were suggested. With the use of board-type voiding materials, a slab is able to become light weight and convenient. This process efficiently eliminates concrete where it is not required; considerably diminishing dead weight while maintaining the flexural strength of the slab. The reduction in concrete also allows for overall cost reductions and design flexibility. Also it can be ease with fixing the voided material that is composed of one body form. Although board-type voiding materials are ideal, the top and bottom concrete plates lack integrity. Because of this, test results show horizontal cracking towards the tops and bottoms of the concrete columns, or webs, connecting the slabs. The key to correcting this problem is to increase the shear strength. In order to increase the shear strength of the structure, horizontal shear area must increase. R70(100)-D-F has the largest horizontal shear area as it also shows stronger strength. As a result, shear strength ($V_{nh}$) is dependent on the horizontal shear area (N). $V_{nh}={\alpha}{\times}0.16{\sqrt{f_{ck}}}{\frac{{\pi}D^2}{4}}{\times}N({\alpha}=1.8125)$. The web columns have a shear span to depth ratio (a/d) that is less than 2; which classifies it as a deep beam. In this case, however, the shear strength of the deep beams may be as much as 2 to 3 times greater than that predicated conventional equations developed for members of normal proportions. As a result, ${\alpha}$ is suggested as an extra coefficient in the equation for shear strength ($V_{nh}$).

• Journal of the Korean Association of Geographic Information Studies
• /
• v.16 no.3
• /
• pp.54-67
• /
• 2013

This study deals with the characteristics of view landscape in modern Daegu city which were analysed employing geographic information system(GIS). The view landscape analysis was performed by using GIS that enables to overlap land use map with the map of range of visibility, and the 3-D simulation. The results are as follows; First of all, the ratio of forest is enormously high in the range of visibility. The distribution of landscape components allows the dwellers to obtain a clear view towards forests from anywhere. The landscape components include west eroded lowlands, east open rolling lands, east eroded lowlands, and high mountain areas: Apsan(Mt.) in the south; Waryoungsan(Mt.) in the west; and Hamjisan(Mt.) and Hakbong(Mt.) in the north. On the tops of those, people are able to secure a clear vision from the viewpoint towards the surrounding mountains because of the rural areas continuing from the viewpoint to the mountains. A continuous view landscape has been formed by these natural environmental factors. Finally, there are multiple view targets with relatively high altitude that are covered with forests in the space between the urban area and the outer mountains that are higher than the view targets, which provides a scenery of mountains overlapped by higher mountains.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.5
• /
• pp.856-865
• /
• 2010

Many efforts to develop the domestic fashion industry have continued under the influence of a rapidly changing fashion industry environment. The fashion industry has emerged as a future growth industry leading lifestyle and as a core industry for the culture biz. Since the 2000's the markets that combined party and fashion wear as a new cultural trend has grown and an in-depth study of design development for party wear is required. This study presents basic materials for design development for the future domestic woman character casual brand prior to the design development by analyzing design characteristics of domestic female character casual brands. In the research methods, nine brands were selected based on the discussion of ten fashion specialists and then the brand concept, target, configuration of items, price, and design characteristics were analyzed. The following conclusions were drawn from this study. First, each brand concentrated the main focus on establishing a clear and unique brand identity that meets the needs of consumers to enhance competitiveness in the woman's dress market. To enhance competitiveness, many character casual brands targeting women aged 20's and 30's (including BEART) held party wear goods exhibitions as the market for party wear has increased significantly. Second, according to study results of the selected nine brand designs, it was found that the style characteristic of each brand varies depending on concept. However, all nine brand designs developed various styles such as feminine and cute style making use of laces, ruffles, A line silhouette, colorful motifs, and a stylish style that used layers with various materials along with unique decorations based on romantic emotions. Third, seven hundred and thirty eight pictures of nine brands were analyzed by items without identifying brands. According to the result of the analysis, the percentage of items used by brands was as follows: a one-piece dress was 34.5%, jacket 25.7%, skirt and pants 15.5%, blouse and shirt 13.6%, and tops 10.6%. The result showed that one-piece dresses accounted for the highest percentage. Frill accounted for 16.6%, the highest percentage followed by ribbons at 16% in regards to detail and trimming.

• The Journal of Engineering Geology
• /
• v.25 no.3
• /
• pp.349-356
• /
• 2015

Although geophysical methods are useful and generally provide valuable information about the subsurface, it is important to recognize their limitations. A common limitation is the lack of sufficient contrast in physical properties between different layers. Thus, multiple methods are commonly used to best constrain the physical properties of different layers and interpret each section individually. Ground penetrating radar (GPR) and shallow seismic reflection (SSR) methods, used for shallow and very shallow subsurface imaging, respond to dielectric and velocity contrasts between layers, respectively. In this study, we merged GPR and SSR data from a test site within the Cheongui granitic mass, where the water table is ~3 m deep all year. We interpreted the data in combination with field observations and existing data from drill cores and well logs. GPR and SSR reflections from the tops of the sand layer, water table, and weathered and soft rocks are successfully mapped in a single section, and they correlate well with electrical resistivity data and SPS (suspension PS) well-logging profiles. In addition, subsurface interfaces in the integrated section correlate well with S-wave velocity structures from multi-channel analysis shear wave (MASW) data, a method that was recently developed to enhance lateral resolution on the basis of CMP (common midpoint) cross-correlation (CMPCC) analysis.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.30 no.3
• /
• pp.269-277
• /
• 2012

Street trees are one of useful urban facilities that reduce carbon dioxide and provide green space in urban areas. They are usually managed by local government, and it is effective to use aerial LIDAR data in order to acquire information such as the location, height and crown width of street tree systematically. In this research, algorithm was proposed that improves the accuracy of extracting top points of street trees and separates the region of individual street trees from aerial LIDAR data. In order to verify the proposed algorithm, a simulated aerial LIDAR data that exactly knows the number, height and crown width of street trees was created. As for the procedure of data processing, filtering that separates ground and non-ground points from LIDAR data was first conducted in order to separate the region of individual street trees. An estimated non-street tree points were then removed from non-ground points, and the top points of street trees were estimated. Region of individual street trees was determined by using the intersecting point of straight line that connects top point and ground point of street tree. Through the experiment by using simulated data, it was possible to refine wrongly estimated points occurred by determining tree tops and to determine the positional information, height, crown width of street trees through the determination of region of street trees.

• Journal of KIISE:Computing Practices and Letters
• /
• v.12 no.1
• /
• pp.66-77
• /
• 2006

In this paper, we researched the searching and tracking locations of a home resident using ON/OFF switches and sensors and designed a remote monitoring system. As an implementation environment, this system is developed on the base of the distributed object group framework we have developed from previous works. In order to trace the moving locations of a home resident, we firstly showed a home structure which attaches ON/OFF switches and sensors to home appliances and indoor facilities being fixed in home. Whenever a home resident opens/closes these objects, the signals operated from ON/OFF switches and sensors are sent to a home server system. In this time, the real locations of ON/OFF switches and sensors that the signals are being occurred must be the current location that he/she stays. A home server system provides the functionalities that map the real location of a resident in home to virtual location designed on remote desk-tops or terminals like PDAs, and that construct a healthcare database consisted of moving patterns, moving ranges, momentum for analyzing the given searching locations and times Finally, this system provides these information for remotely monitoring services.

• Journal of Korean Society of Forest Science
• /
• v.35 no.1
• /
• pp.56-60
• /
• 1977

This experiment was conducted to determine the responses of some pine species to acidity of cultured soils, and absorption behavior of alkaline elements and to observe the growth characteristics during afforesting period. The results were summarized as follows. 1. Total dry weight indicating growth volume was not much influenced by the acidity of cultured soils (pH 4~8) in all of the 4 species studied. Pinus koraiensis showed more dry weight than any other species, which indicated statistically significant difference. 2. T-R ratio of dry weight was not much affected by the acidity of cultured soils (pH 4~8) and the difference of cultured soils (pH 4~8) and by species. Growth phase also did not show remarkable change through the experiment period. 3. The average sodium content ratio in the plant body had no correlation with cultured soils (pH 4~8), bue significant differences were recognized among species statistically. 4. It was found that sodium content ratio was not much influenced by the cultured soils (pH 4~8), even when the tops and roots were separately analyzed. But, very significant difference was found among the species. Pinus koraiensis especially, showed greater volume growth maintaining low sodium content ratio than any other species, which indicates that Pinus koraiensis has unfavorable characteristics for growing on the seaside.

• Journal of Korean Home Economics Education Association
• /
• v.19 no.2
• /
• pp.103-114
• /
• 2007

The purpose of this study is to satisfy students in adolescent trends of school uniforms and to provide them with useful material with matching current fashions by analyzing the attitude of students toward uniform transformation in female highschool students and investigating factors influencing on behaviors of uniform transformation. The subjects of this study are 30 students in Daegu with the basic ways of investigating such as depth interview and survey. The results are as follows; First, students agree to wearing school uniforms. As the main reason for wearing school uniforms, students put emphasis on peer pressure. It is also analyzed that the figure of students' body have some influence on the attitude of students toward wearing uniform while students' appearance have no influence on the attitude of students toward wearing uniform. Second, students showed high satisfaction in school uniforms. While students are satisfied with design and color of school uniform, they are not satisfied with practicality, economic efficiency and the quality of textile. Third, the study shows most students have experience of uniform transformation as a result of depth interview about actual condition of uniform transformation. Whereas students usually wear the jacket with its width and length shortened, they tend to lengthen skirt and unstitch pleat of skirt. Fourth, there are many reasons for uniform transformation as a result of depth interview with students. Transformation for satisfying aesthetic desire tops the list, followed by transformation for matching, transformation for peer pressure. As shown by the results above, every school needs to make various efforts to satisfy students, teachers and parents by considering and using students' opinion in order to choose the better school uniforms. In addition, the study related to school uniform transformation need to have more various investigating ways to acquire more authentic results such as expanding the subjects to not only students but also teachers and parents and in-depth comparison between subjects.

• The Journal of the Acoustical Society of Korea
• /
• v.36 no.4
• /
• pp.254-260
• /
• 2017

The purpose of this study is to evaluate the sound absorption characteristics of a human body according to the amount of clothing worn by using reverberation method measurement method for developing standard test dummy, which can be used for testing absorption of occupied audience chair. Test method was based on the previous study (Conti et al., 2004), each experiment is conducted in the reverberation room and a subject wearing clothes is standing in that chamber. In this experiment, the sound absorption area of each frequency band according to the wearing of various material clothing was measured. As a result of measurements, the average sound absorption area of the whole frequency band was $0.25m^2-0.48m^2$ in case of a subject not wearing outer clothes, and $0.38m^2-0.98m^2$ in case of wearing of outerwear. Polyester tops by showing the maximum value, the highest characteristics in the 800 Hz to 1 kHz band among the rest of fiber materials. The outer jacket made of the wool and cotton materials show a higher absorption area as the frequency increases to the higher frequency band. The change of the sound absorption area according to the clothing amount was divided by the thermal resistance (clo) of the worn clothes and the weight per body surface area.