• 제목/요약/키워드: TOPS

검색결과 216건 처리시간 0.027초

아메카지 남성복 패션 브랜드의 색채 특성 연구 (A Study on the Color Characteristics of Amekaji Menswear Fashion Brands)

  • 김지형
    • 패션비즈니스
    • /
    • 제27권3호
    • /
    • pp.75-95
    • /
    • 2023
  • This study aims to investigate the color characteristics and utilization of Amekaji fashion in the domestic casual market, with a focus on menswear. A total of 1,882 color data were extracted from 11 representative brands of Amekaji. This results of the study showed that PB, Bk, YR, and Y colors were highly utilized in the overall color, and dkg, g, ltg, and p tones were highly utilized. In particular, R color was highly utilized in the point color, as it was developed into six tones, including v, with high saturation. The analysis by the brand showed that the highest number of colors were extracted from 'Kapital', which is famous for its vintage-style patchwork and dyeing, and that 'PB' and 'Bk' were heavily utilized. By the item, PB colors were mainly utilized for denim, and shirts were diversified with 9 tones. W, a neutral color, was mainly used on clothing tops such as shirts, knits, and T-shirts. This study provides valuable insights into the color sensitivity of Amekaji fashion, which can be used as a useful resource for design development and product planning in the industry. As a future study, we suggest analysis of the utilization of Amekaji colors in the Korean men's casual market along with American and Japanese brands.

가슴이 큰 여성의 상반신 체형 유형 (Upper Body Type of Women with Large Busts)

  • 차수정
    • 패션비즈니스
    • /
    • 제27권5호
    • /
    • pp.26-43
    • /
    • 2023
  • This study sought to typify and characterize the upper body shape of women with large breasts by classifying only Korean adult women aged 20-69 years whose difference dimension between bust and underbust circumference was 12.5 cm or greater. This study attempted to provide necessary information for the development of upper body clothing for women with large busts. Upper body horizontal, upper body height, shoulder size, upper body length, and shoulder slop factor were extracted to constitute upper body shapes of women with large busts. Upper body shapes of women with large busts were classified into four types: low obese upper body tall body type, high normal upper body short body type, drooping shoulders slender upper body tall body type, and broad shoulders slender upper body short body type. Upper body proportions of women with and without large busts were analyzed as follows. Women with large breasts had narrower shoulder width compared to bust width and waist width. Their underbust and waist circumferences were larger than their bust circumferences. For the development of tops for women with large busts, bodice pattern development was required, taking into account shoulder width, chest, and upper body length. Future studies should focus on angles of busts in more detail. Research should be conducted on the development of bodice by upper body type of women with large busts analyzed.

밀착의복 의복압에 영향을 미치는 변인 탐색 -실제착의와 가상착의 비교- (Exploring Variables Affecting the Clothing Pressure of Compression Garment -A Comparison of Actual Garments and Virtual Garments-)

  • 김남임;이효정
    • 한국의류학회지
    • /
    • 제47권6호
    • /
    • pp.1080-1095
    • /
    • 2023
  • Three-dimensional virtual fitting has become a trending practice in the fashion industry because of its productivity benefits, allowing garments to be virtually worn by avatar models without physical production. This study analyzed the variables influencing clothing pressure in both real and virtual fittings to expand the potential utility of pressure data derived from the latter. For this purpose, six sets of compression garments were created by combining two types of tricot fabrics and three types of reduced-pattern tops, with the clothing for real and virtual fittings having identical dimensions. Focus was directed to analyzing the correlation among clothing pressure, surface area deformation, and the mechanical properties of the fabrics. In real fittings, clothing pressure was influenced by multiple factors, including garment design, pattern reduction ratio, body shape, and fabric properties, consistent with existing knowledge. In virtual fittings, however, only the digital mechanical characteristics of the fabrics significantly influenced clothing pressure. The findings suggest that a more reliable implementation of clothing pressure in virtual fitting programs necessitates an approach that considers the complex structural information of garments.

질소시용, 예초 및 재식밀도가 한국잔디(Zoysia Japonica Steud)의 생육에 미치는 영향 (Studies on the growth of Korea Lawn Grass (Zoysia japonica Steud.)in Reponse to Nitrogen Application, Clipping Treatment and Plant Density)

  • 심재성
    • 자연과학논문집
    • /
    • 제1권
    • /
    • pp.61-113
    • /
    • 1987
  • The increasing emphasis placed on the production of fine turf for lawns, golf courses, parks, and other recreational sites has led to many unsolved problems as to how such turf could be best established and mainteined. For this purpose, a series of experiments were conducted under con ditions of pot and field. The results obtained were as follows EXPERIMENT I. The effect of nitrogen fertilizer and clipping interval on Zoysia japonica. 1. Increasing the rate of nitrogen and frequent clipping increased tiller number of Zoysis japonica and the maximum number of tillers were obtained from 700 kg N application and freqnent clippings (10 days interval ) in October. Treatment of 350kg N with 10 days clipping interval increased tillers much more than those of 700 kgN with 20 and 30 days clipping intervals. 2. The average number of green leaves occurred during the growth period maximized by applying 700 kg N and clipping 10 days interval. 3. Increasing tiller numbers significantly decreased tops DM weight per tiller by clipping plants at interval of 10 and 20 days, irrespective of nitrogen applied, and with nil N, at the interval of 30 days. By applying 700 kg N, however, top DM weight per tiller increased as the number of tillers increased consistently. 4. The highest top DM weight was achieved from late August to early September by applying 350 and 700kgN. 5. During the growth period, differences in unders ( stolon + root ) DM weight occurred bynitrogen application were found between nil N and two applied nitrogen levels, whereas, at the same level of nitrogen applied, the increase in stolon DM weight enhanced by lengthening the clipping interval to 30 days. 6. Nitrogen efficiency to green leaves, stolon nodes and DM weight of root with high nitrogen was achieved as clipping interval was shortened. 7. By increasing fertilizer nitrogen rate applied, N content n the leaves and stems of Zoysiajaponica was increased. On the other hand, N content in root and stolon had little effect onfertilizer nitrogen, resulting in the lowest content among plant fractions. The largest content of N was recorded in leaves. Lengthening the clipping interval from 10 or 20 to 30 days tends to decrease the N content in the leaves and stems, whereas this trend did not appeared in stolon androot. 8. A positive correlations between N and K contents in tops and stolon were established andthus K content increased as N content in tops and stolon increased. Meanwhile, P content was not affected by N and clipping treatments. 9. Total soluble carbohydrate content in Zoysia japonica was largest in stolon and stem, and was reduced by increasing fertilizer nitrogen rate. Reduction in total soluble carbohydrate due to increased nitrogen rate was severer in the stolons and stems than in the leaves. 10. Increasing the rate of nitrogen applied increased the number of small and large vascular bundles in leaf blade, but shortened distance among the large vascular bundles. Shortening the clipping interval resulted in increase of the number of large vascular bundles but decrease ofdistance between large vascular bundles.EXPERIMENT II. Growth response of Zoysia japonica imposed by different plant densities. 1. Tiller numbers per unit area increased as plant density heightened. Differences in num ber between densities at higher densities than 120 D were of no significance. 2. Tiller numbers per clone attained by 110 days after transplanting were 126 at 40D,77 at 80D, 67 at 120D, 54 at 160D, and 41 at 200D. A decreasing trend of tiller numbers per clone with increasing density was noticable from 100 days after transplanting onwards. 3. During the growth period, the greatest number of green leaves per unit area were attainedin 90days after transplanting at 160D and 200D, and 100 days after transplanting at 40D, 80Dand 120D. Thus the period to reach the maximum green leaf number with the high plantdensity was likely to be earlier that with the low plant density. 4. Stolon growth up to 80 days after transplaning was relatively slow, but from 80 daysonwards, the growth quickened to range from 1.9 m/clone at 40D to 0.6m/clone at 200Din 200 days after transplanting, these followed by the stolon node produced. 5. Plant density did not affect stolon weight/clone and root weight/clone until 80 daysafter transplanting. 6. DM weight of root was heavier in the early period of growth than that of stolon, butthis trend was reversed in the late period of growth : DM weight of stolon was much higherthan that of root.EXPERIMENT Ill. Vegetative growth of Zoysia japonica and Zoysia matrella as affected by nitrogen and clipping height. 1. When no nitrogen was applied to Zoysia japonica, leaf blade which appeared during theAugust-early September period remained green for a perid of about 10 weeks and even leavesemerged in rate September lived for 42 days. However, leaf longevity did not exceed 8 weeks asnitrogen was applied. In contrast the leaf longevity of Zoysia matrella which emerged during the mid August-earlySeptember period was 11 weeks and, under the nitrogen applied, 9 weeks, indicating that thelife-spen of individual leaf of Zoysia matrella may be longer than that of Zoysia japorica. Clipping height had no effect on the leaf longevity in both grasses. 2. During the July-August period, tiller number, green leaf number and DM weightof Zoysia japonica were increased significantly with fertilizer nitrogen, but were not with twolevel of clipping height. This trend was reversed after late September ; no effect of nitrogen wasappeared. Instead, lax clipping increased tiller number, green leaf number and DM weight. Greenleaves stimulated by lax clipping resulted in the occurrance of more dead leaves in late October. 3. Among the stolons outgrown until early September, the primary stolon was not influencedby nitrogen and clipping treatments to produce only 2-3 stolons. However, 1st branch stoIon asaffected by nitrogen increased significantly, so most of stolons which occurred consisted of 1st branch stolons. 4. Until early September, stolon length obtained at nil nitrogen level was chiefly caused bythe primary stolons. By applying nitrogen, the primary stolons of Zoysia japonica waslonger than 1st branch stolons when severe clipping was involved and in turn, shorter than 1stbranch stolons when lax clipping was concerned. In Zoysia matrella, 1st branch stolons were muchlonger than the primary stolon when turf was clipped severely but in conditions of lax clippingthere was little difference in length between primary and 1st branch stolons. 5. Stolon nodes of both Zoysia japonica and Z. matrella were positively influenced by nit rogen, but no particular increase by imposing clipping height treatment was marked in Zoysiamatrella. Although the stolon of Zoysia japonica grew until late October, the growthstimulated by nitrogen was not so remarkable as to exceed that by nil N.

  • PDF

EFFECT OF WORK CRUSHING SUGARCANE ON PREGNANCY AND LACTATION IN CATTLE AND BUFFALOES

  • van Thu, N.;Pearson, R.A.;Preston, T.R.;Fajersson, P.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제9권4호
    • /
    • pp.427-438
    • /
    • 1996
  • The suitability of female cattle ($Brahman{\times}Holstein$) and buffaloes (Murrah / Jafarabadi) for work on a sugarcane crusher was tested. The animals were fed chopped sugarcane tops and elephant grass supplemented with rice bran and urea-molasses blocks. In experiment 1, six cattle and six buffaloes, (with three animals seven to eight months pregnant at the start of the experiment in each group), worked individually, alternate weeks for 90 minutes a day for 6 d/week. Within the 90 min, cattle did more work than buffaloes (p < 0.05), and non-pregnant animals did more than pregnant animals, but cattle crushed significantly (p < 0.05) more cane per day than buffaloes. During work animals lost weight, but gained the weight back during resting weeks, when fodder intakes were higher. There were no significant differences in live weight change and fodder intakes between pregnant and non-pregnant animals during the six weeks. In experiment 2, four pairs of lactating cows and buffaloes crushed sugarcane for 3 h/d, 6 d/week for three weeks. Work done was higher in cattle than buffaloes, but cane crushed was marginally lower. All animals lost weight during work, particularly in the first week, but gained weight during the week after work. Daily milk yield was lower during the working weeks ($-0.55{\pm}0.15kg$) than in the week before work. Butter fat yield showed no significant change. One buffalo showed ovarian activity and oestrus behaviour during the work. Two cows showed ovarian activity within one month after the work. It was concluded that pregnant and lactating cows and buffaloes can effectively operate a cane crusher, however a temporary reduction in milk yield can be expected in the working period, and ovarian activity may be suppressed.

'비대칭 접음 삼각 무' 적삼·한삼에 대한 고찰 (A Study of 'Asymmetry Triangle-Gusset' with Shirts [Jeoksam and Hansam] in the Early Days of Joseon Dynasty)

  • 진덕순;김진경;송미경
    • 복식
    • /
    • 제63권8호
    • /
    • pp.76-89
    • /
    • 2013
  • This study is about 'asymmetry triangle-Mu' Jeoksam and Hansam in the early days of Joseon Dynasty. A study was done regarding the records of Jeoksam and Hansam in literature, the present state of the excavated 'asymmetry triangle-Mu' clothing Jeoksam and Hansam, and finally a deduction of the reason for the appearance of the 'asymmetry triangle-Mu' clothing Jeoksam and Hansam. The width of front length of 'asymmetry triangle-Mu' clothing in the early days of Joseon Dynasty is 29.5~35 cm and the width of one breath of the sleeve is 29.5~35 cm. The width of 'asymmetry triangle-Mu' is 9.5~16 cm and it is relatively big. Comparing to the width of one breath of the sleeve, it is almost 1:2.2~3.6 ratio. Therefore, when the sleeve was cut, the Mu was linked in order to save fabric the gusset of sleeve had to be folded and turned, and finally it became asymmetric. As a result of the above consideration, since the width of upper garments of $16{\sim}17^{th}$ century was big, the wearing of short tops of Jeoksam or Hansam without side vent as a small 'triangle-Mu' was uncomfortable. Because of this reason, the size had no option but to become bigger. So, during the $16^{th}$ and $17^{th}$ century, a period where mass production of fabric was difficult, the 'asymmetry triangle-Mu' type was considered to be a reasonable cutting method. After the middle of $17^{th}$ century, it can be estimated that 'asymmetry triangle-Mu' clothing disappeared according to the narrow aspect of clothing type.

번들 사장교 가설 구조물 설계력 산정을 위한 버페팅해석 (Buffeting Analysis for the Evaluation of Design Force for Temporal Supports of a Bundle Type Cable-stayed Bridge)

  • 이호;박진;김호경
    • 한국전산구조공학회논문집
    • /
    • 제24권6호
    • /
    • pp.645-654
    • /
    • 2011
  • 복층거더 번들형 사장교의 대블럭 가설 중 내풍안정성 확보를 위해 잭업바지 위에 임시벤트를 설치하여 가설 구조계를 지지하는 방안이 검토되었다. 일반적으로 거스트 계수를 곱한 정적 항력으로 임시벤트를 설계하는 경우 거더의 버페팅력에 의해 발생되는 임시벤트의 축력 변동성분을 고려할 수 없으며, 이는 일부 설계기준에 제시된 정적 상향 풍력으로도 평가할 수 없다. 유용한 해결 방안으로 주파수영역 버페팅해석을 수행하고 임시벤트에 작용하는 거더의 반력을 산정하였다. 우선 임시벤트를 해석 모델에 포함하고 거더와의 동적 상호작용을 엄밀히 반영하는 해석을 수행하였으며, 그 결과를 임시벤트가 거더를 받치는 고정 지지점으로 간주하여 해석한 경우의 결과와 비교 검토하였다. 임시벤트의 강성을 고려하는 경우 산정된 임시벤트와 거더 간 작용력은 임시벤트를 고정 지지점으로 간주하여 얻은 반력에 비하여 작은 값을 보였다. 따라서 대상교량의 가설 구조물 내풍설계를 수행하는 경우 임시벤트가 포함된 해석 모델링의 필요성과 버페팅해석을 통한 동적내풍 설계의 유용성을 제시하였다.

골프 어프로치 스윙 시 거리변화와 성공·실패에 따른 EMG 차이 분석 (Analysis on Differences in Muscle Activities Depending on Distance Changes and Success or Failure in Connection with Golf Approach Swings)

  • 이경일;유문석;홍완기
    • 한국운동역학회지
    • /
    • 제25권1호
    • /
    • pp.21-28
    • /
    • 2015
  • Objectives : The purpose of this study was to compare differences in muscle activities according to distance changes, and success or failure in relation to approaches during a round of golf in order to obtain basic data on golf swings. Methods : To achieve our research goal, we asked eight professional golfers playing for the Korea Professional Golfers' Association (height: $1.76{\pm}0.05m$, weight: $73.87{\pm}9.21kg$, career duration: $12.87{\pm}4.48yr$) to perform approach swings at distances of 30, 50, and 70 m. Results : No differences were observed in the muscle activity of the extensor carpi radialis that were caused by the distance changes. In addition, we found that the wrist extensors seemed unaffected by the increase in approach distance. Also, we found that the powers of the approach shots were driven by efficient movements rather than by the strength of the arms. We confirmed that when the distance of the approach increased, the golfers should perform their back-swing tops and follow-through right from the right to the left pelvic limb. To achieve successful approach swings despite distance changes, golfers should first work on the activity of the erector spinae to prepare for rotatory power in the P1 section. Moreover, golfers should increase the activity of the erector spinae on the left when they need to deal with the distance improvements in the P2 and P3 sections. Conclusion : In the light of the discussion above, we may infer that despite approach distance changes during a round of golf, ideal swings can be realized by consistent activities of the wrist extensor muscles and improved performances of the pelvic limb muscles. Furthermore, this study suggests that golfers should improve the consistency of muscle activities in all the other body parts to achieve the ideal swing.

Sintering behavior and mechanical properties of zirconia compacts fabricated by uniaxial press forming

  • Oh, Gye-Jeong;Yun, Kwi-Dug;Lee, Kwang-Min;Lim, Hyun-Pil;Park, Sang-Won
    • The Journal of Advanced Prosthodontics
    • /
    • 제2권3호
    • /
    • pp.81-87
    • /
    • 2010
  • PURPOSE. The purpose of this study was to compare the linear sintering behavior of presintered zirconia blocks of various densities. The mechanical properties of the resulting sintered zirconia blocks were then analyzed. MATERIALS AND METHODS. Three experimental groups of dental zirconia blocks, with a different presintering density each, were designed in the present study. Kavo $Everest^{(R)}$ ZS blanks (Kavo, Biberach, Germany) were used as a control group. The experimental group blocks were fabricated from commercial yttria-stabilized tetragonal zirconia powder (KZ-3YF (SD) Type A, KCM. Corporation, Nagoya, Japan). The biaxial flexural strengths, microhardnesses, and microstructures of the sintered blocks were then investigated. The linear sintering shrinkages of blocks were calculated and compared. RESULTS. Despite their different presintered densities, the sintered blocks of the control and experimental groups showed similar mechanical properties. However, the sintered block had different linear sintering shrinkage rate depending on the density of the presintered block. As the density of the presintered block increased, the linear sintering shrinkage decreased. In the experimental blocks, the three sectioned pieces of each block showed the different linear shrinkage depending on the area. The tops of the experimental blocks showed the lowest linear sintering shrinkage, whereas the bottoms of the experimental blocks showed the highest linear sintering shrinkage. CONCLUSION. Within the limitations of this study, the density difference of the presintered zirconia block did not affect the mechanical properties of the sintered zirconia block, but affected the linear sintering shrinkage of the zirconia block.

Physiological Responses of Soybean Cultivars to Fusarium solani f. sp. glycines Causing Sudden Death Syndrome

  • Joon Hyeong, Cho
    • 한국작물학회지
    • /
    • 제44권4호
    • /
    • pp.373-381
    • /
    • 1999
  • Six soybean cultivars having different SDS susceptibility were planted with sorghum seedinoculum infested with F. solani isolate 171 in the greenhouse. First leaf symptoms appeared on unifoliar leaves at 9 days after inoculation and all cultivars showed the typical leaf symptoms at 13 days after inoculation, when trifoliar leaves emerged. Leaf symptoms development in susceptible cultivars was faster than in resistant cultivars. Leaf symptom severities during the period of 25 to 29 days after inoculation showed a significant difference between cultivars which had SDS resistance and sus ceptibility. In this period, area under the diseaseprogress curve (AUDPC) of Hartz 6686 was the highest and that of PI 520733 was the lowest. SDS caused serious damage to the growth of soybean in all cultivars. Average reductions of growth rate of root fresh weight and dry weight were greater than those of plant tops. Duyu-kong showed less severe leaf symptoms than that of SDS suscetible cultivars; however, average growth rate of plants top and roots of this cultivar was less but not significantly different than those of SDS susceptible cultivars. In all cultivars, as severity of leaf symptoms increased, plant top weight decreased. Root rot symptoms were observed in all cultivars before leaf symptoms appeared. Average proportions of tap root reddish-brown discoloration of all cultivars was up to 75 % at 15 days after inoculati on; however there was no significant differenc between cultivars at each rating date. Appearances of leaf symptoms on leaves varied in each cultivar. SDS resistant cultivars had a significantly higher level of crinkling than susceptible cultivars and SDS susceptible cultivars had a significantly higher level of necrosis than resistant cultivars. Further study will be needed to identify the relationships between the physiological growth rate and SDS severities in soybeans.

  • PDF