This study was performed in Bo-Eun Gun, Chung-Cheong Buk Do. The forest types having been classified, the each area was measured by dot-grid method. The 820 sample points having been obtained by systematic sampling method, the tree heights, crown densities, crown diameters in the points were measured on the aerial photography, and the volumes per hectare were estimated by the comparison with stereogram. Thirty eight plots, which amounted to about 4.5% of all the sample points, were sampled with double sampling method and volume were measured by the ground survey method. the results were summarized as follows; 1. There is no significant differentia between the values measure by dot-grid method and the statistical values obtained by the authority for the area. 2. There is no significant differentia between the estimated values and the measured values for the volume. And the coefficient (b) was 1.18. 3. The heights of conifer trees were easily measured more or less, but it was some difficult for the deciduous trees, because the tops of trees were not observed easily. 4. All the values had a tendencies to be overestimated in the low stocked stand and to be underestimated in the high stocked stand. 5. When the aerial volume table method by ground checking needs to be used together, the work should be performed by the experienced technician and the photgraphic volume table should be made in advanced of the work.
Transactions of the Korean Society of Automotive Engineers
/
v.22
no.5
/
pp.20-28
/
2014
The high velocity oxygen fuel spraying (HVOF) is a kind of surface modification process technology to form the sprayed coating layer after spraying the powder to molten or semi-molten state by the ultra-high speed at the high-temperature heat source and conflicting with a substrate. It is desirable to melt completely the thermal spray powder in order to produce the coating layer with an optimal adhesion, however, because a semi-molten powder in a spray process has the low efficiency and become a factor that degrades the mechanical property by the inducement of pore-forming within the coating layer. To improve the wear resistance, corrosion resistance and heat resistance, in this study, the plungers of high-speed and ultra-high pressure reciprocating hydraulic pumps for oil and water used in ironwork are produced with $420J_2$ and the coating layers of plungers are formed by the powders of WC-Co-Cr and WC-Cr-Ni including the high hardness WC. The surface of these plungers is modified by the super-mirror face grinding machine using variable air pressure developed in this laboratory, and then the characteristics of cross-sectional microstructure, and surface roughness and hardness values between no operation and 100 days-operation are examined and made a comparison. The fine tops and bottoms on surface roughness curve of oil-hydraulic pump plunger sprayed by WC-Cr-Ni are molded more and higher than those of water-hydraulic pump sprayed by WC-Co-Cr because the plunger diameter of oil-hydraulic pump is 0.4 times smaller than that of water-hydraulic pump and the pressure of oil-hydraulic pump exerted on the plunger is operated with the 70 bars higher than that of water-hydraulic pump. As a result, it is found that the values of centerline average surface roughness and maximum height for oil-hydraulic pump plunger are bigger than those of water-hydraulic pump plunger.
The purpose of this study was to examine the effect of growth hormone(GH) on the division and migration of the small intestinal epithelium in mice. Twenty mice(ICR), weighing initially about 10 g, aged 18 days were randomly subdivided in two groups of control and GH-treated group. Control group was sacrificied at 2 hr, 2, 3, 4 and 5 day after intraperitoneal injection of $^3H$-thymidine($^3H$-TdR, $4{\mu}$ Ci/gm of BW/day for 2 days). GH-treated group was injected subcutaneously with somatotropin(10 IU/mouse/day for 4 days) from 2 day ago of first $^3H$-TdR injection and then was sacrificied at 2 hr, 2, 3, 4 and 5 day after intraperitoneal injection of $^3H$-TdR($4{\mu}$ Ci/g of BW/day for 2 days). The small intestines were collected for autoradiogrophy and Hematoxylin counterstain. The location of the labeled epithelial cells(LEC) in villi of the small intestine was invested with light microscope. 1. In the control group, the LEC regions in the small intestine were located at crypts on 1 dsy, at $0%{\sim}15.9{\pm}3.6%$ of villus high value(VHV) on 2 day, at $0%{\sim}49.8{\pm}16.5%$ of VHV on 3 day, at $0%{\sim}95.3{\pm}6.9%$ of VHV on 4 day and $62.9{\pm}16.7{\sim}100%$ of VHV on 5 day, respectively. 2. In the GH-treated group, the LEC regions in the small intestine were located at crypts on 1 day, at $0%{\sim}39.2{\pm}9.5%$ of VHV on 2 day, at $0%{\sim}81.5{\pm}18.2%$ of VHV on 3 day, at $45.2{\pm}11.5%{\sim}100%$ of VHV on 4 day, at 85%~100% of VHV on 5 day, respectively. 3. VHV of tops in the LEC regions appeared to be 23.3% and 31.7% higher on 2 and 3 day, and VHV of the LEC region bases appeared to be 45.2%, 22.1% higher on 4 and 5 day, respectively in the GH-treated group than those observed in the control group. These difference was very highly significant(p<0.01).
Omolaiye, Gabriel Efomeh;Ojo, John Sunday;Oladapo, Michael Ilesanmi;Ayolabi, Elijah A.
Geophysics and Geophysical Exploration
/
v.14
no.1
/
pp.50-57
/
2011
For effective and accurate prediction of overpressure in the Efomeh field, located in the Niger delta basin of Nigeria, integrated seismic and borehole analyses were undertaken. Normal and abnormal pore pressure zones were delineated based on the principle of normal and deviation from normal velocity trends. The transition between the two trends signifies the top of overpressure. The overpressure tops were picked at regular intervals from seismic data using interval velocities obtained by applying Dix's approximation. The accuracy of the predicted overpressure zone was confirmed from the sonic velocity data of the Efomeh 01 well. The variation to the depth of overpressure between the predicted and observed values was less than 10mat the Efomeh 01 well location, with confidence of over 99 per cent. The depth map generated shows that the depth distribution to the top of the overpressure zone of the Efomeh field falls within the sub-sea depth range of 2655${\pm}$2m (2550 ms) to 3720${\pm}$2m (2900 ms). This depth conforms to thick marine shales using the Efomeh 01 composite log. The lower part of the Agbada Formation within the Efomeh field is overpressured and the depth of the top of the overpressure does not follow any time-stratigraphic boundary across the field. Prediction of the top of the overpressure zone within the Efomeh field for potential wells that will total depth beyond 2440m sub-sea is very important for safer drilling practice as well as the prevention of lost circulation.
The evolution dynamics of nanoscale Ge islands on both Si (001) and (113) surfaces is explored using ultraviolet photoelectron emission microscopy (UV-PEEM). Real-time monitoring of the in-situ growth of the Ge island structures can allow us to study the variation of the size, the shape and the density of the nanostructures. For Ge depositions greater than ${\sim}4$ monolayer (ML) with a growth rate of ${\sim}0.4\;ML/min$ at temperatures of $450-550^{\circ}C$, we observed island nucleation on both surfaces indicating the transition from strained layer to island structure. During continuous deposition the circular islands grew larger via ripening processes. AFM measurements showed that the islands grown on Si (001) were dome-shaped while the islands on Si (113) were multiple-side faceted with flat tops of (113)-orientation. In contrast, for Ge deposition with a lower growth rate of ${\sim}0.15\;ML/min$ on Si(113), we observed the shape transition from circular into elongated island structures. The elongated islands grew longer along the [$33\bar{2}$] during continuous Ge deposition. The shape evolution of the islands is discussed in terms of strain relaxation and kinetic effects.
Park, Yong-Ho;Lee, Chang-Woo;Lee, Kang-Suk;Lee, Jeong-Ho;Jo, Jae-Seong;Chung, Kyu-Hoi
Nuclear Engineering and Technology
/
v.24
no.2
/
pp.121-129
/
1992
Radio-tracer experiments on the Sr-90 absorption by rice and soybean from a sandy-loam soil of pH 6.35 treated with 5.2 and 31.2Bq Sr-90 per g-soil were carried out through pot cultivations. Sr-90 absorption rates of both crops increased till the mature stage when the rates were about 1.0%. Concentrations in their whole tops, however, decreased or changed little as they grew. Sr-90 concentrations in plant parts of both crops increased with the increase of those in soil. Soil-to-plant transfer coefficients of Sr-90 for rice and soybean at mature stages ranged, on the dry weight basis, from 0.07(unpolished seed) to 3.67(lean and from 0.86(seed) to 9.26(leaf), respectively. Only the unpolished rice seed showed a significant difference in the coefficient with 0.17 in 5.2Bq treatment and 0.07 in 31.2Bq treatment. Sr-90 retention rates of the upper 15cm soil after crop harvests were about 80% Sr-90 absorptions had no effect on the plant growth and yield of the crops.
Transactions of the Korean Society of Automotive Engineers
/
v.24
no.3
/
pp.285-293
/
2016
The high velocity oxygen fuel(HVOF) thermal spray is a kind of surface modification techniques to produce the sprayed coating layer. This process is to form the coating layer after spraying the powder to molten or semi-molten state by the ultra-high speed at the high-temperature heat source and conflicting with a substrate. The efficiency of thermal spraying is dropped, however, because the semi-molten powder in a spray process become a factor that degrades the mechanical property by the formed pore within the coating layer. Therefore, it is necessary to melt completely the thermal spray powder in order to produce the coating layer with an optimal adhesive force. In this study, to improve the wear resistance, corrosion resistance and heat resistance, the plungers of high-speed and ultra-high pressure reciprocating hydraulic pumps used in ironworks are manufactured with STS $420J_2$ and are coated by the powders of WC-Co-Cr and WC-Cr-Ni including the WC of high hardness using a HVOF thermal sprayer developed in this laboratory. These are called by the surface-modified plungers. The surface roughness, hardness, and surface and cross-sectional microstructure of these two surface-modified and conventional ceramic plungers are measured and compared before operation with after operation for 100 days. It is found that the values of centerline average surface roughness and maximum height for conventional ceramic plunger are 9.5 to 10.8 and 5.2 to 5.7 times higher than those of surface-modified ones coated by WC-Co-Cr and WC-Cr-Ni because the fine tops and bottoms on surface roughness curve of conventional ceramic plunger are approximately 100 times higher than those of surface-modified ones. In addition, the pores and scratches in the surface microstructure are considerably formed in the order of conventional ceramic, WC-Cr-Ni and WC-Co-Cr surface-modified plungers. The greater the WC content of high hardness powder is less the change in the plunger surface.
(1) The present work is a study on the tolerance of salt concentration, salt injuries and growth, under varied conditions, of salt concentration of five kind silvicultural species. (2) Pinus thunbergii, which is tolerant of stat, has shown both low fresh leaf's pH and low gravity, while Pinus densiflora, Abies bolophylla and Pinus koraiensis have respectively shown high fresh leaf's pH and high gravity. (3) Pinus thunbergii, which is tolerant otosalt, has shown high water content ind its lead, hbile such speciesras Pinus densiflora an Abies lophylla, which are intolerant of salt have shownlow water content in their leaves. (4) A signifficance has ibeen found, in the nonreatment fresh les's pH and n gravity, among Pinusthunbergiis Pinu rigida, Pinus koraiensis, Pinus densiflora and Abies holophya. (5) The order of thetlolerance of salt among the tested species is as foohws : Pinus thunbergii, P. Korea iensis, Abies holopylla. (6) The signs of salt injuries have been observed at the tops of the trees 2~3 hours after the application of 1.5% salt solution in the case of Abiihs holop hylla which are intolerant of salt, while they have been of served at the same position 4~6 hours after the 1.5% application in the case of Pinus Koraiensis and Pinus thunbergii.
The purpose of this study was to promote the utilization of wind velocity of kitchen and bathroom exhaust ducts for wind power generation in high-rise apartments. The research content can be summarized as follows: 1) Nine high-rise apartments were examined for the installation of kitchen and bathroom exhaust ducts located in the pipe shaft (PS) section. After selecting simulation candidates, a simulation was performed with the STAR-CCM+ Ver 5.06 program. 2) Of nine high-rise apartments, seven had kitchen and bathroom exhaust ducts, whose cross section was in the range of $0.16m^2{\sim}0.4m^2$. The area ratio between the exhaust ducts and PS section (cross section of exhaust duct/area of PS section ${\times}$ 100) was on average 3.2%. 3) The simulation results were analyzed. As a result, the smaller cross section kitchen and bathroom exhaust ducts had, the more advantages there were for increasing exhaust wind velocity. If an out air inlet duct is installed to the old kitchen and bathroom exhaust ducts, it will increase exhaust wind velocity by 3.01~3.98m/s and contribute to the proper wind velocity level (3.0m/s). 4) When the simultaneous usage rate between the kitchen and bathroom exhaust fan increased from 20% to 60%, exhaust wind velocity increased. The "entire house holds" condition for exhaust fan operation provided more even exhaust wind velocity than the "some house holds" condition. 5) Exhaust wind velocity increased in the order of amplified (T-3), induced (T-2) and vertical (T-1) top of kitchen and bathroom exhaust ducts. Of them, the amplified type (T-3) was under the least influence of external wind velocity and thus the most proper for kitchen and bathroom exhaust duct tops.
Journal of the Korean Institute of Landscape Architecture
/
v.30
no.5
/
pp.1-15
/
2002
The purpose of this study is to consider the relationship between point of view and prospect behavior occurring in the experience of a painted landscape. This study analyzes one hundred scenes from the 'real landscape painting' by Kyumjae, one of the most famous landscape painters in 18th century Korea. The results of the study are as follows: 1. It clarified that Kyumjae's real landscape painting's 100 scenes have many view points such as roads, bridges, pavilions, mansions, towers, terraces, hillsides, bases of mountains, broad flat roots, brooksides, and ferries that are apt to occur in the experience of a landscape. The spatial characteristics of view points are expanded fields of vision, evening and night scenes, edges of landforms and structures from which to improve ones vantage point. 2. It showed that 99 out of real landscape painting's 100 scenes depict a view point'to look'and 79 of 'to look through', 73 of 'look around'and 24 of 'to look over'. 3. It showed that real landscape painting's 100 scenes depict that the view point 'to look' is mainly upon a road from which people are looking over an elevated landscape such as the top of a mountain or rockwall. The view behaviors of looking down are depict 15 pavilions, 14 mansions, 2 broad rocks and 10 mountain tops on which people experience landscapes such as fields, rural communities and streams. The view behaviors to look depict 33 ships, 24 roads, 24 pavilions, 19 mansions and 12 terraces on which people experience landscapes such as distant views of mountains, rivers and landscapes. The view behaviors to look around to obtain orientation of landscape are depict 16 pavilions, 10 mountaintops. To glimpse on the way of journey depict 33 ships and 29 roads. To look over depict 11 mansions and 6 pavilions on which experience borrows the landscape. To look through landscapes such as rivers, mountains and rockwalls depict 15 roads, 14 pavilions and 11 mansions. To exchange looks depict 30 ships, 14 roads, 12 pavilions and 12 mansions. We expect that these results might give clues toward the experience of landscapes and the practice of landscape design methods which select viewpoints, and in the design of view points suitable to prospect behaviors.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.