• Journal of Applied Tourism Food and Beverage Management and Research
• /
• v.13 no.2
• /
• pp.207-221
• /
• 2002

Wolaksan is a national park which has beautiful scenery with exposed rocks. The mountain is 1097 meters high and has 3 tops which are Jungang(the center), Arae(the lower part), Jjokduri. The highest point of the vertical cliff is 150m from the earth and the total circumferences of three tops is about 4km. These tops are easy to break by grains because they are from sedimentary rocks. Wolaksan is a bad mountain because the area is a Mosikjuk rocky area. However, the area around Wolaksan is thicky wooded and has many achievements and it makes good scenery. From top to southeastern, there are vertical cliff, The tops are originally from one but these are divided by partial weathering corrosion. The slide of path to Wolaksan is about 70。. The lower part of the mountain from Shinroksa to top has a gentle slope but there are a steep slope from the middle. Especially, the area has many rocks. The rocks of Wolaksan are almost granitic-gneiss or metamorphic rocks so it often fall down. Because of these fallen rocks, its valleys have great landscapes. The size of rock is less than 60cm. The landscapes of valleys such as Songgye, Dukju, Yonghwa are the main natural tourism resources.

• Journal of the Korean Society of Costume
• /
• v.66 no.5
• /
• pp.66-81
• /
• 2016

This study is designed to understand the problems of existing Korean male soldiers' winter uniform tops by researching its current state, and contribute to developing uniforms with improved size and motion appropriateness. Military bases were visited to research satisfaction of size and motion appropriateness of the current winter uniform tops. 193 soldiers were surveyed and interviewed, and the shape and fit of the standard sizes of the inner and outer layers of the current winter uniform were analyzed. Findings of this study are as follows. 1) Compared to the new combat uniforms that soldiers were wearing in their appropriate size (of the 44 sizes), there were many cases where the soldiers were not wearing winter uniform inner (of the 8 sizes) or outer (of the 18 sizes) layers in the correct size for their body. 2) A total of 37 combat uniform sizes appropriate for the body shapes were expected to be newly applied, and inside and outside layers of winter tops would be presented as sets of 14 different sizes in step with the new combat uniform sizes, instead of the existing 8 inside layer sizes and 18 outside layer sizes. 3) The inner and outer layer of the existing winter uniform tops had several problems with the shape and fit. First, the inner layer was shorter than the combat uniform. Its shoulder width was wide, but the sleeve length was short creating lack of coverage, and the angle connecting the sleeve and bodice was very small creating a high sleeve cap curve and narrow sleeve width that make motions difficult and cause discomfort. As for the outer layer, the hem moved up when soldiers bent over or adjusted the waist string so the top could not sufficiently cover, the shoulder width was wide and the sleeve length was short, requiring improvements.

• Asian-Australasian Journal of Animal Sciences
• /
• v.33 no.8
• /
• pp.1252-1264
• /
• 2020

Objective: To effectively utilize crop by-product resources to address the shortage of animal feed during the dry season in Africa, the community of natural lactic acid bacteria (LAB) of corn stover and sugarcane tops and fermentation characteristics of silage were studied in Mozambique. Methods: Corn stover and sugarcane tops were obtained from agricultural field in Mozambique. Silage was prepared with LAB inoculant and cellulase enzyme and their fermentation quality and microbial population were analyzed. Results: Aerobic bacteria were the dominant population with 10⁷ colony-forming unit/g of fresh matter in both crops prior to ensiling, while 10⁴ to 10⁷ LAB became the dominant bacteria during ensiling. Lactobacillus plantarum was more than 76.30% of total isolates which dominated silage fermentation in the LAB-treated sugarcane top silages or all corn stover silages. Fresh corn stover and sugarcane tops contain 65.05% to 76.10% neutral detergent fiber (NDF) and 6.52% to 6.77% crude protein (CP) on a dry matter basis, and these nutrients did not change greatly during ensiling. Corn stover exhibits higher LAB counts and water-soluble carbohydrates content than sugarcane top, which are naturally suited for ensiling. Meanwhile, sugarcane tops require LAB or cellulase additives for high quality of silage making. Conclusion: This study confirms that both crop by-products contain certain nutrients of CP and NDF that could be well-preserved in silage, and that they are potential roughage resources that could cover livestock feed shortages during the dry season in Africa.

• Railway Journal
• /
• v.19 no.2
• /
• pp.88-92
• /
• 2016

• The Journal of Natural Sciences
• /
• v.17 no.1
• /
• pp.89-101
• /
• 2006

The purpose of this study is to analyze the design preference according to the body consciousness for 20~26 years old male. The consciousness of body size and the satisfaction with body proportion were investigated. And the relationship between the body consciousness and the design preference was analyzed. Most subjects thought their body size was proper generally and their body proportion was proper or a little unsatisfied. The subjects preferred 'Round neckline', 'loose sleeve', and 'loose and long tops'. They didn't like the style that tops are under pants on the waist. They also preferred 'loose and long pants'. When the subjects chose clothing design, especially 'V-neckline tops' and 'short pants', they considered their height. They also considered their girth size and it meant they thought much of looseness. There was not any preference in clothing design according to the consciousness of height. The most significant relationships between the size consciousness and the preference in design was found in tops more than pants. The higher satisfaction with their body proportion was connected with the higher preference in some design. From all these result, it was found that the preference of clothing design could vary according to the consciousness of body size. The results from this study could give the important tips to improve the satisfaction with the clothing for each person.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.16 no.3
• /
• pp.179-189
• /
• 2014

Peplums have a great advantage in easy styling for wearers to acquire desired physical and reminiscent images depending on the type and where it is placed on the waist line. However, the study of peplum blouses has not yet recognized. This study suggests a baseline data for visual appraisals as a determined key factor is changes. The result of this study as follows: First, peplums published between 2012 through 2014 collections are used for decorative effects on tops or bottoms as the finest decoration details of fashioning women's physical attractiveness. Its application has been extended to various fashion themes such as belts and overskirt that are made of peplum itself. Second, peplums published between 2012 through 2014 collections have close correlation of how the position, shape, and length of peplums are attached on bottoms. Peplum effects are categorized as extension of tops, expansion of bottoms, connections of tops and bottoms, and separation of tops and bottoms. Third, total of seventy nine peplum blouses that are found in the domestic online shopping mall are analyzed. The total length of peplum blouses are generally produced to 56 to 61cm, which is little shorter than or approximately equal to the hip line of women aged in between twenty to twenty four. In addition, the most popular peplum design is made of flare and cutting lines on the waist line and is 45.56% of samples. The most common location of peplums is identified as 3 to 6 cm above the natural waist line or the natural waist line and is 78.47% of samples. Fourth, the key factor of peplum blouse that can significantly influence the visual image is the total length of blouse, position of peplum, and peplum shape.

• Fashion & Textile Research Journal
• /
• v.15 no.3
• /
• pp.423-429
• /
• 2013

This study helps out-size consumers purchase tops and improve the fitness of unde-weight women in their 20s-30s and by the establishment of a size system. The criteria for subjects in this study were those under 18.5($kg/m^2$) of the BMI; subsequently, a total of 233 females were enrolled. The results were: First, the nominal size for female adult formal dress suggested by the KS standard is suggested in 20 sections. The sections for underweight women are 7, (34 women who accounted for 14.59% out of 233 in total). The cover efficiency was 2.08% (which was very low). Second, tests showed that the average difference between the reference part body size of 7 sections for underweight women in the normal size section of bust cir.- hip cir.- height, and KS standard, waist cir. among reference sizes was rather small in the case of a nominal size for long height. Therefore, there is a significant difference with size in the KS standard and a sizing system proven improper for underweight woman. Third, the basic body sizes and reference body sizes were different due to the size system establishment according to measurements of underweight subjects. The research findings suggest that it is necessary to understand underweight types according to bust girth and hip girth sizes that represent basic sizes as well as to design patterns that consider the underweight body shape characteristics when women's tops are designed.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2006.11a
• /
• pp.17-20
• /
• 2006

It often happen water leakage that roof membrane have a poor condition such as direct exposed to rain, ultraviolet lays, temperature change compare with other part of waterproofing. There are difficult to maintain the quality of waterproofing and durability due to use only few waterproofing materials in practical in spite of development and use the various waterproofing material as solution of these poor condition. Therefore, in this thesis, I would like to know the property to apply field and suggest other method to develop for this waterproofing method to adopt various field condition for roof tops, as searching exposed and complex waterproofing technology for roof tops which is reinforced sheet using rising system have a regular pitch, depth, space.

• Fashion & Textile Research Journal
• /
• v.15 no.3
• /
• pp.358-363
• /
• 2013

Due to recent changes in increased life expectancy, economic power and social development, the new senior generation (focusing on people in their fifties) represents a new market power with strong competitiveness. The new senior generation is the generation after the baby boomers, with characteristics that include a high-level of education, increased income, a high-level of consumption, increased assets, self-fulfillment desires and individuality. Demands in the senior fashion industry are expected to gradually increase and the underwear industry that targets the new senior generation is expected to grow rapidly. These demands will require product development for the new senior generation based on emotional and socio-cultural characteristics. The current new senior underwear market is under the process of R&D with a focus on body shape changes; however, there are limited studies on emotional and socio-cultural approaches. This study formulates a basic design plan for different age groups based on an analysis of the situation of bra wear (current inconveniences, demand and needs) by women in their fifties and over. Subsequently, a functional active bra top that considers activity and comfort was proposed for women in their fifties, an all-in-one foundation bra top that shapes the body was proposed for women in their sixties, and comfort bra tops that are comfortable and easy to put on and take off were proposed for women in their seventies and over.

• Journal of the Korea Institute of Building Construction
• /
• v.6 no.4 s.22
• /
• pp.69-75
• /
• 2006

It often happen water leakage that roof membrane have a poor condition such as direct exposed to rain, ultraviolet lays, temperature change compare with other part of waterproofing. There are difficult to maintain the quality of waterproofing and durability due to use only few waterproofing materials in practical in spite of development and use the various waterproofing material as solution of these poor condition. Therefore, in this thesis, I would like to know the property to apply field and suggest other method to develop for this waterproofing method to adopt various field condition for roof tops, as searching exposed and complex waterproofing technology for roof tops which is reinforced sheet using rising system have a regular pitch, depth, space.